USA warehouse now open. Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
This is one big foam Warbird! Being Plug N Fly it is a fast build model packed with enough features and scale detail to make this one bird you will be proud to own.
Made from EPO foam, this model is practical despite it's size, a one peice removable wing makes for easy transport, even the tail can be un-screwed if desired. The pre-fitted servo's and electric retracts are all pre-labelled making field assembly fast and simple. It uses the kind of 4s packs that are becoming very common now on large foamie's, chances are, you already have a few in your flightbox. The Pre-Fitted motor has plenty of power for those scale Warbird aerobatics or just straffing your flying field!
Scale detail is just superb, as are the pre-applied decals, features include pre-installed electric retracts/tailwheel, there is the very scale 4 bladed prop & spinner, navigation lights, adjustable radiator outlet, drop tanks, moulded exhaust stubs and guns. The flaps keep the landing speed right down, this model has no nasty Warbird tip stall tendencies, it just floats in like a trainer. If you have ever fancied owning a Warbird but were put off by all the stories you have heard about them being "difficult" to fly, this is the model for you!
Specs: Wingspan: 1600mm Length: 1400mm Flying Weight: 2800g Motor: 45-58 Brushless ESC: 80A w/BEC Prop: 16x6 Four Blade Servo: 9g x 4, 17g x 2 Retracts: Electric Servoless Type 6 Channel (thottle, aileron, elevator, rudder, retract, flaps)
Includes: All Hardware Instruction Book Glue
Requires: Your Own 6 Channel TX/RX 3200mAh ~ 4000mAh 4s Lipoly Battery
Just brought the Gunfighter Mustang, very pleased with it but not to sure about the C of G the manauel tells you to put the C of G 110mm from front of the wing recess ( the front of the wing sticks out by the fuselage) not the leading edge .Is this right it seems to far forward to me To have the C oF G 110mm I will have to put 8 oz of lead up front
Hi scott i bought this plane from the UK warehouse when I asked for help because some parts don't work ie tail wheel and one retract I'm asked to do a video and send it to Hong Kong in the UK there are laws to protect consumers. all I would like is to replace the faulty parts and fly my plane if this is not possible can I have a refund please ?
Sorry to hear about this, If it has faults and you don't want to go through the CS Proceedures, please contact CS about returning it to the UK Warehouse.
I am interested in the P51 Gunfighter 1600 but I have found 3 different prices == £*108.47 £*142.04 £*148.47 Could confirm what is the price for the P51 Gunfighter 1600 and is avaliable from the UK wharehouse and if so are they in stock
Hi Martin, go for 5000mA or higher as you will need weight up front to balance this model. Experiment with weight in the nose to determine what battery to get. The full load current of this model is 60A, the additional advantage of a bigger battery means it will not be working so hard (approx.10c)and you get a longer flight! Steve
Customer Reviews
Overall Rating
g00seman
66 likes
Value
Quality
Like it?
I bought this with a open mind, as this seemed rather cheap for a model of this size and what you got.
I was very surprised to be honest this model was exactly as described and is everything expected.
The plane was easy to put together, the CG was bang on using a 4500Mah 4s1p pack.I don't trust models with becs at this size so I disabled the bec and use a NIZH pack to run the radio.
This also helps with a bit extra weight up front for the CG.
All parts fitted together perfectly and this model has a big presence in the air.
Aerobatics are easy with this model as it has lots of power and scale flying is a breeze.
It has no slow flight nasty tendancies and to be honest flaps are not needed to either slow it down or stop it dropping a wing.
If it is flown too slow it will drop a wing but anyone flying that slow should not be flying it in the first place.
The retracts work flawlessly on grass and it takes off in 15 foot in a slight breeze.
The concern was are the wheels forward enough to handle grass without tipping over? this was not a issue as the wheels are big enough to grass.
I would highly recommend this model to anyone looking for a good size warbird that is a doddle to put together and with a decent amount of low wing flying easy to fly.
The sound of the 4 bladed prop sounds just right and it has more than enough power for scale flying and doing huge loops and basic aerobati
Copyright 2012 Hextronik Limited.
The HobbyKing.com®, OrangeRx, Turnigy, Durafly, nano-tech and other brand logos and names are trademarks of hexTronik Limited.
All rights reserved
