Designed as the successor of the Douglas DC-3 the Fokker F-27 Friendship was a 28 seat passenger plane engineered and commissioned in the late 1950s. The F-27 served many years successfully as a passenger craft but would later take on a successful role as an air cargo ship. With a payload of 6 tonnes the Fokker F-27 is still in service today and is a popular choice for express cargo shipments.
Featuring a full fiber glass fuselage with built up ply and balsa construction this model is sure to attract attention. Two 28 size 1600kv brushless out runners will be required for (one for each wing) along with a 30Amp ESC for each motor. Five 9g servos will be required as the model features a twin servo elevator setup with a shared servo for rudder and the steerable nose wheel. All the general hard ware (Push rods, screws, landing gear etc) is included to get this kit underway. You will also require your own transmitter and receiver (Tx/Rx).
This is not a beginners model and some modeling experience will be required to complete this kit. However the finished product will be of a high quality and will last a life time.
Spec.
Wing Span : 1200mm
Length : 1000mm
Wing Area: 18dm2
Model Weight: 1400g
Servo: 5 x 9g (Not included)
Motor: 2 x 26~28 series Brushless outrunner 1600Kv or higher (Not included)
ESC: 2 x 30A (Not included)
Required.
Your own TX & RX
5 x 9g
2 x 26~28 Brushless Motor
2 x 30A ESC
Battery: 11.1v 2200mah 3S1P (or greater)
PRODUCT ID: F-27Kit
| 
.jpg)
.jpg)
.jpg)
