|
10/06/2010
efespilsen (63%)
hello,
which are the long compatible aluminium arms for the TGY-9150MG?
example:
***********a2pro.fr/produit_Photo/7860-01.jpg
Thank you
|
|
|
| |
|
mohsin
(72%)
Same issue here. I bought 5 and all 5 twitch as well. I'm using a 5 cell nimh pack.
Not very happy about the twitching. What gives?
|
|
|
|
Was this the best answer? YES | NO
|
|
 |
|
|
 |
|
|
2/04/2010
fastxturtle (62%)
I got 5 of these and all of them are showing glitches. The servos twitch maybe 1mm every few seconds. I have checked the receiver/radio and also same thing happens when i test it with servo tester. Any suggestions?
|
|
|
| |
|
SabTA
(62%)
try to install a 5A UBEC and feed the servo off of it
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
stefaan
(67%)
ver nice and strong servo nice price 1/3 cheaper than europe h reco..
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
TheGreatBoo
(66%)
I tried mine, no twitching here... I run them on 6V though. Are you using 4.8V or 6V acc? Will see if I have an old 4.8V acc to test with.
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
mohsin
(72%)
Same issue here. I bought 5 and all 5 twitch as well. I'm using a 5 cell nimh pack. Not very happy about the twitching. What gives?
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
mohsin
(72%)
UPDATE: I guess it must have been a fluke, the twitching as stopped and they have been working flawlessly!!!
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
|
17/02/2010
TheGreatBoo (66%)
I ordered 3 Power HD 9150 servos "#HD-9150MG/6334 Digital metal gear servo 60g/15.8kg/.17sec" but received 3 Turnigy servos! Thats not what I payed for! Are these rebranded Power HD servos or a copy of unknown quality
|
|
|
|
|
|
|
|
|
4/01/2010
Jude (39%)
Guys, im looking to buy servos for my 30% yak 54. I want all out 3d, meaning maximum control surface deflection. The more deflection used, the more acurate the servo has to be. I will be using 2 on the elevator, 2 on the ailerons, possible two on the rudder, or 1 bms champoin servo on the rudder. I want to know how these compare to the BMS Super strong digital 630 in acuracy. Im not too big on using a lot more torque than I need bcause i share my rx pack with the ignition system. So I want to know if the bms would be better for acuracy and effieciancy. Im thinking the bms have to run more efficiant with that heat sink vs the HD-9150MG puting out more torque and speed and not having a heat sink and can't beatbthe price in the BMW for under 22 usd. Also any one know if they use a corless motor?
|
|
|
| |
|
pc55bomber
(32%)
Hey Jude
Using these servo's for a while now in a 106cc Extra, full on 3D no problems. These are fantastic servo's. Check out Flying Giants forum for details. Cheers Paul
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
|
25/12/2009
ae4nr (48%)
I am using this servo on the rudder of my 27% Yak 54 50cc Have also the ds120 m on the elevator and ailerons will be switching to the 9150s as they come in stock The vibration of My Brillelli 60 cc has not affected the servo in any way.
|
|
|
|
|
|
|
|
|
23/11/2009
loopsy (63%)
You guys think it will work reliable as a Gas-servo ? I am concerned about the vibrations experienced on a DL50. Thanks.
|
|
|
|
|
|
|
|
|
20/10/2009
Travis (63%)
Do these come with servo mounting hardware and/or servo arms?
|
|
|
| |
|
TheGreatBoo
(66%)
Yes, rubber grommets, brass inserts, mounting screws and servo arms. At least mine did :)
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
|
4/08/2009
Doublsixes (100%)
Does anybody know if this servo can work directly on a 2s lipo pack without a regulator? I want to use 6 on my 30% Extra.
|
|
|
|
|
|
|
|
9/06/2009
jogurt (52%)
Bardzo dobre cyfrowe serwo, dobrze trzyma 0 dosyć precyzyjne , założone na kierunku w 4m Swifcie narazie się sprawdza
|
|
|
|
|
|
|
|
1/06/2009
Spotty Muldoon (46%)
Where can I buy a upper casing for this servo. Manufacture does not reply. thanks
|
|
|
| |
|
paul
(70%)
try troybuiltmodels**** they can probally get them
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
|
28/05/2009
ozione (79%)
Are these servos programmable? If so are they compatible to Hitec digital servo programmer HPP-21? Thanks
|
|
|
| |
|
rumpeden
(50%)
No. I have tried it :-(
|
|
|
This customer was awarded a credit for their answer.|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
4/04/2009
Tonefiesta (57%)
can someone please tell me the "F" measurement...
|
|
|
| |
|
inferno
(40%)
31.5mm
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
CHOCOFAN (51%)
IS THIS SERVO TRUSTED WITH 2.4Ghz.?
|
|
|
| |
|
knole
(77%)
Friend of mine tried this with the fasst system,worked perfectly:)
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
|
Brian (50%)
Can you program this servo?
|
|
|
|
|
|
|
|
killermmn (60%)
what type of arm need this servo?
hitec,jr,futaba??
|
|
|
| |
|
floodi
(64%)
Futaba
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
|
Richo! (50%)
Are after market alloy servo arms available for this servo?
|
|
|
| |
|
Richo!
(50%)
Ah, Futaba
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
|
Chester (75%)
what is the torque of these servo's in ounces?
|
|
|
| |
|
alex
(80%)
15.8kg/cm= 219.4oz/in
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
alex
(80%)
aka- a lot of torque :)
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
|
waynemia (74%)
do these have mounting hardware and arms?
|
|
|
| |
|
rumpeden
(50%)
Yes, but it is ment for std. servos. You need to buy alloy Futaba stuff for heavy loads as the servo is ment for.
|
|
|
This customer was awarded a credit for their answer.|
Was this the best answer? YES | NO
|
|
|
|
|
|
