HobbyKing Online R/C Hobby Store : ZIPPY Flightmax 2200mAh 2S1P 20C

View all comments | (20 threads)

Ask a question

16/07/2010
Long Ching (13%)
How about my order ? I had paid extra fee for UPS.

15/07/2010
Long Ching (13%)
Why my order always show "Processing" for five days? Stock of this product is 10 . What's happened? Please tell me why.

5/06/2010
parth95 (56%)
Will this work on the Team Associated RC18B with the stock body? Are there any mods to make it fit?

ricardocdd (56%)
they will fit a but just trim the frame a bit from the out side corner

2/05/2010
Justinas (50%)
How to I make this capable with my traxxas mini e-revo? What kind of converter do I have to buy?

Darby (55%)
Just get the traxxas plugs and soder them on thats it

VladiLOL (46%)
you have several options the best is to buy a traxxas battery conector, cut out the connector that the bat came cith and solder the traxas conector, or if you can`t then you do that there is the chance to put a XT60 conector on your REVO or you just simply buy a XT60 to traxxas convertor. I hope that info helps you :) I actualy use thos with a DEANS "T" conector with a "T" tp traxxas conversor because all my bats have a "T" type conector.

Brutis (71%)
Buy the same plugs that come on the mini erevo and soilder them on to the zippy lipo

reno911 (59%)
The only thing you would need to do is get a traxxas plug to solder, that and possibly cut your battery door a bit to let the wires have some room to play.

Troy (63%)
This battery fits just fine in the Mini Revo VXL. The only modification that you'll have to make is to cut the end of the battery door so that the wires have a place to exit. I'm completely satisfied with this battery.

mutlu444 (50%)
im using one traxxas female plug and ec3 paralel plug ( hand made ) its very good

aus-merv (60%)
Personally, i would just buy some Traxxas connectors and change them for the ones that come stock on these batteries. Easy enough to do even with a limited skill in soldering. Remember when cutting the ends off the battery cable, cut them INDIVDUALLY and not together. Bad stuff can happen if you cut them at the same time. Oh and check out youtube for step by step instructions on how to solder a traxxas connector. it's Childs play. Goodluck

AFerreira (91%)
just cut a piece of the battery door to pass the wires! that's it!

Christan (63%)
Here is a link ***********hobbycity****/hobbyking/store/uh_viewItem.asp?idProduct=10261

Khilra (75%)
The mini revo has TRX/traxxas connectors, these zippys have XT60 connectors (3mm gold plugs in casing)
Id recommend changing the revo to use these instead. I havent seen a converter that goes from XT60 to TRX. so you will probably have to solder one yourself. Therefor its easyer to change the connector on your esc instead *-)

28/01/2010
pejay (46%)
Is it normal that the battery swells a bit. I ran a test with this battery on a 35 size motor at 350 mA for only a few minutes and battery started to swell. The plastic film cover is inflated a bit. Temp on battery was only around 35 degree C (lukewarm)
Thankful for a reply

Jeff (67%)
its not normal for battery to swell

ProcessBlue (56%)
Stop using that battery immediately!

Gkp27 (63%)
It is not normal for the battery to swell up.
I pull 25 amps off these batteries they don't get warm or swell, sounds like a bad battery.

yoggi (60%)
no it is not normal :(

Shayne (100%)
some lipos's dont reach full capacity until they break in, too much too soon damages lipos

13/12/2009
pabloramos (45%)
Will it fit in a RC18r with aluminium chasis?
Thanks.

12/09/2009
Stefan (63%)
what kind of connector is there?
is it deat T ?

Montspy (55%)
This is XT60.

5/08/2009
garrett (88%)
Hey how long would it take to charger on of these at 2 anmps with the TGY-3 - Turnigy 2S 3S Balance Charger. Direct 110/240v Input? Thanks

Montspy (55%)
1.5 hour or less

Shayne (100%)
about 1hr 20mins

1/08/2009
riburgos (55%)
Will this work on the new traxxas 1/16 e-revo??? thanks for the help

aus-merv (60%)
Yea it will work/fit fine. You will just have to trim the battery door a little to fit the thicker cable that comes with this battery.

