Hobbyking SS Series 190-200A ESC (AUS Warehouse)

Item found in the following categories;
> Speed Controllers > All Speed Controllers
> Speed Controllers > HobbyKing ESC
> Speed Controllers > Above 80 Amp

RATED:


	Hobbyking SS Series 190-200A ESC (AUS Warehouse)

Hobbyking SS Series 190-200A ESC (AUS Warehouse)

The Hobbyking SS series comes with a limited range of programming functions and are designed to be plug-n-play.
A perfect ESC for those looking for something simple to use and economic.

Spec.
Weight: 85g
Size: 70x50x13mm
Cells: 2-7S Li Po
Max Current: 190A
Burst : 200A
No BEC
Timing: 1/7/15/30 programmable
PWM: 8/16K

Features.

Constant current 190A Max 200A <10S

Li-Poly 2-7 cells

Dynamic Braking

BEC: opto

Auto shut down when lose signal

Slow down at 3.0V per cell Lipo, Cut-off at 2.9V per cell Lipo 0.8V NiMh

User Programming options.
Battery setting
Throttle Range
Brake setting 4 options: Direction and Cutoff Type
Timing Mode Setting: 1 / 7 / 15 / 30
PWM setting: 8K/16K

Note:
This ESC is OPTO, with no BEC supplying power to your receiver. You will need an extra power source for your receiver. (such as UBEC or Rx battery pack)
If you hear the music tone repeat for more than 3 times, you may need to check your power source to the receiver.

PRODUCT ID: HK-SS200ALV

This product available from a warehouse near you!

145g

10+

$31.08

Further discounts available for registered & logged-in customers.

Customer rated

1 crown

Total of 2 discussions.

Vionnet

12 points - 5/16/2012

that's good quality for an big brushlesh jet pack?

Michael

6 points - 1/10/2012

No manual supplied ? How do you reprogram?

Kellyann

16240 points

Michael if you go to the international warehouse listing you will see under the FILES tab a manual for a simular ESC I hope this helps.

Customer Reviews

Overall Rating		michelvan 8 likes
Value
Quality

Like it?

2 comments. Reply..

Overall Rating		sn0wchyld 21 likes
Value
Quality

Like it?

Don't buy them now. The manuel gives the possibility for 6 options to program including number of cells and timing. The software only give beeps till from 1- 4. So it's impossible to program. Mine esc stops instantly at 50A on 6 cells and 76A on 5 cells. I concur. Absolute crap, and utterly useless to me. I bought after a mate showed how well they work (old ver), but mine on the exact same setup is hopeless. Sink loss, startup problems, overheating the motor... the list goes on. what were you thinking HK?!? Dont buy. period.

No comments. Reply..

.....click here to see all reviews