More than just a fancy name. TURNIGY nano-tech lithium polymer batteries are built with an LiCo nano-technology substrate complex greatly improving power transfer making the oxidation/reduction reaction more efficient, this helps electrons pass more freely from anode to cathode with less internal impedance.In short; less voltage sag and a higher discharge rate than a similar density lithium polymer (non nano-tech) battery.For those that love graphs, it means a straighter, longer curve. For pilots it spells stronger throttle punches and unreal straight-up performance. Excellent news for 3D pilots! Unfortunately with other big brands; numbers, ratings and graphs can be fudged. Rest assured, TURNIGY nano-techs are the real deal, delivering unparalleled performance!Spec.Capacity: 3300mAhVoltage: 3S1P / 3 Cell / 11.1VDischarge: 25C Constant / 50C BurstWeight: 263g (including wire, plug & case)Dimensions: 146x43x20mmBalance Plug: JST-XHDischarge Plug: 4mm bullet-connector *The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. 1) The nanometer conductive additives form ultrastrong electron-conducting networks in the electrodes which can increase electronic conductivity. 2) These additives create a superstrong ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.Advantages over traditional Lipo batteries;-Power density reaches 7.5 kw/kg.-Less Voltage sag during high rate discharge, giving more power under load.-Internal impedance can reach as low as 1.2mΩ compared to that of 3mΩ of a standard Lipoly.-Greater thermal control, pack usually doesnt exceed 60degC-Thickness swelling during heavy load doesnt exceed 5%, compared to 15% of a normal Lipoly during heavy load.-Higher capacity during heavy discharge. More than 90% at 100% C rate.-Fast charge capable, up to 15C on some batteries.-Longer Cycle Life, almost double that of standard lipoly technology.
PRODUCT ID: N3300.3S.25
No, Its too long and too wide. The battery door is 39mm wide, 28mm tall and approx. 115mm deep. Do keep in mind the battery wires will take up some space when the door is closed. The stock Phantom battery is * 110mm long accounting for the wires. Hope this helps.
I have run this battery thru 10-15 charge/discharge cycles and so far I am very pleased with it. My charger and my Watt's Up meter both indicate the capacity is right around 3300 mAh. I charge it at 1C and discharge it at up to 30A, which is around 9C. It gets a little warm at 30A but not to the level I would be at all concerned about. Postal scale says it weighs 254g, which is 9g less than advertised, which is a good thing.
1 comment. Reply..
I fly two of these in parallel in my Zephyr2 with no issues. I've since purchased two nano-techs for the EZStar, two for the Tricopter and various smaller nano-techs for my other projects..
Wonderful battery, gives me about 15 mins fly time on my quadrocopter
2 comments. Reply..
Great battery, I use these on my quadcopter and get 10 minute fly times in the cold winter. This should improve as the weather warms up here on the east coast of the US. My only gripe is having to swap out the bulky connection for an XT60.