An excellent motor for planes up to 220 grams (8 oz) using 2 li-poly cells. Very lightweight at 19 grams including, with an integrated prop saver for APC 8x3.8 SloFly or APC 8x4 E propeller and firewall mount inbuilt. Great for small 3D planes weighing around 6 oz, or aerobatic planes up to 8 oz. Use with a 10 Amp brushlessESC and small 7.4V lithium batteries in the 400mah - 800mah range. The motor features a 3mm hardened steel shaft, dual ball bearings, integrated prop saver.
Spec. Model: A2204-14 Cells: 2-3 Kv: 1450rpm/V Maxx Eff: 74% No load Curr. .3A Max Current: 7.5A Weight: 19g Int. Resistance: 550mh Dimensions: 27.6 x 11.5mm Recomended Model: (3D 220g or less) Recomended prop: 8040/2S or 7035/3S
This is similar to the AXi 2203/52 or 2204/54 Use a 10A ESC with this motor.
Awesome little motor!!! Running it on a 24" tuff-wing with a 12A plush esc and a 1300mah 3s nano tech batt. Runs for over 15 min at WOT motor esc and batt are ice cold, very smooth. The screws for prop saver have no "head" causing prop to come off in flight or at take off, so I used a little bit longer ones with heads. Also not using o rings but a #64 rubber band folded into 3 rings, works great. Would buy again and would recommend to anyone with a small wing or a park flyer.
Horrible product. Came in packaging which was crumpled. Came 7 days after order. Doesn't work. Only two bullet connectors come, not pre-installed. Think again HK
No comments. Reply..
Every bit as powerful and smooth as the AXI 2204-54s I have owned/flown. Currently have it on a Knuffel V2 at 130grams AUW, it hauls it around with authority. Hovers and pull outs no problems. Flying with 2S 500 mAh 25C Zippy compact lipos. Love these batteries, getting 10 to 11 minutes of mixed flying, hovering, rolling circles, waterfalls, knife edge, etc. And this is in 42 degree weather!
Extremely happy with this motor and will buy another soon.