More than just a fancy name. TURNIGY nano-tech lithium polymer batteries are built with an LiCo nano-technology substrate complex greatly improving power transfer making the oxidation/reduction reaction more efficient, this helps electrons pass more freely from anode to cathode with less internal impedance. In short; less voltage sag and a higher discharge rate than a similar density lithium polymer (non nano-tech) battery. For those that love graphs, it means a straighter, longer curve. For pilots it spells stronger throttle punches and unreal straight-up performance. Excellent news for 3D pilots!
Unfortunately with other big brands; numbers, ratings and graphs can be fudged. Rest assured, TURNIGY nano-techs are the real deal, delivering unparalleled performance!
* The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. 1) The nanometer conductive additives form ultrastrong electron-conducting networks in the electrodes which can increase electronic conductivity. 2) These additives create a superstrong ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly. Advantages over traditional Lipo batteries; -Power density reaches 7.5 kw/kg. -Less Voltage sag during high rate discharge, giving more power under load. -Internal impedance can reach as low as 1.2mΩ compared to that of 3mΩ of a standard Lipoly. -Greater thermal control, pack usually doesnt exceed 60degC -Thickness swelling during heavy load doesnt exceed 5%, compared to 15% of a normal Lipoly during heavy load. -Higher capacity during heavy discharge. More than 90% at 100% C rate. -Fast charge capable, up to 15C on some batteries. -Longer Cycle Life, almost double that of standard lipoly technology.
I charge my Nano-tech packs at 4S and if I am in a hurry I will charge no more than 6S. At these higher rates I will never leave them alone to charge. I cannot see any documentation where HK spells out the charge rates, I have seen forum posts where some people charge at 10S. My rule of thumb is if they heat up while charging back off the power.
Came well balance. Definitely out performed my turnigy equiv. And on charging from 10pcnt upwards accepted 1090mah. can't get much better. Bring More to the Aussie warehouse we don't just need 3S batteries.
No comments. Reply..
ive bought many turnigy lipos but lately im getting alot of duds with poor soldering on the output and balance leads , so they are no good , should it be like this with quality controls im not to sure , a basic check doesnt take much and if it had of been done here i wouldnt be feeling like someone owes me $10 , so far on average if i buy 6 lipos 2 are usually dodgy and need fixing cells are ok and balanced just the cheap labour is acting like cheap labour with a i dont give a hoot attitude , maybe i allways recieve lipos made on a friday i dunno , but im getting peeved hard in the groinage area with all the duds lately