USA warehouse now open. Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
Yes, you need to drill a hole in the bottom side of landing gear. Next you will need to use landing gear axle (like this ID: OR016-02201x5). Put it into the drilled hole and tighten with nut. On the axle part put your wheel and fix it with landing gear stop (like this ID: 016-00303x10). Regards
Thank you for answering my question, but I guess I worded it wrong. I meant how wide is the total width of the gear from axil mount to axil mount. This again is assuming that the top mounting areas are together. It's worth another .20, whoopy!
That's what I needed, thanks! These are for the HK Pilatus Porter. The "scale" gear is #%>!. I'm trying to keep it light as a good STOL should be. They need tough gear for banging around on rough runways in the outback. Now I just need som 3" soft balloon wheels I can't find anywhere!
Happy flying!
It is measured from the flat mount plate directly down to the ground surface, so basically a 150mm clearance from mounting plate to ground. Very good landing gear.
Does anyone know the actual height of this gear is once the rearward rake is taken into account? I expect it is less than 150mm, just as the 160mm gear is a good bit less than 160.
Hello! You could mount those gear legs with bolts and lock nuts or blind nuts in the wood. Here are a few pictures for reference. Remove the spaces in the link: h t t p : / / w w w .wattflyer . c o m /forums/showpost.php?p=542688&postcount=21 Have a nice day!
The width of the gear legs where they are attached to the fuselage is 20mm. Please see these pictures for reference and other dimensions. target=_blank>target=_blank> All dimensions are in milimeters.
The width of the gear legs where they are attached to the fuselage is 20mm. Please see these pictures for reference and other dimensions. www.link dimensions are in milimeters.
The width of the gear legs where they are attached to the fuselage is 20mm. Please see these pictures for reference and other dimensions. *******yfrog****/e8cfgear150mm1j All dimensions are in milimeters.
The width of the gear legs where they are attached to the fuselage is 20mm. Please see these pictures for reference and other dimensions. It seems the site hides h t t p : / / and . c o m . Please add these without the spaces and you'll get a link for the images. Sorry for those many posts. h t t p : / / yfrog . c o m /e8cfgear150mm1j h t t p : / / yfrog . c o m /2ccfgear150mm2j All dimensions are in milimeters.
How do we fix it? Overlaping the "base" ==== / \ / \ 0| |0
or not overlaping?
__ __ / \ / \ 0| |0
Customer Reviews
Overall Rating
Junior
90 likes
Value
UNRATED
Quality
UNRATED
20 thumbs up!
I'm a bit sceptic about these gears. When I took them out of the box I got suprised cause they are very small. I bought them for a 1,8kg electric 3D plane but they seam to be small. At the wheel side they are only 10mm wide - think about it, if you drill a 3-4mm hole, you only have 3,5-3mm besides the hole... That's not an insurance for a little bit bouncy touchdown. Hope they have some fiberglass in them to make CF a bit flexible. The photo is a bit misleading... Sorry guys, but this is only my point of view, could be great for lighter planes.
5 comments. Reply..
Overall Rating
Hank Deucker
27 likes
Value
UNRATED
Quality
UNRATED
19 thumbs up!
The product is of excellent quality but because of the sharp rake when mounted it is totally unsuitable for my YAK54 40e.
The product description should list this specification.
Regards
Hank
1 comment. Reply..
Overall Rating
Peter Cernic
likes
Value
UNRATED
Quality
UNRATED
9 thumbs up!
Nice piece of "carbon art". I use them under 1,1 kilo 3D model It is good quality but for harrier landings is suitable to make an X connection with 0,60 mm fishing line.
Than works perfect !
Regards,
P.
1 comment. Reply..
Overall Rating
NoPanic
66 likes
Value
UNRATED
Quality
UNRATED
Like it?
put this on may extreme flight yak 47 works well!! verry light, much better than standard alu gear!!
No comments. Reply..
Overall Rating
yosemite
33 likes
Value
UNRATED
Quality
UNRATED
Like it?
Great landing gear, light, and stiff. I use it for my Slow Stick as a replacement for the very soft stock landing gear.
Copyright 2012 Hextronik Limited.
The HobbyKing.com®, OrangeRx, Turnigy, Durafly, nano-tech and other brand logos and names are trademarks of hexTronik Limited.
All rights reserved
.jpg){kind=small}
That's what I needed, thanks! These are for the HK Pilatus Porter. The "scale" gear is #%>!. I'm trying to keep it light as a good STOL should be. They need tough gear for banging around on rough runways in the outback. Now I just need som 3" soft balloon wheels I can't find anywhere!
Happy flying! 
