Turnigy nano-tech 350mah 1S 65~130C Lipo Pack

Planes & Parts

Helicopters & Parts

Multi-Rotors & Parts

Cars & Parts

Boats & Parts

Bikes & Parts

Scale R/C Tanks

FPV & Telemetry

Batteries & Accessories

Chargers & Accessories

Electric Motors

Speed Controllers

Robotics & DIY

Servos & Parts

Radios & Receivers

Gas/Glow Engines & parts

UBEC & Regulator

Power Systems

Hardware & accessories.

Tools

Clothing, Gift & Acc.

Sale/Liquidation


Language
Currency

	USA warehouse now open. Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!

Item found in the following categories;
> Batteries & Accessories > Li-Poly (All brands)
> Batteries & Accessories > Turnigy nano-tech
> Batteries & Accessories > 50~65C Discharge

RATED:


	Turnigy nano-tech 350mah 1S 65~130C Lipo Pack

Turnigy nano-tech 350mah 1S 65~130C Lipo Pack

More than just a fancy name. TURNIGY nano-tech lithium polymer batteries are built with an LiCo nano-technology substrate complex greatly improving power transfer making the oxidation/reduction reaction more efficient, this helps electrons pass more freely from anode to cathode with less internal impedance.
In short; less voltage sag and a higher discharge rate than a similar density lithium polymer (non nano-tech) battery.
For those that love graphs, it means a straighter, longer curve. For pilots it spells stronger throttle punches and unreal straight-up performance.
Excellent news for 3D pilots!

Unfortunately with other big brands; numbers, ratings and graphs can be fudged. Rest assured, TURNIGY nano-techs are the real deal, delivering unparalleled performance!

Spec.
Capacity: 350mAh
Voltage: 1S1P / 1 Cell / 3.7V
Discharge: 65C Constant / 130C Burst
Weight: 15g (including wire, plug & case)
Dimensions: 52 x 30 x 5 mm
Balance Plug: JST-XH
Discharge Plug: JST
*
The nano-core technology in lithium ion batteries is the application of nanometer conductive additives.
1) The nanometer conductive additives form ultrastrong electron-conducting networks in the electrodes which can increase electronic conductivity.
2) These additives create a superstrong ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion.
Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.
Advantages over traditional Lipo batteries;
-Power density reaches 7.5 kw/kg.
-Less Voltage sag during high rate discharge, giving more power under load.
-Internal impedance can reach as low as 1.2mΩ compared to that of 3mΩ of a standard Lipoly.
-Greater thermal control, pack usually doesnt exceed 60degC
-Thickness swelling during heavy load doesnt exceed 5%, compared to 15% of a normal Lipoly during heavy load.
-Higher capacity during heavy discharge. More than 90% at 100% C rate.
-Fast charge capable, up to 15C on some batteries.
-Longer Cycle Life, almost double that of standard lipoly technology.

PRODUCT ID: N350.1S.65

This product available from a warehouse near you!

Capacity(mAh)	350
Config(s)	1
Discharge(c)	65
Weight(g)	15
Max Charge Rate (C)	8
Length-A(mm)	52
Height-B(mm)	30
Width-C(mm)	5

Update/Add my own data
Customer Data

35g

10+

$4.41

Further discounts available for registered & logged-in customers.

Customer rated

5 crowns

Total of 4 discussions.

Gael

31 points - 12/24/2012

According to specs, the Ladybird battery is 32x20x7mm. This one is 52x30x5mm so it will not fit the Ladybird battery case without modification, because of the width.

Liam

1 points - 12/6/2012

Will this fit inside the Walkera ladybird and miniCP, CP kills average batteries in no time.

Gael

31 points

Forgot to tell: plus you'll need an adaptator between JST plug and Walkera two pin plug.

Marcos_

123 points

fits on minicp, but lasts less than 3 mins. I am looking for a bigger lipo for MiniCP.

Marcos_

123 points

oops sorry, wrong lipo.

Marcos_

123 points

does not fit MiniCP. MiniCP battery holder has: Height-B=22mm(and Width-C=7mm).

Mike

18 points - 10/21/2011

Please, what is the actual weight of this cell? 35g or 15g? Answer is critical! Thank you

Magicmole

21 points

15g, 35g is the shipping weight with a box and things :)

BEST ANSWER CREDIT AWARDED

Mike

18 points

Thank you!

ShaunSpeed

29 points - 10/17/2011

Would this work in a Mcpx with an adaptor? Would the C rating be safe for the board?

Islero

18 points

Interesting idea. Would have lots more punch than the 300 mah nano-tech, but it is almost twice the weight. Also, the battery holder and connector would need modification. I use the 300mah ones on my mCPx and really like them. Buy the battery charging cable and get the cheaper combo deal for them.

Customer Reviews

Create an account

Overall Rating		sour41 126 likes
Value
Quality

Like it?

servo amplifier to buy

No comments. Reply..

Overall Rating		Levi- 14 likes
Value
Quality

Like it?

Hi, Akkus sind top, angaben stimmen, nur komm ich nicht drauf welchen sinn diese akkus haben, 3g mehr und du hast 750mah 35-70c was im endeffekt ja mehr leistung ist ( umgerechnet auf 350). Sie sind weder leichter oder kleiner als 750mah.. Das einzige was man davon hat ist halbe flugzeit,... Und etwas weniger druck. Getestet am v120d02s. Kann mir jemand ein sinnvolles einsatzgebiet vorschlagen ? Gruß

No comments. Reply..

Create an account

Overall Rating		3/15/2013 6 likes
Value
Quality

Like it?

perfect for getting working lights with an extra battery.

No comments. Reply..

.....click here to see all reviews

Aff. Link