USA warehouse now open. Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
An extremely powerful brushless system for any 1/10 or 1/12 scale truck, car or buggy, the Hobbyking X-Car series offers high performance and great value in an easy to use combo package. With this system, the motor and ESC are matched for best performance which saves you the hassle of choosing separate components yourself. Simply solder on your favorite connectors, install a pinion gear and your ready to run!
Features: ESC • Enhanced throttle response, precise throttle linearity, excellent acceleration and strong brakes • Programmable with the Hobbyking X-Car programming card to make adjustments. (included) • Automatically detects the number of cells within the battery pack. • Multiple protection features: Low voltage cut-off protection, over-heat protection, throttle signal loss protection and motor blocked protection. • Compatible with NOVAK, LRP and ORION Sensored brushless motor. Motor • High quality anodized CNC finish. • Adjustable timing allows for fine tuning. • Sensored operation ensures smooth startups and acceleration. • Large cooling holes to keep temperature low. • High efficiency operation.
ESC Specs: Continuous Current: 45A Burst Current: 190A Resistance: 0.0010ohm Suitable Car: 1/10, 1/12 on and off road Battery: 2-3 cells Lipo (5-9 cells NI-xx) BEC output: 6V/2A switch mode built-in Motor type: Sensorless and sensored brushless motors Running mode: Forward only or forward with reverse (user programmable mode) Dimension: 42 x 28 x 36mm Weight: 78g
It depends what you want it to do. If you want it to be reasonably fast then this motor would work great.
I have a 3000Kv motor in my wraith with the standard 19t pinion and it is really fast!
Thank you very much, at the end I picked up the Trackstar 60 amps with sensors and a motor 17.5 turns 1800kv with sensors and also i will crown pinion 10 and 87, I want it to be slow for crawler
Hey everyone, I want to get this for my b4.1, does the combo come with connectors between the motor and esc or do you need to buy them separately and solder them, thank you in advance!
hi folks!
is this combo suitable for a 1/10 crawler with a 540-class brushed motor installed in origin?? best lipo battery? I don't need speed..the crawler will be used for ground fpv.
thx
you can but you will need to gear down a lot, according to the spec, the motor would be compared with a 21-23 turn brushed mototr.
in the crawler I run, I have a 55 turn brushed.
if you know how many turn the stock motor have you can figure the pigion you need.
Temps less than 75C range are preferred. Temps exceeding 100C can degauss the neodium magnets in the motor and ruin it. First line of defense is to put a smaller pinion gear on it.
depends on the class of your engine, this is a .36
In fact, the distance between a hole and the other for the fastening of the engine depends on the class of the same
Hello
I own an HBX Stealth X09, and would like to upgrade it with a brushless motor. Since im very new at this, i would like to ask if this set would be something i can use on my Stealth? And if so, we do i need ANYTHING else to install it?
Finally, do i NEED lipo battery for this setup? or can it run on both Lipo and NiMh?
Hello, this could be a great BL upgrade for your HPI Blitz. If you combine this setup with a LiPo battery 2 or 3 cells would it be great.
If you have got any further questions about BL, feel free to ask. If this was helpful, feel free to credit me :-)
... I don't know what setup there is in a stock HPI Blitz, but this would be a good choice anyways. If you want something a little more powerful, can you choose the 13T motor and ESC. It's faster than this, but this setup is a good choice for first BL upgrade.
This setup would be a little under powered for a blitz, wait, way to under powered, I have one as well with a 9.5t and a 2 cell lipo, it runs like a dream, hope this helped!
I am looking to upgrade the stock brushed motor in my Traxxas Stampede XL-5 truck. Will this set be a good replacement and give me more speed and power?
I have used this website *******scriptasylum****/rc_speed/top_speed.html to measure the speed from the motor and gears sizes. On my SC10 when I changed from brush 27 turn to brushless 17.5 turn it had more torque and less top speed. However, if you increase the size of pinon gear and decrease the size on spur gear you will get higher top speed and less torque.
