USA warehouse now open. Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
If you mean wind powered generator, you will need a lot of wind and could only power a very small load. Scaling down the prop doesn't scale down the air density. I recommend using a 15" slow fly prop to turn a low rpm motor for a wind turbine.
Hi, can I use this prop with H-King Micro JU-87G-1 Stuka 685mm EPO (PNF)- will it fit scalewise and what are the better options? As the original replacement 3-bladed prop does not have any specs (neither diameter nor pitch) - the smart answer is always appreciated.
If the corsair is a hand launch, I would avoid this prop as it is pretty feeble strength wise. I use it on a plane with undercarriage and the most gentle knock will break them so I doubt they would survive a belly landing..
gramps
I know you need 8x6 3 blade prop, this is a bit 2big for it you can try it's damm cheep.
I'd buy on the same pack 7x6 3 blade that I found on Planes ARF -> replacement parts.
on the same section found T-28 Trojan & 1100mm Stuka 3blade props. there are no details on those props but they seem to be close size of the Hurricane.
remember that 9x6 2blades is equal to 8x6 3blades so you can always buy normal prop although it mess the scale
The HK Hurricane seems a copy of the Art Tech Hurricane like the F4U Corsair and Spitfire.The propeller seems to be the same on all 3 planes.HK sells the Corsair spare propellers product. id is 5J041
The Durafly Stuka three blade propellor works well on the Art-Tech/HobbyKing Hurricane. I use it on mine, and it is very durable, and only needs to be bushed up on the shaft to work.
as Wilga-2000 R/C Airplane w/ESC, Motor, Servo and Floats Plug-n-Fly uses a 3 blades 8x6 you can go to that prop PRODUCT ID: XYH3B8x6 3 Blade EP Propeller 8x6 / 204x178mm
yes it work but you need towerpro Brushless motor or other to make trust with EP Propeller 9x7.I am using in my Sport trainer weight is 765 g i am using Towerpro brushless motor it make speed with thrust
Well yes you can use this as a pusher. But not for a quad as there will be a change in the pitch when you reverse the flow and that will mean two different picth rates for the two rotor sets.
I see your problem. How did you find this, since it is in the wrong place. You have seen the 3 Blade EP Propeller 12x8 / 305x204mm (PRODUCT ID: XYH3B12x8). It could be trimmed maybe??? Also 4 Blade EP Propeller 10x8.25/254x209.6mm. I have reported this item to Hobby King so it can be placed in the correct spot. THANKS
What about this one? HK F4U Corsair 1160x3 Replacement Propeller Set (PRODUCT ID: 5J041). I know it is only a 11 x 6 but it is close. You will find it under Planes ARF,RTF,KIT > Replacement Parts
Would be nice if they noticed they always were missing a lot of really basic info on many products and added it. I wonder how many lost sales due to this......
GWS sells a 3 blade spinner that fits perfect on this propeller.
Customer Reviews
Overall Rating
Ivano
likes
Value
UNRATED
Quality
UNRATED
7 thumbs up!
Wichtige zusätzliche Info: Prop hat einen Bohrungsdurchmesser von 3.175mm und einen 6-kant Mitnehmer mit 5.5mm. Ansonsten sauber gefertigt und verschickt.
No comments. Reply..
Overall Rating
Jason Pasierski
likes
Value
UNRATED
Quality
UNRATED
2 thumbs up!
I had bought these props in July of 2007 (Last year) for my P-40 warhawk which I also bought from here, but they no longer carry it.
At first I was really excited, new props, 3-blade, the perfect look. But all four that I bought were unbalanced and caused motor vibrations.
I actually happy they were unbalanced because as of today, I finally balanced the props with some scotch tape. This is important because I learned something new and that was how too balance a prop. It may not seem too difficult, but I was always eerie on how to do this etc. Today I learned and now have it installed on my P-40. No flight test was done but from holding the model and testing, the balance make that smooth slice through the air with no vibrations. Just the way I like it!
I'm going too give them a 4 because they were all unbalanced, but they deserve a 5 because too balance, you need a little bit of tape and 5 minutes of your time! I will gladly buy these again!
Great cheap prop, great for a quick scale look.. Needs HK to look into selling 3 blade spinners..
No comments. Reply..
Overall Rating
Fank Killgus
likes
Value
UNRATED
Quality
UNRATED
1 thumbs up!
first impression: cheap second view: the surface is different on one blade - will this work ? I tested it on a phase-3 P51. Weight ready to fly was 600 g with a 3Slipo. -what a blast ! handlaunch and nearly virtical climb is no problem ! I do not see a problem with balance - no vibrations. They withstand a couple of landings into deep grass. So that`s to say: great item !
No comments. Reply..
Overall Rating
Brad Mitchell
likes
Value
UNRATED
Quality
UNRATED
Like it?
Great prop for stuff like the GWS birds and such. Makes them look so much better then those silly orange props.
Liked em so much I even threw one on my foamy Ultimate, and four of them on a B-17 I built for a bud.
Compaired to the GWS blades they are way more forgiving, bending out of the way verses breaking, and are stiffer so performance goes up.
Copyright 2012 Hextronik Limited.
The HobbyKing.com®, OrangeRx, Turnigy, Durafly, nano-tech and other brand logos and names are trademarks of hexTronik Limited.
All rights reserved
