Micro EPP Xtra-300 2.4Ghz Airplane w/ 2.4Ghz Tx Plug-n-Fly Mini sized EPP Xtra-300 3D aerobatic plane with micro linear servos and motor with a special pop-off design propeller for saving the motor and propeller in the event of a crash.
We are unable to ship this product to the following countries: ALBANIA, ANDORRA, ARGENTINA, AUSTRIA, BELARUS, BELGIUM, BOSNIA HERCEGOVINA, BULGARIA, CROATIA, CZECH REPUBLIC, DENMARK, ESTONIA, FAROE ISLANDS, FINLAND, FRANCE, GERMANY, GREECE, HUNGARY, ICELAND, IRELAND, ITALY, JAPAN, LATVIA, LIECHTENSTEIN, LITHUANIA, LUXEMBOURG, Macedonia, MALTA, MOLDOVA, REPUBLIC OF, MONACO, NETHERLANDS, NETHERLANDS ANTILLES, NORWAY, POLAND, PORTUGAL, ROMANIA, RUSSIAN FEDERATION, SAN MARINO, SLOVAKIA, SLOVENIA, SOUTH AFRICA, SPAIN, SWAZILAND, SWEDEN, UKRAINE, UNITED KINGDOM, VATICAN CITY STATE (HOLY SEE), YUGOSLAVIA
Hi guys, can anyone help me out on this x300... i tried to fly this plane but for many attempt, plane keeps banking in left(thou the ailerons are leveled) and dive nose down after throwing it level 3/4 throttle. My friend told me to relocate the battery but seems there has no room for relocating the batt. I also bought the cessna arf but afraid i might nust crash it. Please help... the prop seems not parallel with the nose of plane, some what more space in between the nose and prop on the right side(viewing the plane from top).
i have one very very big question about this plain, WHY WHY WHY on earth can it not be ship to the gloruse united kingdom is there any way a speacil deal can be made or somthing i relly won't to get hold of this plain, and for £*30.80 it would be a crime not to buy it :( i am not too happy that i will now have to pay upwords of £*50 for it from a uk seller :( please some one find away.
R/CNewbie because he was able to do the work and find his answer. I was not just waiting to be spoon fed. Then he cam back and told us he no longer need help. It would of been nice if he told the world what he did but that does not matter. THAT IS WHY I WISH I COULD REWARD HIM Ok!!!
I can't help with the answer you want but I can save you some time by avoiding this aircraft all together. The motor doesn't last long at all and you'll pay too much to replace it. You would be better off choosing another plane that you can put a normal speed controller and servos in. I know it looks good... that's why I bought one too. The new Edge 540 micro would be better and looks better as well. Cheers
it can't be any of that i have brought a plain ade buy the same company (nine egale) it was a sky runner and the transmiter is a normal 2.4 and is leagle in the uk and i had to get a lipo for it that why it was so cheap from where i got it (toy shop called crocodile)(very nice famliy run place) it was cheap and leagle to ship the battey so it has to be becuase so prat sign some paper to ake money, if you relly won'tt to get it sent to you from this site get a friend or a specilist company to recive the package rebox the box and forward it to you i now i have just answer my self but still there are place that will only charge you the shipping cost and a small fee of 2-3 £*$ for the prilvage to do so( also the cost of the box and some other bits and bobs but 20£*$ and you should be flying in a few weeks)
Your best bet should be changing your esc for a brushless one, I´d go with a turnigy 5 Amp or 10 Amp to be on the safe side. If you upgrade your engine without changing your esc you can only fit a brushed one (which are quite less powerfull) and you cant fit an eng much more powerfull cause your esc will overheat and cut
this is the engine I´d go for: 1404N 2290Kv 9.2g 3.5A 160g Thrust Outrunner price 9.97$ in combination with this propeller GWS EP Propeller (DD-6030 152x76mm) (6pcs/set) price 3,39 $.
For the esc I would choose this TURNIGY Plush 6A /.8bec/6g Speed Controller price 7,58 $ that handles a brushless engine and it´s light, just 6gr.
All products available here at hobby king, at quite a good price.
With this combination you will have a rocket, much better than before, and you will have 6 spare propellers that may come handy.
Brushed engines are outdated, brushless is the way to go.
I will send you pictures when I mod mine, but the process is fairly easy. Ask me if you have doubts or comments.
Thanks a lot, i check that items, and looks great!
I just want to know how you connect the esc to the stock receiver?. because the stock engine it has a different plug...or you also will change the sotck receiver?
you welcome! In fact I´ m gonna change all the electronics. This will be my setup:
motor 1404N 2290Kv 9.2g 3.5A 160g with 6030 propeller
3 servo Hobby King 3.7g / .4kg / .10sec Micro
esc TURNIGY Plush 10amp 9gram Speed Controller that can be lightened aprox. 2 gr cutting wires and heatshrink.
With this setup the original mount for the engine doesn´ t work so a new one is needed. If you want to keep the stock one this engine will fit:BA BL1230 4200kv Brushless Inrunner Motor (or any 1230 size inrunner) it´ s less powerfull but it will fit straightforward. Hope this helps.
no sabia que tu tambien hablabas españ ol! Cuando me lleguen las piezas y modifique el avion te envio fotos. A mi los motores de serie no me duran nada, van bien 2 o 3 vuelos y luego decaen. 1 de 2 esta muerto ya. Pasandonos a brushless ganamos potencia y fiabilidad, aparte que son baratos de narices los motorcillos. Un saludo
Buenisimo, mucho mas facil ahora! Vengo llegando de un vuelo con el xtra y el motor murio!... asi que estoy obligado a relizarle un upgrade...
