KB45-10XL 1200kv Brushless Inrunner

Total of 8 discussions.

MrBeen

2 points - 8/26/2012

What kind of cooling is availible for this motor? Jacket or others??

WJD333

1 points

HK sell a water cooling jacket for B4563 motor that will fit a KB45, it's been on backorder for some time now so it should be in stock soon hopefully. Page 3 of hardware for electric boats.

MrBeen

2 points

Thanks for the reply Wayne

. I saw that eventually but as You mention it's been on backorder too long. I ended up ordering the Turnigy AquaStar T20 instead. It's going into my fathers 1.4m speedboat and it will be very exiting to see how it will perform on 6s LiPo.

The mad one

53 points - 4/27/2012

is it for 3s?

dhruv

103 points

Will work good with 30-36 v.

Alessandro

1 points - 4/14/2012

How many poles does this motor have?

gromuluss

218 points - 2/19/2012

There is no amp rating posted Can it take 100 amp bursts for 15 sec or longer?

The mad one

53 points - 2/16/2012

what is the max voltage?

chickendog

20 points - 2/27/2010

Where do you find joint/couplers for 6mm shaft and the motor mount?

Thanks

Fahrenheit-145

255 points

Our Couplers are selfmade,if you want one please email me.
mup1(AT)fahrenheit145****
Greetings Peterr

dcptr

57 points - 10/6/2009

Can I run this on a 2000g pusher prop f-16?
on a 1400kv outrunner with a 7X5 prop puts out about 2000W
would this motor be suitable? running 6s setup.

Simon

19 points -

have this motor enough power to powering an electric scooter

VUO4E

38 points

No, not for a scooter. not nearly. You'd need at least 3

ioanna

41 points

yes for 6 kmh i ve seen one with the 150esc and with a big outrunner

Customer Reviews

Overall Rating		Duderino likes
Value	UNRATED
Quality	UNRATED

11 thumbs up!

Good buy. Working fine in 42' catamaran with 24 NiMh and 100HV BESC. To avoid too much heat, need a slightly bigger prop than german motors.

2 comments. Reply..

Overall Rating		kitti phranranasontronkun likes
Value	UNRATED
Quality	UNRATED

5 thumbs up!

I use this motor with my boat Size 33''
it works very well..Excellent

No comments. Reply..

Overall Rating		Diamondaine 8 likes
Value	UNRATED
Quality	UNRATED

3 thumbs up!

Very great Motor, i'm using it in an 1/8 scale MonsterTruck like the MGT8.0 with 12,2:1 gearing, very good torque, it does an wheely at 20km/h and has an Maximum Speed which is about 65km/h, plenty for an MonsterTruck in this scale! After an Ride with my 6S2P LiFePos (15mins) it has an approximative temperature of ~50C. But i recommend you to solder the 4mm connectors again! Because they are not very good solderd! 5Stars for that Price/Power!!!

No comments. Reply..

Overall Rating		G. Soares 8 likes
Value	UNRATED
Quality	UNRATED

1 thumbs up!

Otimo relaao custo beneficio. Um montro de motor.

No comments. Reply..

Create an account

Overall Rating		hooppjs 118 likes
Value	UNRATED
Quality	UNRATED

1 thumbs up!

Mounted this on a custom made mount sitting on an O.S. lower outboard unit. Started on 2 x 6s 3000MaH lipo wired in parallel and about 45mm prop. HM Skater 3o inch tunnel hull. Goes nice. Will try 7s and maybe 8s if the motor can handle it. Thanks, lovin' low KV motors with high voltage:)

2 comments. Reply..

.....click here to see all reviews