Location: UNITED STATES
HobbyKing RC Model HomePage RC Radio Control Help and Support RC Hobby Forum Contact our RC Hobby Support Staff About HobbyKing
RC Model Planes RC Model Cars RC Model Helicopters RC MultiRotor and Quadcopters RC Boats RC Electronics
AIRPLANES AIRPLANE ACCESSORIES POWER SYSTEMS RADIO SYSTEMS
TELEMETRY & FPV
 
 
 
 
 
CARS CAR ACCESSORIES POWER SYSTEMS RADIOS
 
 
BOATS BOAT ACCESSORIES POWER SYSTEMS RADIOS
HELICOPTERS HELI ACCESSORIES POWER SYSTEMS RADIOS
 
 
 
MULTIROTORS ACCESSORIES POWER SYSTEMS RADIOS
ELECTRONICS ELEC. ACCESSORIES
EMAIL  PASS 
TOTAL $0.00 QTY 0
Planes & Parts
Helicopters & Parts
Multi-Rotors & Parts
Cars & Parts
Boats & Parts
Bikes & Parts
Scale R/C Tanks
FPV & Telemetry
Batteries & Accessories
Chargers & Accessories
Electric Motors
Speed Controllers
Robotics & DIY
Servos & Parts
Radios & Receivers
Gas/Glow Engines & parts
UBEC & Regulator
Power Systems
Hardware & accessories.
Tools
Clothing, Gift & Acc.
Sale/Liquidation

Language
Currency
USA warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
  Item found in the following categories;
> Planes & Parts > All Models
> Planes & Parts > EDF Jets

  RATED:

T-45 Goshawk R/C 64mm EDF Jet EPO Kit only (AUS Warehouse)

T-45 Goshawk R/C 64mm EDF Jet EPO Kit only (AUS Warehouse)
T-45 Goshawk R/C 64mm EDF Jet EPO Kit only (AUS Warehouse)


The T-45 Goshawk EDF jet comes as a kit only and requires a powerful 30A brushless 64mm EDF system and 3 servos.
This well detailed, quality EPO jet is only the kit without all the electronic parts, Please see another listing for Ready-To-Fly verion.

Specification:

Wingspan: 950mm
Length: 1000mm
Wing loading: 36g/dm2
Main wing area: 18sq/dm
Flying Weight: 620g
Channel: 4ch
Motor: B3830 Brushless Outrunner 4300kv (NOT INCLUDED)
ESC: 30A (NOT INCLUDED)
Servo: 3 x 9g (NOT INCLUDED)
EDF: 64mm (NOT INCLUDED)
Battery compartment size: 107 x 39 x 33mm
 
Required:
Your own Tx & Rx
B3830 Brushless Outrunner 4300kv
30A ESC 
3 x 9g servos
64mm 6-blade EDF
Battery 2200mah 11.1V 3S 20C

PRODUCT ID: T-45Kit

This product available from a warehouse near you!

2 1:IC/2:Elec 4 Channel 950mm (37.40in) 1000mm (39.37in) 620g (1.364lb)
2559g Back warehouse: 0 6 $57.20
Email Buddy Issue Price War
esc
  • Hobby King 30A ESC 3A UBEC

    Combo Price: $8.95   IN STOCK



motor
  • HK2627 EDF Outrunner 4300kv for 64mm

    Combo Price: $9.95   IN STOCK



battery
  • Turnigy 2200mAh 3S 25C Lipo Pack (AUS Warehouse)

    Combo Price: $13.64   BACKORDER

  • Turnigy 2200mAh 3S 40C Lipo Pack (AUS Warehouse)

    Combo Price: $18.10   BACKORDER

  • Turnigy 2200mAh 3S 20C Lipo Pack (AUS Warehouse)

    Combo Price: $11.95   BACKORDER



servo
  • HXT900 9g / 1.6kg / .12sec Micro Servo

    Combo Price: $2.65   IN STOCK



acc.
  • EDF64 with ADH300 Motor Assembled 252W(4300kv)

    Combo Price: $19.95   IN STOCK



Further discounts available for registered & logged-in customers.
 Customer rated 4 crowns   
 
Total of 4 discussions.
pluto  191 points - 4/28/2013
 
Is there a link for the manual anywhere on the net? I haven't been able to find one.
crowe04  7 points - 1/19/2013
 
Mine came with the canopy almost unusable (badly damaged at some stage by being exposed to excessive heat). If spares support were available it would certainly improve things.
 Straight Up 754 points
I think this is the SAPAC T-45. Try SAPAC America.
Ray  9 points - 12/31/2012
 
I have a 5 blade edf lying around, will this give enough thrust on a 4300kv motor? Can you hand launch this plane easy enough?

 KaosKane 1442 points
Assuming a 3cell 2200 of 35c or up Yes.. And u can hand launch it very easily
aussiebob  7 points - 8/5/2012
 
could you please supply the C of G for this plane.
 DeathWarmedUp 17 points
****
Customer Reviews
Overall Rating
knight4105
36 likes
Value
Quality
Like it?
The t-45 Goshawk a good kit only fault the rudder is to thin and will not sit in position with out some mods,I cut a new one out of 5mm depron not like the 2.3 mm supplied same with the elevators 5mm depron. I did all the mod from RC Groups retracts landing gear rudder mod a lander EDF 4000 KV. The weight is now 1300 gms from about 800 gms stock takes about 100 mtr to get of the ground fly so so glides well. Will do another 10 flights before i do a landing with the retracts.


No comments. Reply..

Overall Rating5/15/2013
SirBiggles
27 likes
Value
Quality
Like it?
Kit is overal of modest quality. Requires shims to get rudder to fit better. Carbon spar for whole wing. Glue in some toothpick bolts for the rear stabiliser. I glued the canopy then cut it off to create removable canopy instead of clumsy and small battery compartment. Elevator and Aileron linkages systems are perfectly fine without modding. Esc placement and access is great with vented cooling. Flying characteristics are fantastic. Very Stable. Glides in nicely for landings. Cornering is very direct. Needs lots of up elevator when flying inverted. Setup is 4S 2200, Turnigy 2815 EDF 3500Kv Motor. 64mm 6 Blade fan about 450 watts. Hand launches are actually very easy despite the planes large size.


No comments. Reply..

.....click here to see all reviews
 
Aff. Link

Copyright 2012 Hextronik Limited.
The HobbyKing.com®, OrangeRx, Turnigy, Durafly, nano-tech and other brand logos and names are trademarks of hexTronik Limited.
All rights reserved