Turnigy 2810 EDF Outrunner 4300kv for 55/64mm

Item found in the following categories;
> Electric Motors > All Outrunner Motors
> Electric Motors > TURNIGY
> Electric Motors > EDF Motors

RATED:


	Turnigy 2810 EDF Outrunner 4300kv for 55/64mm

Turnigy 2810 EDF Outrunner 4300kv for 55/64mm

Specs:

Kv- 4300

Dimensions: 46 x 28mm

Shaft: 2.3/3.0mm

Voltage: 11.1V

Weight: 59g

No-load current: 2.0A

No-load RPM: 48540

Load current: 29.0A

Load RPM: 36240

Thrust: 620g

Mounting Hole Bolt Circle: 18mm
Mtg. Hole Number & Size: 4 x M2.5

Includes 2 shafts, 2.3 and 3.0mm

PRODUCT ID: T28101A4300

Kv (rpm/v)	4300
Weight (g)	59
Max Current (A)	29
Resistance (mh)	0
Max Voltage (V)	11
Power(W)	0
Shaft A (mm)	-
Length B (mm)	46
Diameter C (mm)	28
Can Length D (mm)	12
Total Length E (mm)	60

Update/Add my own data
Customer Data

95g

10+

$13.45

Further discounts available for registered & logged-in customers.

Customer rated

517
crowns

Total of 10 discussions.

luis otavio

2 points - 2/18/2013

Oi, posso usar este motor em uma edf 64 7 blade, com esc 40/50A e lipo de 3s, 3200mah? Pretendo colocar no f14 HK. o que você*s acham do resultado? Obrigado.

Alfonso

1 points - 2/9/2013

great motor, great price :)

Yoshiki

4 points - 2/5/2013

Can you easily replace the shaft to 2.3mm?

ARINAS

91 points - 1/16/2013

is this motor ok to use with 10blade dps impeller/fan??

herropreeze

27 points - 10/27/2012

Can I use this as a replacement for the motor in my T45 Goshawk with stock fan?

snipeworm

37 points - 4/15/2012

What size gold connectors do I need?

Sambalolek

40 points

3.5mm - search for product id AM1001A

rocco capasso

21 points

Great motor, buy it. You need a 3.5 connectors

Julio Gadioli

137 points - 3/30/2012

Can I use a 40 amp esc with 2200mah 25c in a 64mm edf with this engine?

Sambalolek

40 points

Yes - the exact current draw will depend on the load of the fan unit so it's best if you measure it, but it should work. The max motor current is 29A, so a 40A esc and a (3S?) 2200mAh 25C is ok.

gsantos

267 points - 2/12/2012

what is the shaft diameter?

magnusEl

1238 points

The mounted shaft is 3mm, and there is a extra 2,3mm shaft included to.

BEST ANSWER CREDIT AWARDED

magnusEl

1238 points

Thanks for the credit, you got my

BBroe

74 points - 8/5/2011

When will there be a stock arrival?

Maurie

63 points - 7/20/2010

Does anybody if HC sell the 2.6mm bolts for these motors?

Customer Reviews

Create an account

Overall Rating		Gustav 28 likes
Value	UNRATED
Quality	UNRATED

1 thumbs up!

Great motor. I use with in a Robbe Gnat with a Rojet 410. I use a 3s 35c lipo and its flies great with a max amp of 35.

2 comments. Reply..

Overall Rating		stlin 10 likes
Value	UNRATED
Quality	UNRATED

1 thumbs up!

I bought this to replace the stock engine in my F-18 from starmax (64mm edf) It works great, a lot more power then before and sounds great!

No comments. Reply..

Overall Rating		polimof 65 likes
Value	UNRATED
Quality	UNRATED

1 thumbs up!

Bought this motor to match with EDF Ducted Fan Unit 7Blade 2.5inch 64mm. Should buy M2 mounting screws also.

3 comments. Reply..

Create an account

Overall Rating		15 likes
Value	UNRATED
Quality	UNRATED

Like it?

probado en mi f-4 con EDF Ducted Fan Unit 5Blade 2.5inch 64mm con rhino 2350 25c= 33A 390W y 590 gramos de empuje en estatico.probado tambien con gws edf 64 6 blade y con resultados casi iguales quiza algo menos de empuje con la de gws pero muy poco

1 comment. Reply..

Overall Rating		EDF Man 11 likes
Value	UNRATED
Quality	UNRATED

Like it?

Have flown it yet, but if it is as difficult to setup, or configure in the ESC, as it is to find mounting bolts, I'll pass on buying any more.

And it sure would be nice to have the number of poles (magnets) on every motor listed in the specifications, since every measuring device sold here, asks for it, in the setup! That would sure beat the heck out of disassembling and counting them.

By the way, anyone know the # here?

3 comments. Reply..

.....click here to see all reviews