Aluminum Rear Shock Tower - A2003T

 Measuredpath 23 points

It will fit the nitro as they share a lot of parts. In fact any Kyosho inferno or inferno 09 should fit. Just double check to be 100%. The only down side to this part is you get zero hardware. I found out the hard way.

 Ezaculate 7 points

Thanx.. Come on HK, put it in turrnigy 1/16 nitro buggy spare part page, so we're not guessing for its compatibility..

 EODPete 181 points

you will need a nut and bolt to mount it

 joshuav 78 points

You can use the same screws, but you will need stop nuts on the other side. Unfortunately HK does not seem to provide the stop nuts, and so far I haven't managed to find them anywhere so for now my shock tower is just sitting in my parts bin.

 Measuredpath 23 points

Interesting, I am very disappointed by that and glad you told me it is not even available to purchase

 Janek1986 42 points

If you meen fixing on the shocks, i use the same bolts, but i use stop nuts on other side. Fixing the tower to the dif is the same as the plastic one. You use stock bolts.

 tramsgar 235 points

If stop bolts are required then stop bolts should be provided. Looking at you, HK =). But I'd rather have them threaded - it's an UPgrade.

 crashd 103 points

You actually need slightly (1/8th inchish) longer bolts to make up the difference for the nuts if you use the stock shock bushings. 3mm bolts/nuts fit fine. lhs anyone?