USA warehouse now open. Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
Finally, a nano-tech has arrived for your Solo-Pro 100 helicopter. Boost the performance of your machine with this 1S 300mAh 35-70C high power Lipo.
More than just a fancy name. TURNIGY nano-tech lithium polymer batteries are built with an LiCo nano-technology substrate complex greatly improving power transfer making the oxidation/reduction reaction more efficient, this helps electrons pass more freely from anode to cathode with less internal impedance. In short; less voltage sag and a higher discharge rate than a similar density lithium polymer (non nano-tech) battery. For those that love graphs, it means a straighter, longer curve. For pilots it spells stronger throttle punches and unreal straight-up performance. Excellent news for 3D pilots!
Unfortunately with other big brands; numbers, ratings and graphs can be fudged. Rest assured, TURNIGY nano-techs are the real deal, delivering unparalleled performance!
* The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. 1) The nanometer conductive additives form ultrastrong electron-conducting networks in the electrodes which can increase electronic conductivity. 2) These additives create a superstrong ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly. Advantages over traditional Lipo batteries; -Power density reaches 7.5 kw/kg. -Less Voltage sag during high rate discharge, giving more power under load. -Internal impedance can reach as low as 1.2mΩ compared to that of 3mΩ of a standard Lipoly. -Greater thermal control, pack usually doesnt exceed 60degC -Thickness swelling during heavy load doesnt exceed 5%, compared to 15% of a normal Lipoly during heavy load. -Higher capacity during heavy discharge. More than 90% at 100% C rate. -Fast charge capable, up to 15C on some batteries. -Longer Cycle Life, almost double that of standard lipoly technology.
You can switch the polarity by changing the two cables in the Molex connector.
You can use a needle to push the little metal fans at the Molex connector. Pull the cable gently while you push the metal fans down until the cable is removed from the plug. When you switch the red and the black cable be careful not to shorten the contacts. I used to remove one cable, bend it away from the plug. Now I remove the second cable and insert it directly where the first cable was. After that, the first cable is inserted in the free slot. You may here a little click when you stick the cables back into the plug.
No the V922 battery has a different plug. You can search for another nano-tech 300mah battery on this website which is available with the required plug. I think it is the E-Flite ultra micro plug.
Hello
Im looking for a better battery for the X4 Hubsan quad and had seen this as its a little higher mah Unless anyone can suggest any other that HK sell? Also my lipo charger only charges 2s lipos and with the large F type connector and multi charge connector (2s - 6s. So Id like to ask which charger do you use to charge these small batteries Olso it looks a different plug to the X4 isCan anyone point me to the correct plugs. (Molex I think)
I bought this battery for hubsan and arrive days ago, Bigger mah mean longer time flight time so dont worry about that. The only thing you must change is switch the lipo plug cable (positive to negative, and negative to positive. I still using USB hubsan, It work great.
if the connectors are the same then it will fit but you will need to check the polarity first because nine eagles does their polarity reversed compared to everyone else
hi,
yes, but its not very easy.
but the cable are safe at place on little black plaste-base with some "glue"
never use some knife or something can make a hole at the lipocase.
i have removed the cap at 10 of this, all ok.
but he best you can do - solder a connecter cable and have SAFE fun
Heat it up with your hand an now you get the cap -left -right -up -down very carefull and slow.
Hope you understand.
But why you not use the right connector and solder it ?
The cap weight only 0,2g max!
After about 30 charges/flight in a mini CP brushless the battery only last about 1-2minuts :( voltage drop like a stone if i idle up for 3D. charged at 1c and discarged at 1A to check and all my batteries is 180-230mah :( not usable. my original Walkera 350mah is still 320-350mah after 60-70charges/flights.
David31,
si tu lit le commentaire plusieur s indique bien d'inverser la polarité* des prises.
apres ce n'est pas possible que ton chargeur est cramé* a cause d'une batterie car normalement quand tu inverse la polarité* il beep et t'informe d'une inversion de polarité*.
je possede un accucel6 et il me l'indique car deja testé*.
peut etre ton chargeur a lacher tout simplement
Bonjour
la batterie ma dé*truit mon chargeur imax b6ac
vous avez pas indiquer en gros la polariter
bilant un chargeur hors service
Hello
my battery charger IMAX B6AC destroyed my
you to indicate roughly the polariter
bilant charger off
no and even if it was do not use the solopro battery as a replacement for any other brand helicopter because solo pro products have reversed polarity compared to other brands.
