GWS Park HPX Servo 19g/.05sec/3.6kg (Futaba Plug)

Total of 25 discussions.

Luis

4 points - 4/17/2013

Would this servo be a good fit for the elevator of a Su35 twin 70mm EDF Jet? I've already lost a Su35 due to a bad servo on the elevator.

sharkey9

792 points

If it's not too big for your jet, it's a great servo. Extremely fast though strong. Needs a bit more power than similar type servos. Very precise, too.

HellyFlyer

1249 points

I would suggest a metal gear servo for elevators

Amandeep

14 points - 4/12/2013

Is this analog or Digital servo?

HellyFlyer

1249 points

This is a Analog Servo, but very strong good for Tail on a 450 size heli. Go for it.

BEST ANSWER CREDIT AWARDED

James

3 points - 12/31/2012

Will this fit the HK-450TT Pro V2 tail?? I have been searching for a decent tail servo that I can just put in the tail and have work.

Chris

48 points

I have this servo on the tail of my HK450, it is hooked up threw the HK 401B gyro and seems to be a good combo. Chris.

Chris

48 points

##Through##

HellyFlyer

1249 points

Yes this is a excellent servo even with the nylon gears this bigger than the normal 25 gms servo and the motor and gears are strong

aristotle

3 points - 12/11/2012

Hi,I have this servo to my 450 v2 and 25-30amp esc and a reciever AR6210 $pektrum why everytym I make an input on my rudder it always shutdown my reciever...shld I need to change my esc to higher amp?. Pls help...

sharkey9

792 points

You need an ESC with 3Amps BEC at least. This is a very fast and strong servo, needing more power than others. Or a good external BEC.

BEST ANSWER CREDIT AWARDED

HellyFlyer

1249 points

Yes this needs regular power use a good ESC with higer amp rating

HellyFlyer

1249 points

pls click on "award" below my name

uhuru

5 points - 8/16/2012

Can we have a more accurate update of the availability for these servos please!

HellyFlyer

1249 points

Available now Go Grab it

HellyFlyer

1249 points

pls award

aristotle

3 points - 4/1/2012

hi guyz,is this analog or digital?and what esc can i use on diz servo for my hk450,tankz...

Dongskie

228 points

Its DIGITAL, YES you can use it on your 450. I use it on my 450PRO TT. Happy Flying!

BEST ANSWER CREDIT AWARDED

johnfb

8 points

its digital, quit good for CCPM type of swash...max 450 size...for plane, good enough as well , i am using this servo for 3d 46 size plane and works amazing that the standard servo...less weight

bmheli

34 points

Correction, this is a ANALOG servo. And may use it only in the tail. Pay attention to the total consumption for the choice of the correct Esc.

Julio

14 points

It is not digital. I used it on my 450 for the tail and it works well. Its a fast servo.

m-werk

3 points

digital or analog? what now

bmheli

34 points

This servo is analog. To be digital this had to be marked with PARK HPX D or PARK HPX F D. See the File tab for the spec table in the GWS site and note de observations in the bottom. D= digital There is no D in the label of that servo. For more details see the GWS web site.

HellyFlyer

1249 points

This is a Analog Servo,. any ESC with min 3 amp BEC will do

Dongskie

228 points

Thank you.

HellyFlyer

1249 points

already answered

aristotle

3 points - 12/7/2011

can i use this to firefox 200 w/ hk t6a rx?pls help

shekeab

5 points

yes as long as you get a standard, 3 pin receiver

BEST ANSWER CREDIT AWARDED

Dongskie

228 points

Yes you can, but be mindful of your ESC's BEC, More servos means more amp draw :) Good luck!

HellyFlyer

1249 points

Already answered

Fl00k

12 points - 10/22/2011

Do these take futaba, hitec or jr arms? Still pretty new to this so not sure, I need it for a 450se v2. Thanks

MADDIVER

178 points

Futaba and Hitec plugs are similar. You can use this servo with a Futaba or Hitec on a 450 class heli.

BEST ANSWER CREDIT AWARDED

HellyFlyer

1249 points

already answered

Javen

39 points - 9/24/2011

Can i use this for my Turnigy 9x receiver?