Christan (63%)
Here is a link ***********hobbycity****/hobbyking/store/uh_viewItem.asp?idProduct=10261

18/07/2009
GOLDSNIPER (93%)
Yes you can still balance the battery with the balance plug but it is not recomended to charge through the balance plug at more than 0.2 amps.

BTW This battery comes with deans connectors.

Canamflyer (66%)
The balance connector is rated by most chargers manufacturers for up to 4A. I would not go above 3A myself when charging these packs.

18/07/2009
Ori (63%)
Noob question: If I solder traxxas connectors, do I keep charging via the balance plug?

15/07/2009
ZABALA (63%)
i buy this bat i use this un mi rc car. MOTOR BRUSHED 540 THIS BAT INFLATE ALL USE BAD FOR ME THIS BAT

26/06/2009
GOLDSNIPER (93%)
Hobby City how come my lipos haven't been sent out? It's in stock and my payment has went through and my status has been showing paid for a while now.

21/06/2009
GOLDSNIPER (93%)
What discharge plug comes on these? I want to order them.

7/06/2009
melilelo11 (63%)
Bonjours! I shall want to know if I can use my charger ek2-0851 of esky with?

karolpenconek (77%)
Yes, but charging will be slow (aprox. 3h)

20/05/2009
T3rry (1%)
Please verify the length specifically, including everything in the wrapper (wires on the end if necessary) i want to use this for the new 1/16 e-revo and the battery box is only 101mm long.

jbono333 (79%)
The battery box dimensions for the e-revo vxl 1/16 are:

Height: 20.3mm
Width/Depth: 35.5mm
Length: 102mm

And yes these batteries will fit.

T3rry (1%)
i know what the battery box measurements are, i want to verify that the battery's measurements are accurate... ill have mine today anyways, they're out for delivery so i can verify the measurements myself.

jbono333 (79%)
i just fit these into my 1/16 e-revo. holla.

Gkp27 (63%)
the measurements on the web page are correct.
these batteries work fine in my 1/16 e-revo but you need to modify the battery doors so the wires
can fit out the battery door. the wires are thicker than the stock batt. wires so you need to cut a knoch out of th battery door to fit the wires out.

Ricky (61%)
has anyone used this in a stock traxxas slash? how much run time? or used it with a 540 motor?

karolpenconek (77%)
It's too small for 1:10 cars, mabye to 1:18.

Try use 7,4v 4000-5000mAh lipo

Pasan (78%)
It would work ok with a stock traxxas slash but you'll get pretty low run times, but I wouldn't recommend it for anything more than that. Better you aim for at least a 3000mAh 25C pack.

fabianvzwol (58%)
when will this item be back in stock?

DeadCow (46%)
Can anyone verify the size on this?

Ron (63%)
I have a cellpro 4s charger with a
Cellpro 4s Charger to Great Planes or Apogee Adapter(Part Number: CP-GP/AP). Would this adaptor work for cell balancing with the ZIPPY 2200mAh 2S1P 20C as well as the ZIPPY-H 3300mAh 3S1P 20-30C Lipoly pack or is there another adaptor required that you have to interface my Cellpro 4s to these batteries. Thanks
Ron

T3rry (1%)
Yes, please verify the length specifically, including everything in the wrapper (wires on the end if necessary) i want to use this for the new 1/16 e-revo and the battery box is only 101mm long.

T3rry (1%)
sorry i hit the wrong reply button

jbono333 (79%)
The battery box dimensions for the e-revo vxl 1/16 are:

Height: 20.3mm
Width/Depth: 35.5mm
Length: 102mm

And yes these batteries will fit.

AcadDude (54%)
Fits the Mini E-Revo and Mini Slash just right. No extra space to flop around and not to snug in and out. Perfect fit especially with the smaller gauge wire this batch. I really like the 14gage over the larger gage last batch I got for the Revo. These packs balance and charge well. Lots of punch and long run time. Thanks!

Click here to see all comments