Hi Guys Ref - Nano-tec 300mah Battery. Does anyone out there know where to get the 2pin molex plug,s and socket,s fitted to these batteries and there charger,s. Thank,s for any help Roger
If I buy this battery and swap the polarity cables will work with Mini CP? The stock Mini CP charger will charge this battery? How long the stock charger will charge in minutes?
Thanks
nine eagles does have reversed polarity on their stuff(learned the hard way) so you could get this battery and swich the polarity to make it compatable with other helis. the stock minicp charger will charge it if the conectors are the same (i think they use the same connector) and this battery charges in about 30-60 minutes depending on charge rate
Hey Guys,
I'm looking to buy a few of these to use with my Walkera Mini CP, and from reading the posts here already it seems like all I have to do is swap the polarity. I was wondering if someone could send me a link to a parallel charging harness that would be compatible with these connectors. I'm unsure about whether the ones I find on this site will fit the style plug. There was a something about shaving down some JST connectors to get it to work, but a link to the charging harness itself would be nice.
Any info is much appreciated.
Thanks!
Hi,
First: my english are bad..
I have the mini cp, and i say the best you can do
Is to cut the damn walkera connectors and solder 2mm gold connectors, that give you a lot of power & flighttime, are you solder good, search for the LVC on the board and get it out, this lvc shut down the power and you use only 60pcnt of you lipo capacity. Minidean also good, but very bad to solder and you damage realy easy the lipo ,...
I hope you understand a little, have lot of fun dude
Greez
Change Polarity for Blade mCPX?
Hey guys, the Polarity of this nice LiPos have to be changed like Genius CP?
Dont want Magic Smoke *)
Regards
Hey Freunde muss die Polaritä*t von diesen Akkus umgekehrt werden um diese am Blade mCPX zu betreiben? Keine Lust das mir was abraucht...
Grü*ß*e
Yes, polarity must be changed. a good idea is to look at the power lead colors and make sure black always goes to black and red to red. If their not color coded a voltmeter is a very handy tool to have :)
Actually it is a bit loose. I stick a piece of felt onto the battery cage of LB to prevent the nano tech from sliding around. Don't forget to swap the pins before using or charging.
Hobby king allows you to enter your email for notification on any out of stock item called the stock arrival alert. They will sent you an email when it is back in stock.
i use those red JST female plugs, they actually fit well when you sand down the width of the plug on this battery a little bit. so basically i made a multi charging lead by using jst plugs, then i play wirings to make it able to use on a 2S/3S charger.
Fits perfectly in the mCP X original battary mount. No need to cut the plug. Only dremel away the white plastic at the side. Then the plug also fits in the original battery cable.
Flight time with brushless setup: HP05s@100pcnt throttle, 9T pinion, XP7A ESC, two 6mm tail motors running inverted to each other, Microheli Carbon main frame, fast flight blades.
3:48min! hot battery but still flat.
Two batteries in parallel: 7:25min
Enough power at a nice price.
1 comment. Reply..
Overall Rating
Robert
9 likes
Value
Quality
Like it?
Ich habe den Lipo im Genius CP con Walkera im Einstz. Funktioniert echt Spitze. Jetzt geht auch Rückenflug im Wohnzimmer, da die Drehzahl nur mehr geringfügig einbricht.
2 comments. Reply..
Overall Rating
Robert
9 likes
Value
Quality
Like it?
Ich habe den Lipo im Genius CP con Walkera im Einstz. Funktioniert echt Spitze. Jetzt geht auch Rückenflug im Wohnzimmer, da die Drehzahl nur mehr geringfügig einbricht.
5 comments. Reply..
Overall Rating
machara2000bb
5 likes
Value
Quality
Like it?
I bought 40.12 have around one defective article (dead). I want you to do quality control.And one of 12 want you to give another one free.
Copyright 2012 Hextronik Limited.
The HobbyKing.com®, OrangeRx, Turnigy, Durafly, nano-tech and other brand logos and names are trademarks of hexTronik Limited.
All rights reserved
.jpg)
