Alloy Clevis for Non Threaded 2mm Control Rod

Item found in the following categories;
> Hardware & accessories. > Horn/Hinge/Clevis

RATED:


	Alloy Clevis for Non Threaded 2mm Control Rod

Alloy Clevis for Non Threaded 2mm Control Rod

PRODUCT ID: ALU-CLEV2MM

This product available from a warehouse near you!

10+

$0.64

Further discounts available for registered & logged-in customers.

Customer rated

516
crowns

Total of 5 discussions.

Alan

4 points - 6/13/2013

I drilled the hole out to about 2.4mm with no problems. Now the hole is big enough to handle the fat carbon rod I already have in hand. Awesome little clevis.

Fabi

8 points - 6/12/2013

Hey, can anyone tell me wich length this thing has?

FabianSFZ

51 points

Look at the artikles name and Diskription *) hopr I helped you

handyjap

223 points

Length 26.4mm* Length of Gap 12.2mm* Thin long screw M2x10, Grub screws M3x3* Diameter 5.7mm* Hole size 2.1mm

handyjap

223 points

Length 26.4mm , Length of Gap 12.2mm and 2.8mm wide , Thin long screw M2x10 , Grub screws M3x3 , Diameter 5.7mm , Rod Hole size 2.1mm and through

Dongskie

234 points - 3/25/2012

@Hobby King: Please produce a smaller version for 1mm rod and narrower clevis mounting point. target=_blank>Alum. Link

ask21

27 points

YES, I agree. We need a smaller version!

waterlogged

2846 points

Why not just solder the larger metal clevis straight to the control rod. Just make sure the solder fills the join and it would never come apart unless you resolder it. (or it's in a fire):-) Use a pair of pliers to hold the control rod, this will dissipate the heat so that anything further back won't melt.