Turnigy nano-tech 3300mah 6S 65~130C Lipo Pack

Total of 3 discussions.

JasonR

4 points - 2/13/2012

Whats the AWG of the wire? Image looks like it could be 10?

Shuz199

40 points

From my experience buying nano-tech batteries, they usually use 10AWG with the 4mm bullets, and 12AWG with the xt-60 connectors. I haven't purchased this exact battery though, so I cant say with 100% certainty.

BEST ANSWER CREDIT AWARDED

Michael

1 points

The wire is 10AWG I bought six of them and am in the process of carefully breaking them in.

aaron

2 points - 12/26/2011

ism it good for cc monster mamba

bananabender

129 points

it would be nice power for speed runs with a cc mamba monster but watch the heat , i run my cc mamba mosnter erevo on 6s its fine but keep a good eye on ya temperatures > if allways on the happy trigger

hudson

1 points - 12/14/2011

hello : i want to know n3300.6s.65c li-po battery is it suitable trex 600E pro ? please feed me back please. thanks.

regards

hudson

levpardede

109 points

it is fit nicely on 600 e pro and that bird going to love it. but from my experience before turnigy nano tech are easy to puff, don't know if they have the same issue, just make sure to use 5,5mm bullet in series to minimal battery resistat and ripple voltage. hope this help

chouchkacemi

91 points

I put HXT 6mm on those in series with my 600 efl pro, perfect!

IOANNIS

2 points

I bought six of those batteries, one of them had one cell damage after the first flight.

Michael

1 points

Do you break new lipos in by charging at 1C and using only half throttle for the first 5 flights?

Customer Reviews

Overall Rating		Helitsfun 7 likes
Value
Quality

Like it?

Bought two of these batteries to try in my Align 600e pro. After first flight all cells were at same level, and battery wasn't even warm. Great value I Will be buying more.

2 comments. Reply..

Overall Rating		yogi83 12 likes
Value
Quality

Like it?

these are the best batterys ever i use them in my zonda 40" catarmaran rc boat with dual 2075kv motors and sordfish 200amp esc's the battery's are running temp's between 30 to 40 degree's perfect check it out on youtube if you like its under zonda 40" i also use them in my genesis rc boat runnig parrelel for 12s power and are pshyco crazy yumyum gime more

No comments. Reply..

Overall Rating		Richard 3 likes
Value
Quality

Like it?

Buyer be Aware !! The Nanotech line is a poor Quality and will not be supported by there support team if you have problems which you will .

1 comment. Reply..

Overall Rating		chrisrevv 1 likes
Value
Quality

Like it?

I have one of these that I use in my Pursuit Hull, I have an 1850kv leopard and a swordfish 200a ESC modified with larger caps. I put it under a fair bit of load with a pretty big octura prop and it does around 80km/h with this combo. Everything stays reasonably cool except for the cable and the battery, it got really hot last time I used it and it baloons a bit worse on every use. Have probably had around 20 fast runs wuth it but will probably dispose of before it sets my boat on fire..

No comments. Reply..

Overall Rating		chrisrevv 1 likes
Value
Quality

Like it?

Ive uploaded a couple of pics of my boat flying in the local lake with one of these batterys installed..

No comments. Reply..

.....click here to see all reviews