What I found are...
_Turnigy balancer Charge 2S-3S. Direct 110/240V input $11.44
_Turnigy 2200mah 2S 20C lipo pack $8.79
_X-Car Brushless Power System 4000KV/60A $79.99
Is this look OK to you? Thanks.
Hi all, I am new about a brushless combo and I want to make my 4x4 on road 1/10 electric go fast just for fun. What should I choose? Can I still use my old 2000 Nickel Cadmium battery for brushless combo set? BIG thanks.
Hello. If you just want it to go fast, don't buy this set. You will need more KV. The KV is how many RPM your motor takes per volt. I would say that a 9T Brushless motor would be fine in the beggining, i think ot's 4000 KV or something..
And you'll have to change your battery to a LiPo pack. Either 2 or 3 cells. You will get most power from the 3S, but i would take the 2S. Remember to buy a LiPo Charger aswell. Remember that you only shall upgrade your cars motor, ESC and battery, if it can handle it. Please give me 20c if my answers was helpful. Anyways, if you have any further questions, feel free to ask :)
I've never had probs with the smooth startups of hk esc's/motors. The problems lie in motor torque and drag brake depts. Look at the pic of the back of the program card, drag brake stops at 30%. When hk offers 4pole clones along with 100% drag brake in their esc's, I will try them again.
Customer Reviews
Overall Rating
jardakt
28 likes
Value
Quality
Like it?
That's a great upgrade for any SCT, Buggy or rally car with 2S or 3S ( depending on gearing). Lot of Torque, low consumption, smooth start, great acceleration, low heating. Wery easy to program with the HK 150A esc card. Can be used on crawler or expedition car too.....
2 comments. Reply..
Overall Rating
Ryan
5 likes
Value
Quality
Like it?
Got this to use drop in a short course truck for racing at my local track. usually drop a lot of cash for gear, but wanted to get my son into something cheaper. This little combo is amazing. There is no "cheat" or "boost" mode for the ESC, but it is super easy to setup and adjust with the programming card. Very good quality. I would definitely consider getting another. The ESC stays very cool with this motor, so I took the fan off. Can't beat this thing. Very smooth at slow speeds. Just have to wait a week or two for shipping to us, but WELL WORTH IT!
No comments. Reply..
Overall Rating
jack796
6 likes
Value
Quality
Like it?
This combo works well in: Crawler Kyosho's Rock Force 2.2 .
Very easy to program with card. Long crawling time with Turnigy 2200mAh 3S 20C Lipo Pack (PRODUCT ID: T2200.3S.20)
Really Smooth start and acceleration. Very good safety feature is you can program forward/neutral/reverse. Speed control has loud fan but not big deal in crawler type "car". Rock Force has Screw drive system and it's not silent at all ;). QUALITY/PRICE in right order. Gonna buy more these Hobbyking combo's.... Cheap and High Quality Products..
I bought this system to install it in my daughters car. She is only 4 years old, so the option of limiting the maximum throttle is genius. She can now drive the car herself, and as she gains experience, I can turn up the speed :-) I bought another set for my rally car, and it is really responsive and has good torque and speed. I can really recommend this product.
No comments. Reply..
Overall Rating
2/1/2013 Ronald
6 likes
Value
Quality
Like it?
The best product on hobbyking ive ever bought!!!!!!!!!! This is an awsome combo and fits directly into a 1/16 summit brushed!!!!!!works awsome!!! PROS CONS very smooth! :D nothin ive had nothing wrong!!! Very powerful!!! Awsome brake and drag brake!!! Everythings AWSOME!!!
This fits into 1/16 1/12 and 1/10 cars and trucks!!!!!!!! very awsome!!!!!! :D
Copyright 2012 Hextronik Limited.
The HobbyKing.com®, OrangeRx, Turnigy, Durafly, nano-tech and other brand logos and names are trademarks of hexTronik Limited.
All rights reserved
.jpg){kind=small}
