USA warehouse now open. Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
More than just a fancy name. TURNIGY nano-tech lithium polymer batteries are built with an LiCo nano-technology substrate complex greatly improving power transfer making the oxidation/reduction reaction more efficient, this helps electrons pass more freely from anode to cathode with less internal impedance.In short; less voltage sag and a higher discharge rate than a similar density lithium polymer (non nano-tech) battery.For those that love graphs, it means a straighter, longer curve. For pilots it spells stronger throttle punches and unreal straight-up performance. Excellent news for 3D pilots! Unfortunately with other big brands; numbers, ratings and graphs can be fudged. Rest assured, TURNIGY nano-techs are the real deal, delivering unparalleled performance!Spec.Capacity: 3300mAhVoltage: 6S1P / 6 Cell / 22.2VDischarge: 25C Constant / 50C BurstWeight: 489g (including wire, plug & case)Dimensions: 145x53x37mmBalance Plug: JST-XHDischarge Plug: 4mm bullet-connectorSuited to the following models: 6S: LOGO500, GAUI EP425/550/X56S x 2: MIKADO LOGO500SE/600/600SE, ALIGN T-REX600, HENSELEIT TDR, Compass Atom 6HV, Outrage Fusion 50 * The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. 1) The nanometer conductive additives form ultrastrong electron-conducting networks in the electrodes which can increase electronic conductivity. 2) These additives create a superstrong ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.Advantages over traditional Lipo batteries;-Power density reaches 7.5 kw/kg.-Less Voltage sag during high rate discharge, giving more power under load.-Internal impedance can reach as low as 1.2mΩ compared to that of 3mΩ of a standard Lipoly.-Greater thermal control, pack usually doesnt exceed 60degC-Thickness swelling during heavy load doesnt exceed 5%, compared to 15% of a normal Lipoly during heavy load.-Higher capacity during heavy discharge. More than 90% at 100% C rate.-Fast charge capable, up to 15C on some batteries.-Longer Cycle Life, almost double that of standard lipoly technology.
PRODUCT ID: N3300.6S.25
The dimensions are correct give or take a few 10k of an inch end to end depending on how tight the wrapping is, I have two of these batteries, one for each motor in a Honda HA420 dual pusher prop I fly.
Has anyone tried these on a HK500GT? I´*m wondering if I should buy these or the 4000mah ones. I only hover and I want the best flying time possible. Any andvices will be appreciated!
if you are only hovering you could definitely get away with 4000mah for awesome flight time(a little heavier). I personally have the 3300mah(6s) They are super powerful for 3D and still give me around 5 minutes of flight time. These are a safe battery as they are very light considering how many mah, but still give you a good flight time.
stock will be inbound shortly , due to the world wide demand of these amazing packs , supply has been short , but HK , will continue to supply these packs at the lowest price for you .
Tried it for 4 flights while internal resistance is not this low at 2.5mOhms they have more power than other turnigy 30C with lower internal resistance.
I prefer them over equivalent Turnigy.
lighter
more punch
charge faster
swelling resistance remain to be seen but i am confident that they will be better than Turnigy
Customer Reviews
Overall Rating
belcom
14 likes
Value
UNRATED
Quality
UNRATED
1 thumbs up!
I used these packs in Trex 500 with Scorpion 1600kv, 13T pinion and Castle Phoenix 80 ESC. I fly for 7 minutes (no 3D) at about 75pcnt - 80pcnt throttle 2400-2500rpm and putting back about 2000-2100mah. I hovered a couple times for about 9.5 minutes but that's a little too much. The headspeed is constant and doesn't drop. They don't have as much punch as a 40C battery obviously but work great and charging is fast.
No comments. Reply..
Overall Rating
Rodrigo
989 likes
Value
UNRATED
Quality
UNRATED
Like it?
I just received this battery. Arrived balanced all cells 3.89v. My power source would only let me charge at 5 amps which was no problem....
No comments. Reply..
Overall Rating
Customer
13 likes
Value
UNRATED
Quality
UNRATED
Like it?
tested in a compas 6hv fit perfet 6 mints 3d and used less than 80pcnt realy good mach for this heli no complains here!!!!!!!!!!!!!!!!!!!!!
Using Two of these in series in my 12cell Trex600ESP conversion... They are the "Bomb".... They are lighter and smaller than my zippy300040C units...!!!
Pulling 5500watts 77amps - during punchouts - Headspeed 2200 - ESC - Castle Ice80HV - CG is perfect - Heli flys for 10 mins - Packs only warm to the touch - Does it get any better than this......WOW
Copyright 2012 Hextronik Limited.
The HobbyKing.com®, OrangeRx, Turnigy, Durafly, nano-tech and other brand logos and names are trademarks of hexTronik Limited.
All rights reserved
.jpg)
.jpg){kind=small}