Creo que este motor tambien entra en el espacio o hay que hacerle alguna modifiació n? "18-11 2000kv Micro Brushless Outrunner (10g)"
Nose cual de estos dos pedir si ese o este "BA BL1230 4200kv Brushless Inrunner Motor"
Cual crees que le va mejor?
Si es outrunner el motor no cabe en el agujero del antiguo. Aunque comprando un soporte para el motor lo pegas en la pared del antiguo soporte y listo. Y los outrunner dan mas potencia pesando menos. El 18-11 2000kv da unos 130 grs de empuje y pesa 10grs y el otro (1230) da unos 55grs y pesa mas de 14 grs. Yo lo tengo claro, le compro un soporte por unos 2$ y le pongo el outrunner. Saludos
La verdad es que para no arriesgarme con el soporte me voy a pasar por una tienda con el motor en la mano y que me den un soporte que le valga seguro. Seguro que aqui en HK tienen alguno pero prefiero no arriesgar. Aqui hay un video en el que puedes ver como monta el motor que te gustaba 18-11 2000 kv y cambia toda le electronica. Va despacio porque no le ha cambiado la helice. Una gws 6030 haria que corriese mucho mucho mas.
Sí lo habia visto, se ve bastante interesante como queda la electró nica... me gustó .
El unico problema es que uso Futaba y el receptor es un poco grande y costoso.Le pondrí a una Orange que venden aquí .
I am actually using this battery without any modification, Rhino 360mAh 2S 7.4v 20C Lipoly Pack price 4,29 $ without doing any modification. Just plug and go. It lasts from 20 to 30 min depending on your throttle position. Higly recommended and cheap
Hiya, try this HK P-51D Mustang Canopy & Cowl Replacement Set. It will be too large but you can easily cut it down to size and its cheap and i dont think you'll melt this one :)
The dimensions of the mustang canopy are: LENGTH:202mm HEIGHT(HighestPoint):65mm WIDTH(front):70mm and WIDTH(rear):60mm. Price:US$4.25
ProductID:B5071 www.link Good luck :)
I wanna ask you about 2 things
why when i click add to cart you show me price 79,99$ ? and the other one thing i want ask you it is most important for me do you have parts like wings ? plis tell :) thanks for everything this is the best website :)
sorry for my English i'm from poland :)
Witam Wiesaw moim przyjacielem, niestety dla ciebie i mnie Hobby King nie jest tak dobry w hodowli wszystkich czesci, dla samolotw, ktre sprzedaja. Denerwuje wielu ludzi i mam nadzieje, ze czas wkrtce wiecej czesci. Cena koszyka moze byc inna od podanej ceny, jak dostac lepsza cene, gdy zalogowany. Sprawdz rwniez ikone przelicznik walut, aby upewnic sie zawsze na wlasciwej walucie, ktre lubisz. Goodbye i szczescie mj przyjaciel:) HK is not so good at stocking all the parts. Log-in price differs from standard. Check currency is correct :)
Be sure to glue your landing gear in place. I lost mine to the grass after a failed hand launch at 75% power. Critter needs full throtle hand launch. Also painted the foam spinned orange and CA's it to the prop. It came loose and I was lucky to find the black prop in the grass.
I fly it as a belly flopper and land on the grass. As for the prop, I replaced the stock one with a GWS 4530 and it flies so much better. Lots of power and no overheat issues so far. You can get a prop saver for 1.5 mm shaft.
yes, it is important information for me. I have some experiences with brushed motor toys (walkera mini helicopters etc.) and if it is plane with brushed motor, i think it is unusable.
And if it is brushless, is not underpowered ?
may be some flight video will be useful...
Motor is listed as N60 in the specifications... This is a very common brushed motor used in small heli as a tail motor. It's not very durable, but at least it's available anywhere for about $10. Hopefully it will be available here (as well as the Parkzone ultra micro motors) one day!
I used the 5g HK outrunner used all the original gear, block,servos,prop just used the HK brushless convertor and a 5 amp B/L esc fly's alot better slight increase in power makes it more positive .
3 thumbs up!
it is a very good plane, very good price , unbreakalbe ! is good to pull in your car and go every where and fly! ,but it can not hover ,but it needs more power ! I plan to upgrade to brushless but it will add weight! anyway it is a good good plane!
No comments. Reply..
2 thumbs up!
This one ist a must-buy! have one at home. It is a real plane, not just a toy. :-) Much more fun then the Kyosho minium and a lot faster. It is made from a kind of EPP and really strong. Innovative the prop: it just fall off on contact so no broke props anymore (or just lost -), but could be replaced with an 3X3 an propsaver). And you can use any 200 mAh or little more battery instead the expensive original. I love this little flyer.
7 comments. Reply..
1 thumbs up!
Easy to fly but not very precise, lots of play on the control surfaces. Faster than I expected, it's quite well streamlined. No good for 3D, not enough power to go vertical. Not much good at simple aerobatics either, was not able to hold a knife edge. Would be much better with more power. Looks awkward to change the motor since there's not much access to it but it may be possible.
No comments. Reply..
1 thumbs up!
This little fella looks good. Presentation was great out of the box and I think its going to work and fly very well. The problem is that I can't be sure yet because it was supplied with a dead battery so I haven't been able to test it or fly it. Replacement batteries were $10 then $8 now they are $18 each and I have 2 on back order for 4-1/2 weeks now. I wonder if I'm ever going to get to fly this plane. This is very dissapointing. Does anyone know how to restore an under-voltage battery???
4 comments. Reply..
Very cool plane, burned the brushed engine on the first flight.
Bought the Brushed to brushless converter, and a brushless engine, Today I gonna try it, and see how it goes.
Looks pretty good so far :)