*High performance replacement for Traxxas TRA2820. Designed to fit 1/16 Traxxas models.
Add extreme power and performance to your Traxxas vehicle with this high discharge, high capacity TURNIGY nano-tech battery!
More than just a fancy name. TURNIGY nano-tech lithium polymer batteries are built with an LiCo nano-technology substrate complex greatly improving power transfer making the oxidation/reduction reaction more efficient, this helps electrons pass more freely from anode to cathode with less internal impedance. In short; less voltage sag and a higher discharge rate than a similar density lithium polymer (non nano-tech) battery. For those that love graphs, it means a straighter, longer curve. For pilots it spells stronger throttle punches and unreal straight-up performance. Excellent news for 3D pilots!
Unfortunately with other big brands; numbers, ratings and graphs can be fudged. Rest assured, TURNIGY nano-techs are the real deal, delivering unparalleled performance!
*The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. 1) The nanometer conductive additives form ultrastrong electron-conducting networks in the electrodes which can increase electronic conductivity. 2) These additives create a superstrong ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly. Advantages over traditional Lipo batteries; -Power density reaches 7.5 kw/kg. -Less Voltage sag during high rate discharge, giving more power under load. -Internal impedance can reach as low as 1.2mΩ compared to that of 3mΩ of a standard Lipoly. -Greater thermal control, pack usually doesnt exceed 60degC -Thickness swelling during heavy load doesnt exceed 5%, compared to 15% of a normal Lipoly during heavy load. -Higher capacity during heavy discharge. More than 90% at 100% C rate. -Fast charge capable, up to 15C on some batteries. -Longer Cycle Life, almost double that of standard lipoly technology.
Btw warton i am 1jakub from rcportal.sk
I will continiue speaking english due to internationality of this site.
I am a bit affraid, that this gap can lightly cut one of wires as this gap did to my another battery. Wires of this battery are bigger than the on orginal nimh from traxxas. Should i abrase this gap?
Ok, Whats the difference bvetween this batt(specificly for traxxas) vs the regular nano tec or any other lipo batteries? i have a 1/10th slash vxl 3s, is it just the plug? i have used a reg turnigy 2200 3s bat and a adapter with no problems. Can someone please tell me the difference?
Brilliant Battery! Nearly over discharged it whoops, still going strong.
Awesome rating, probably underated! i put 2400 MaH into mine a few times. Awesome power to, standing backflip stuff!. Would Recomend to anyone!!
Many of these Nano-Tech batteries have a charge rate much greater than 1c. I believe most will be 5c, ive seen as high as 10c. That being said, this 2.2ah lipo can be charged at 11 amps (5c), and provided you could find a charger that does it, it all translates to 15min charge on a fully dead pack. Most lipo batteries will list thier charge rate on the pack and unless it says otherwise, stick with 1c. Just explaining my stance on why NANO TECH IS THE ****!!!!!!!!! :)
With the 3S you got more power an top speed, with the 2S you can drive longer time runs. If you have tracks with a lot of corners, you maybe have mor fun with 2S, because you can drive a long time. If you love to reach highest top speed, your better with 3S.
Don't use two of them in serial! The original Traxxas Brushless ESC only can handle 3S. Two of 2S serial would be 4S. You can use two 2S parallel, or two 3S 1400mAh parallel. The serial connector is for using two of the original NiMH pack in serial.
Any Rock crawlers out there... Would these batteries be suitable for an Axial AX10 crawler with a 55 turn motor? Would anyone have a guess at approximate run times?
I am asking because i would like to be able to use one type of battery for both my AX10 as well as my 1/16th revo.
Well that completely depends on what kind of motor you are using.Lipo can be used on a none cutoff esc but do use a lipo buzzer.I have a gmade r1 with a speedpassion rhino brushless crawler set on a 2s 3300mAH lipo and i have a runtime of way over 3 hours. and that is driving constantly.
This battery works great in the Turnigy monster beatle :-) Just had to make an traxxis to XT60 adapter although its quite possible to swap the connectors.
4 comments. Reply..
Very good lipo, strong !!! It is long 87mm and not 97 as hobbyking stated.
Other infors are ok , battery is small and light, better than any Turnigy www.link 2200
Max Charge Rate (C) 10
2 comments. Reply..
tehere are some measurmet of first cycle in my revo vxl its quite suprising ;) the voltage on the and not below to 3,2V under power;) look here www.link look on the voltage stability i will reffered on 10cycle;)