Mohd Zairul

6 points

yes i have use my turnigy 9x receiver and i fly hk500gt...

BEST ANSWER CREDIT AWARDED

Dongskie

228 points

Yes you can, I currently use this on my HK500GT tail servo :) Happy flying!

HellyFlyer

1249 points

already answered

Şule

1 points - 8/6/2011

I bought the Turnigy tg90s Braz problem they've had as a little deaf, servos servo body, I recommend to everyone am super tail

Fernando

44 points - 8/3/2011

can i use in a zagi wing?

christiano

76 points

be perfect

BEST ANSWER CREDIT AWARDED

Dongskie

228 points

Thank you!

More than glad help :)

wind556

6 points - 7/29/2011

Hi

There isn’*t enough information for this servo

u Sec ?

Hz ?

Is it working perfect with the ga250? (On 250 heli)

Is there any better servo for this purpose in around this price - ?

Pleas advice

Thanks

Oded

aerobatic19

25 points

this servo is good for first flight because its analog
check clone servo 9257 *)

nowinkk

840 points - 6/29/2011

The difference is only the plug type, JR or Futaba, but why is this Futable plug type more expensive than the JR plug type by almost 50%?

edudominguez1

46 points

Indeed the only difference is the connector. JR is in backordery may not be current prices or simply confused by putting one of the two.
Some time ago I bought a Futaba and JR and a friend work the same.
Buy whichever is cheaper.
other products also face two prices is good looking and always buy the cheapest.

Hope this is helpful.

Heli-450

18 points

You can file the tab of on the Futaba to use in a JR receiver. Black = Brown White = Orange. When I bought this servo it was cheaper than the one with a JR connector.

Nicopter

5 points - 6/18/2011

For a 450 Trex Tail, Gy 420, this servo burnt after 2 minutes of settings !!! Why this evaluation is always erased ?

edudominguez1

46 points

They were exposed to verify that the digital servo 420 grams. if so burn any non-digital servo. This is a bug that breaks servos no fault of theirs.

zenzen

52 points - 3/2/2011

is it good for a mini inferno?thank you

Tiago

16 points

Very good , i use on my 450, perfect fast and precise.

zenzen

52 points

thank you

MADDIVER

178 points - 2/18/2011

Is it a digital servo or not? How can I understand this?

Diogen151

82 points

This servo is not digital ! Sometimes you can hear screeming sound from digital servo(s), but, the best way is to look at specs to find answer if it is digital or not. This servo is Ok, and watch her how it is fast and precise: www.youtube.com/watch?v=h_Pll7pnauw

bronya

218 points

Most of manufacturers add word "digital" on sticker or append char "D" to model #

BEST ANSWER CREDIT AWARDED

firehopper

14 points

from what I can tell it is a standard analog servo

MADDIVER

178 points

Thank you all for ypur prompt answers!!!
I bought one for my HK401B gyro on my CX450...
I hope this configuration, HK401B with a GWS Park Servo will work... :)
So, you' r telling me to adjust the HK401B gyro according to analog servo settings?
Thanks!!!

wifly

50 points

its NOT digital. its a high speed analog servo

David

62 points

Servos are considered Analog unless they say they're digital.
Digital servos cost a lot more than this, at least double.
This is a fast analog servo, that's all.

NEIL

46 points

No, It is not a digital servo. It is very fast though and I am using one for a helicopter rudder servo and it works well. It just won't have as much holding power as a digital servo.

foot8sativa

43 points - 1/27/2011

Anyone know of a good replacement horns/arms?

tommatador

18 points - 9/10/2010

i bought 4 and they all work great BUT when i connect 2 servos with Y-cable, 1 is not working a 100%: uncontrolable movements etc etc...how does that come?

