Turnigy Park450 Brushless Outrunner 890kv (AUS Warehouse)

Planes & Parts

Helicopters & Parts

Multi-Rotors & Parts

Cars & Parts

Boats & Parts

Bikes & Parts

Scale R/C Tanks

FPV & Telemetry

Batteries & Accessories

Chargers & Accessories

Electric Motors

Speed Controllers

Robotics & DIY

Servos & Parts

Radios & Receivers

Gas/Glow Engines & parts

UBEC & Regulator

Power Systems

Hardware & accessories.

Tools

Clothing, Gift & Acc.

Sale/Liquidation


Language
Currency

	USA warehouse now open. Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!

Item found in the following categories;
> Electric Motors > TURNIGY
> Electric Motors > TURNIGY EasyMatch
> Electric Motors > Outrunners by size > Parkfly

RATED:


	Turnigy Park450 Brushless Outrunner 890kv (AUS Warehouse)

Turnigy Park450 Brushless Outrunner 890kv (AUS Warehouse)

Designed to provide reliable and clean power for 3D parkflyers. This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a 250 watts brushless outrunner.

Spec.
Battery: 2~3 Cell /7.4~11.1V

RPM: 890kv

Max current: 14A

No load current: 8V/0.7A

Current capacity: 18A/15sec

Internal resistance: 0.20 ohm
Weight: 67g (not including connectors)
Diameter of shaft: 4mm
Dimensions: 51x28mm

Required;

20A ESC
2S~3S Li-Po / 6 ~ 10-cell Ni-MH/Ni-Cd
9x6 ~ 11x3.8 prop
Suitable for sport and scale airplanes weighing 15 to 30 ounces (425g–850g).

PRODUCT ID: Park450-890

This product available from a warehouse near you!

Kv (rpm/v)	890
Weight (g)	67
Max Current (A)	14
Resistance (mh)	0
Max Voltage (V)	11
Power(W)	150
Shaft A (mm)	4
Length B (mm)	38
Diameter C (mm)	28
Can Length D (mm)	19
Total Length E (mm)	51

Update/Add my own data
Customer Data

119g

10+

$15.54

Further discounts available for registered & logged-in customers.

Customer rated

4 crowns

Be the first to ask a question.

Customer Reviews

Overall Rating		brendan1 67 likes
Value
Quality

Like it?

Put one of these up front of a 900 gram easy glider, with an 11x6 folding. Drawing 14 amp at max throttle, giving a nice gentle climb, maybe 30 degrees. Happy enough, balances plane perfectly, long run time, great cool efficient motor.

No comments. Reply..

Overall Rating		William 5 likes
Value
Quality

Like it?

Motor draws 14.5 amps on 3s WOT 11X6 folding prop. Using Hobbyking 20 amp $9 ESC. Motor and ESC only get slightly warm. Draws slightly more current (15.5) amps on 10X8 folder prop. This is a 150 watt motor Power(watts) = Volts X current not 250 watts as mentioned in the write up. Decent shaft size 4mm and the shaft is protruding from the correct end saving you having to push out the shaft as with some other motors.

1 comment. Reply..

Overall Rating		Chris 38 likes
Value
Quality

Like it?

These are great little motors. They look almost identical to the E-Flyte 450 motors but cost less than 1/2 as much. Unfortunately you can't reverse the shaft to this motor is front of firewall mounted only. It happily turns a 9x6 and gives about 200w without getting warm, I found that anything above this stresses the motor too much.

1 comment. Reply..

Overall Rating		1/24/2013 Michael 19 likes
Value
Quality

Like it?

Great motors, i used 4 on my quad and all work perfectly. I did not put connectors on the motors, i just soldered the wires to the esc. I am using 10x4 SF props and 30amp esc's.

No comments. Reply..

.....click here to see all reviews

Aff. Link