USA warehouse now open. Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
More than just a fancy name. TURNIGY nano-tech lithium polymer batteries are built with an LiCo substrate complex greatly improving power transfer making the oxidation/reduction reaction more efficient, this helps electrons pass more freely from anode to cathode with less internal impedance. In short; less voltage sag and a higher discharge rate than a similar density lithium polymer (non nano-tech) battery.For those that love graphs, it means a straighter, longer curve. For pilots it spells stronger throttle punches and unreal straight-up performance. Excellent news for 3D pilots! Unfortunately with other big brands; numbers, ratings and graphs can be fudged. Rest assured, TURNIGY nano-tech's are the real deal, delivering unparalleled performance! Spec.Capacity: 4000mAhVoltage: 3S1P / 3 Cell / 11.1VDischarge: 45C Constant / 90C BurstWeight: 375g (including wire, plug & case)Dimensions: 164x62x23mmBalance Plug: JST-XHDischarge Plug: 4mm Bullet-connector PRODUCT ID: N4000.3S.45
HXT 4mm connectors, PRODUCT ID: AM1009x10 is sold in the US warehouse and is the same thing as found on this battery. It is what I used to finish a power harness for a quad.
Just received 2 batteries. One had cells with voltage 3.9, 1.5, and 3.9. Do I try charging it or is that one low cell dead?? Will wait for an intelligent response before I risk it.
You can charge it back to life,but first you need to discharge it down until the two 3.9 cells get down to discharge level.Then charge it at 1/2c.Sometimes this works sometimes it does not.On discharge if you have a balance charger it will only take down the 3.9 cells.Hope this helps.Good luck.JK.
Copyright 2012 Hextronik Limited.
The HobbyKing.com®, OrangeRx, Turnigy, Durafly, nano-tech and other brand logos and names are trademarks of hexTronik Limited.
All rights reserved
.jpg){kind=small}
.jpg){kind=small}
