USA warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
  Item found in the following categories;
> Multi-Rotors & Parts > RTF / PNF / ARF


Turnigy Micro Quad V2 PNP ARF Includes KK2.0 LCD Flight Control Board

Turnigy Micro Quad V2 PNP ARF Includes KK2.0 LCD Flight Control Board
Turnigy Micro Quad V2 PNP ARF Includes KK2.0 LCD Flight Control Board

This tiny yet brilliantly designed PNP micro quad makes getting into hobby-grade quadcopters easy! We've done all the hard work for you by choosing the power system, installing the motors/ESCs, soldering all of the connections and mounting/setting up the control board.

***STOP Press!!*** UPDATED: This is the new Turnigy Micro Quad V2 which now includes our brilliant KK2.0 LCD flight control board!

This quad is the real deal, not a toy-ish micro with brushed motors and cute body shells. It features a high performance brushless power system and the highly capable, fully programmable Hobbyking KK2.0 Control Board.

With the Turnigy Integrated PCB Plug and Play Micro Quad, you simply need to add your own 4CH transmitter/receiver, 500-900mAH 2S 7.4V lipoly battery, setup your radio, complete the pre-flight check, mount the propellers and your ready to fly!

Updated to include our KK2.0 Flight Control system:

The original KK gyro system has been updated to an incredibly sensitive dual chip 3 Axis gyro and single chip 3 axis accelerometer system making this the most stable KK board ever and allowing for the addition of an Auto-level function. At the heart of the KK2.0 is an Atmel Mega324PA 8-bit AVR RISC-based microcontroller with 32k of memory. An additional 2 motor output channels have been added to the KK2.0 allowing for a total of 8 motors to be controlled (Octocopter) to allow you to use this flight control system in any quad you wish!

Micro Quad Features:
• Light weight design
• High efficiency brushless power system pre-installed
• Integrated PCB frame making for a tidy wiring layout
• PNP configuration taking the guesswork out of choosing your own components
• KK2.0 LCD flight control board

Included in box:
1 x Turnigy Integrated PCB Plug and Fly Micro Quad (motors/ESCs/ KK2.0 control board pre-installed)
4 x Propellers (2CW & 2CCW)
4 x Servo extension leads (for connecting your receiver to control board)

Required items:
500-900mAh 2S 7.4V Lipoly Battery
4 channel transmitter and receiver
Battery charger

Width: 250mm
Height: 85mm
Motor: 4 x Turnigy T1811-2900kv Brushless
ESC: 4 x Turnigy Plush 6A
Props: 4 x 5x3 inch (2CW & 2CCW)
Control Board: Hobbyking KK 2.0 LCD Flight Control 
Battery Connection: JST

PRODUCT ID: 9171000150

This product available from a warehouse near you!

Weight: 500g Quantity: 
United States Warehouse In Stock View Item

  • Turnigy 500mAh 2S 20C Lipo Pack

    Combo Price: $3.75   IN STOCK

  • Turnigy nano-tech 850mah 2S 25~40C Lipo Pack

    Combo Price: $5.95   IN STOCK

  • OrangeRx R615 Spektrum/JR DSM2 Compatible 6Ch 2.4Ghz Receiver

    Combo Price: $5.85   BACKORDER

  • Turnigy Battery Strap 330mm

    Combo Price: $1.55   IN STOCK

  • 5030 Propellers (Black) - 3xCW and 3xCCW - 6pcs per bag

    Combo Price: $3.45   IN STOCK

  • 5030 Propellers (Red) - 3xCW and 3xCCW - 6pcs per bag

    Combo Price: $3.45   IN STOCK

  • Aluminum Carrying Case Turnigy Integrated PCB Micro-Quad

    Combo Price: $11.39   IN STOCK

  • Turnigy Integrated PCB Micro-Quad (KIT)

    Combo Price: $14.95   BACKORDER

  • Turnigy 9X 9Ch Transmitter w/ Module & 8ch Receiver (Mode 1) (v2 Firmware)

    Combo Price: $59.95   IN STOCK

  • Turnigy 9X 9Ch Transmitter w/ Module & 8ch Receiver (Mode 2) (v2 Firmware)

    Combo Price: $59.95   IN STOCK

  • OrangeRx R620 Spektrum/JR DSM2 Compatible Full Range 6Ch 2.4Ghz Receiver w/Failsafe

