|
6/4/2010
CORY LESTER (25%)
What type of connector comes on these ?
|
|
|
 |
|
|
 |
|
|
6/9/2009
nobrandname (34%)
I just got these batteries for my New Savage Flux but it won't do any wheelies or flippies? :-( Any help would be appreciated. Thanks
|
|
|
| |
|
Aron
(99%)
You need to run a 6s or 2 3s for that kind of power.
|
|
|
|
Was this the best answer? YES | NO
|
|
| |
|
nobrandname
(34%)
Thanks for the reply buddy. I was just under the impression that you can do flippies with a pair of 2s as I have seen on youtube. Maybe a 30c or 40c can do that.
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
|
5/7/2009
David L (75%)
lay a lil pad under the pack and trim a lil on the tray for the wires and they fit the T4. I am running them in mine, they are great!
|
|
|
|
|
|
|
|
|
Jindrich (50%)
What is real size of this pack?
Is it real so long?
I like to use in my RC10T4. I know someone writed in review it works, but how battery can fit into chassis?
Jindra
|
|
|
| |
|
Jagman
(50%)
I have two of these packs.
They are just under 18mm thick.
They average 44mm wide.
The actual cells are 164mm long. The balancingleads only add a couple of mm to this. The main power leads are 10AWG and quite stiff. They point straight out the end of the pack. If you have to bend them 90deg then th eoverall elngth is mre like 180 or even 185mm. The weight of 270g is correct. Hope this helps.
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
|
James (50%)
What style balancing taps come installed on these packs?
|
|
|
| |
|
Beaufighter
(25%)
JST-XH
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
|
|
seniorrc (50%)
I want to use a pair of these in a stock Erevo. I have a hyperion Duo. Is there anything else I need other than low voltage cutoffs and what lvc would you recommend?
Thanks Jim
|
|
|
| |
|
David L
(75%)
they are a lil long and require a lil extra pad for my E RERVO BL ED. They do fit and run great on my Monster Maxx system
|
|
|
|
Was this the best answer? YES | NO
|
|
|
|
|
|
.jpg){kind=small}
.jpg){kind=small}