Emre

6 points

Did you try all combination with Y cable? The problem can be on y cable

SteveM

13 points - 11/16/2009

Three questions......
Please advise:-
-
a) Is this compatible with the new HK401B gyro?
b) Is it ballraced?
c) Any firm idea of when in stock next?
-
many Tks, Steve

acepro

66 points

a) Yes
b) No Idea
c) In stock now

totoro

178 points - 11/10/2009

Any one know if this servo is compatible with Assan 410 gyro ?

fats flyer

103 points

yes ,it is

nicohaas

35 points - 8/31/2009

Can you use this servo for a IC engine?
I have it on tail on my q500. Dit not fly it yet.

nicohaas

35 points

I dit fly it now , no problems at all , very fast servo.

ECTOR

152 points - 5/3/2009

Last week i order that servo for my HK450 heli also i order one ASSAN GA510 Tail-lock Gyro. I use till now Futaba 401 gyro. Any one know if that servo is compatible with that gyros ?

softimagge

303 points

NO!!! see gy510 review by Alvaro.

marcos

108 points -

This servo GWS Park HPX Servo 19g/.05sec/3.6kg (Futaba Plug) is analogue or digital?

GlenWyatt

89 points

Analogue

Zsolt

11 points -

Hi,

this is the Park Hpx F version? Because only the F version has these speed/torque values, the standard Park Hpx doesn't...

Thanks.

lee8org

573 points

It is HPX

lee8org

573 points

Correction it is "HPX F" 19g 0.07s 3.0kg/cm Point for you Zsolt

myzyo

17 points -

is gear metal?

martseger63

215 points

you can see it's not.
they're plastic, i have this servo on trex450 tail, its very good

Customer Reviews

Overall Rating		å¸ä»¤ 36 likes
Value	UNRATED
Quality	UNRATED

17 thumbs up!

It is good servo very fast ,I use it on HK-450 tail .

No comments. Reply..

Overall Rating		Jozef Sklenar likes
Value	UNRATED
Quality	UNRATED

16 thumbs up!

-After fast stick move, servo may overrun desired position by few degrees, and return back a bit slower. Good, not oscillating around, just slowly "fine-trim" the arm position.
-Position is centered well, no problem.
-With discharged receiver pack, I have encountered jitter on another servos, while PARK HPX was moving - it indicates serious current consumed by this servo, so use serious receiver pack and solid wires.
-Servo is really very fast, that is true. And strong.
-Moves silently, I can not measure sound level but I say it is only half of a noise of my other servos.

No comments. Reply..

Overall Rating		helibrasil.com 71 likes
Value	UNRATED
Quality	UNRATED

15 thumbs up!

Pay attention, the correct Specs are:
- 0.10 sec @ 4.8v
- 0.08 sec @ 6.0v
- 58.00 oz/in @ 4.8v
- 67.00 oz/in @ 6.0v
- 1.21 x 0.64 x 1.12 inches
- 0.67 ounces
- 4.8v or 6.0v

2 comments. Reply..

Overall Rating		Customer likes
Value	UNRATED
Quality	UNRATED

13 thumbs up!

It is a very fast, accurate neutral.
It is the best for the ladder servo of the helicopter of 450 classes.
I am using this servo for most airframes.
Compatibility with 401 of FUTABA is also good.

No comments. Reply..

Overall Rating		Customer likes
Value	UNRATED
Quality	UNRATED

8 thumbs up!

I bought 10 of these and am very pleased with the speed. They do not show jitter at all. I used them instead of Hitec 225's.

No comments. Reply..

.....click here to see all reviews

GWS Park HPX Servo 19g/.05sec/3.6kg (Futaba Plug)

GWS Mini Park Series Servo. (smaller than a standard size servo, though larger than Nano/Pico Servos) Model: PARK HPX Size: 30.86x16.17x28.5 Weight: 19g Speed: (4.8v: 0.07sec)(6v: 0.05sec) Torque: (4.8v: 3kg)(6v: 3.6kg) PRODUCT ID: GWSPARKHPXF/BB/F

GWS Mini Park Series Servo.
(smaller than a standard size servo, though larger than Nano/Pico Servos)
Model: PARK HPX
Size: 30.86x16.17x28.5
Weight: 19g
Speed: (4.8v: 0.07sec)(6v: 0.05sec)
Torque: (4.8v: 3kg)(6v: 3.6kg)
PRODUCT ID: GWSPARKHPXF/BB/F