    Combo Price: $12.91   IN STOCK

Further discounts available for registered & logged-in customers.
 Customer rated
Total of 216 discussions.
Uttam  4 points - 3/24/2014
Anyone have the Thrust/Weight(all up weight) and flight time for this?
ken  1 points - 3/9/2014
it the kk2.0
ken  1 points - 3/9/2014
hello im new to quads. I just ordered this quad. can I use a 2s 7.4v 1300mah 30c lipo? or will that battery damage it? thanks
 wt290 3 points
As long as it is 2S (7.4V) you won't have any problems. The 1300mah is a bit heavier than the recommended 800mah so it may not be as "zippy" in flight but I'm sure it has enough grunt to lift the 1300mah pack. Going to a 3S (11.1V) may be an issue as the ESCs aren't the strongest ones around - see the product page for the Plush 6A for the details.
 David 1 points
You will also want to purchase the cables to flash version 1.6 because self leveling is better and for beginners this small quad needs to be flown in self level mode otherwise it is very hard to control- all instructions for kk2.0 setup can be found at ****rcmanchild****
Andrea  2 points - 3/6/2014
I don't already have it in my hand, but I think this is the quadcopter that I want. I think is perfect for one idea that I have. I understand that the frame is in PCB. For me this is no problem. I know that with this frame I can not endure too many crash. But I reapet, no problem *) Only one thing that I don't undestand: About the propeller. I see this comment: "Later on, I realized that if you don't ream out the props before putting them on they will be guaranteed to crack and this annoys me because the box simply said put on the props and fly." What "Ream" means? I can not translate it in my native language (Italian). Can anyone tell me something about the propeller?
 Epoch 27 points
ream 1. widen (a bore or hole) with a special tool. So it means to drill the hole bigger or widen it with a tool, such as a reamer. A reamer is like a pointed knife tool used to make a hole bigger.
Carlos Augusto  4 points - 3/5/2014
this quad works only with propeller apc ? or work with gws propellers?
 David 1 points
I purchased propeller adapters for a 2mm shaft (that the Turnigy 1811 motors have) that will accept a 5mm propeller hole so you can use any prop close to the recommended 5x3 but I use the Gemfan 5030 (5x3) that has a 5mm hole because they come in different colors, remember to buy both normal and reverse pitch in the same colors
Customer Reviews
Overall Rating
Like it?
Good Quad for the money. No instructions included with mine. All I could was find was the control board instructions. Installed the props and receiver and it flew god for about 5 minutes til 1 prop fell off at about 60 feet in the air over pavement. needless to say this was the end of the frame and 1 motor. All the prop hubs were cracked. The holes in the props are to small for the motor shafts so the prop hubs cracked when I pressed them on. After rebuilding it with a new frame and motor it flys good. Just drill out the prop hubs just a little smaller than the motor shaft size balance them then ca the props on.

2 comments. Reply..

Overall Rating
Like it?
the electronics of the quad is great very stable, the only problem i had was that the quad frame is very weak... drop it about 1 meter and one of the piece that mounts the motor broke off... so just gotta say be VERY VERY CAREFUL! don't drop it!

1 comment. Reply..

Overall Rating
Like it?
This quad-copter is amazing for its value but there where some cons 1. The material the used(PCB) is very weak as I broke it when I got it. 2. The nuts to hold the motor in place is extremely small. 3. The propellers where extremely hard to put on as the shaft on the motor is larger than the hole the propellers. 4. The propellers are very weak. 5. The wires where on soldered on properly and came off (or may be it was just mine) Now for the pros. 1. The ESCs there extremely powerful for its size. 2. The motors give a lot of torque. 3. The model came with the KK2.0 flight board which was very impressive. 4. The parts where very easy to repair. 5. The handling of this quad is outstanding! This kit is a very beginners kit as it almost comes complete. The parts I you to fly it where Turnigy 9x tx set, Hobbyking Simplex lipo charger, Turnigy nano-tech 850mah 2s and the kit its self.

2 comments. Reply..

Overall Rating
Like it?
Super produit, une fois déballé de sa mousse de protection faite sur mesure pour le transport, il suffit d'installer un récepteur 4 ou 5 voies, vous branchez une batterie 2s 850mA mini ensuite vous suivez les instructions sur la carte "contrôleur KK.2 nouvelle génération" C'est hyper facile à mettre en l'air et ça vole du premier coup. Un seul bémol prévoir des porte hélices pour améliorer la sécurité de votre modèle. Pour les accros des réglages bien lire la notice en français car cette carte est vraiment géniale. En clair ce Micro-Quad est un super joujou.

1 comment. Reply..

Overall Rating
Like it?
Good in theory but the design and material used lets it down. One hard crash and you will break a motor mount. The material isn't fibre glass and is very weak. Plus the holes near the motors weaken it further. You are better off getting the "Micro Integrated PCB w/ESCs Quadcopter Frame 235mm (KIT)" in my opinion.

No comments. Reply.. here to see all reviews
Aff. Link