USA warehouse now open. Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
X8R9-L is a mini 9 channels receiver.
Compatible with all ASSANs RF modules.
Size: 57 X 32 X 10mm (2.24 X 1.25 X 0.39 inch)
Weigth: 10g
Antenna: 30cm
Key Features -Highly secure and robust link
-No crystals or channels needed
-No interference from motors, ignitions or metal to metal friction.
-30cm long antenna
-No need to change any settings on your radio.
-Works with all X8 systems.
Is this receiver compatible with the transmitter in the link below?
http://www.hobbyking.com/hobbyking/store/__2 0976__Turnigy_9X_9Ch_Transmitter_without_Module_Mode _2_v2_Firmware_.html
Thanks
I'm about to install one of these X8R9 Long antenna into a 700 size Jet Ranger fuselage. I've read that only one of the antennas is "active". Which one is it and how should they be positioned? At 90 degrees, parallel or what?
Ik vlieg al een paar jaar met assan heb nooit geen storing ik vlieg met zwevers van 6 meter heb twee zenders van graupner mx 12 heb daar een modul in zitten van assan ik 7 onvangers ik vind het geweldig ik hoef niks anders meer
le récepteur fonctionne tres bien,
avec accu lipo 2s 2100 mah www.link un régulateur, pour la tension
j'utilise ceci www.link ce système aucun probleme.
Can i use this receiver direct 7.4 2s lipo cell battery? And how many voltage it will give me to servos? And how many amps it will give me? I want to use it in high votage conf for a big bird
Hey im thinking about getting a Turnigy 9X, im really big into gliders so ill be needing all 9 channels, would this work would the standard modules? and if not could could i and in an ASSAN module? Sorry if a dumb question, still learning
Hi, you can't, Turnigy 9X use its own system, and the assan modules are only compatibles with assan emitter. I have an Turnigy 9x and a emitter module for Futaba FF9 and there is not compatible with the Turnigy 9X.
YES I HAVE A TURNIGY 9X WITH A ASSAN MODULE. YOU NEED THE JR STYLE MODULE FOR THE TURNIGY 9X. "I HIGHLY RECOMEND ASSAN FOR ITS RANGE AND RELIABILITY" THE TURNIGY 9X WITH A ASSAN MODULE IS JUST AS GOOD AS ANY TOP DOLLAR TRANSMITTER OUT THERE p.s. don't listen to that first guy's respone he dosn't know what he's talking about and should be booed
It will only if your TX have 9 channels working in the PPM mode. For example a graupner/jr MC 18 has 9 ch. only in PCM mode. In that case only 8 ch. will function. Hope you this answer helps you. In all cases nothing can be dameged and you can simply try it. The receiver is absolutly perfect. Grtz.
Hi Snake 92, i have several receivers like this. good reliability ! It is compatible only with the Assan system.It's the common rule for the 2,4 systems... Good flights
Hi, The answer is NO Works Only with ASSAN modules. Not only the price is right, but it works like the ten fold priced compettitors on the market. It's perfect. Hope theis was helpful to you, PP
Hi, Im newbie in 2.4 GH frequency, Does anyone know if ASSAN X9R9 reciever can be bind with the Turnigy 2.4 GH 9 channel Transmiter Mode 2 V2? Thanks Juan
No, only with Assan TX module. But you can buy Assan TX in JR formfactor and install it to Turnigy instead stock module. It is slightly cheaper but Assan provides more different RXes - including lightweight 2,9 gr.
Long antenna or short antenna has the same range. The available lenght allow you to position the aerial for the best receiving position. This seems so.
I have used both and can't fly far enough away to loose connection with either one. the only limitation i'm aware of is that carbon fiber interfears with the range
ormai sono passato totalmenta al sistema assan dopo varie incertezze ho sostituito tutte le mie riceventi pcm con queste, mai preso pi un interferenza, prezzo stupendo qualit ottima+++
Ja du darfst, aber dann empfngt das Ding NICHTS mehr. Die eigendliche Antenne ist das andersfarbige Ende des Kabels. Wenn du das abschneidest geht nichts mehr!!
Kann man machen, man muss dann halt die Abschirmung des Koax Kabels entfernen ber exakt die gleiche Lnge, wie vorher. Ist ein bisschen fummlig, aber machbar.
I need to know if your receiver X8R9-L could receive 8chs working together the module X8F installed in a transmisor Futaba FF9. I know that this transmisor only works in 8chs in PPM mode, as it have not available any more channels in this mode.
My question is that if I used this receiver X8R9-L with the module X8F in my Futaba FF9 I could have the 8chs available or on the contrary, if I would have any problem using a receiver of 9chs with my Futaba FF9.
I make this question because my intention would be to change my transmisor in the future by a new transmisor with 9chs in PPM mode.
I need to know if your receiver X8R9-L could receive 8chs working together the module X8F installed in a transmisor Futaba FF9. I know that this transmisor only works in 8chs in PPM mode, as it have not available any more channels in this mode.
My question is that if I used this receiver X8R9-L with the module X8F in my Futaba FF9 I could have the 8chs available or on the contrary, if I would have any problem using a receiver of 9chs with m
Is the 9ch receiver considered a V1 or V2? I've read on RCGroups that the V1 receivers required re-binding each time it was powered up, but the V2 do not. So, with that said, does this 9ch receiver need to re-bind with each power-up?
Leider nicht,alle bekannten 2,4GHz-Systeme arbeiten nur mit Systemeigenen Empfängern zusammen.Also ASSAN Sendermodul mit ASSAN Emfängern,Futaba Sender oder Sd.Modul mit Futaba Empfängern usw.
No, as mentioned in other replies of these receivers. $pektrum, Futaba FASST 2.4 , corona 2.4 or ASSAN 2.4 only binds there own receivers!
Customer Reviews
Overall Rating
Tan Kim Beng
likes
Value
UNRATED
Quality
UNRATED
27 thumbs up!
Having good faith and confidence in Assan 2.4Ghz system, I installed this RX in my Raptor50 nitro heli. Range test along the beach with clear line of sight saw perfect control even at a distance of more than 1KM. This 9 ch rx is about 50pcnt more expensive than its 7 ch sibling but it is worth the money as I can use the extra ch for battery power input and battery monitor, and there is still spare for other application. With the long antenna, I could fix it clear of the carbon fiber chassis to avoid RF shadowing during flight. Really satisfied and will buy more.
No comments. Reply..
Overall Rating
Stephen Boyd
likes
Value
UNRATED
Quality
UNRATED
9 thumbs up!
Bought 4, installed one in my Giant UCD with moke 2.10. Glitch free, rapid response to nearly 1000 yards or more, using 8 channels with crow. Am ordering 4 more soon, for my gassers. Just wish that they would work for all 9 channels using PCM on 9Z/C radios. Highly recommend for glow engine use, will put out more, once I use them in one of my smaller gassers. 1/3 the price of the Futaba 7or8 channel receivers. Thanks Hobby City (=
Good receiver, binding time is longer than RX6 or 7 but it works perfectly. Installed in my EDF F15.
No comments. Reply..
Overall Rating
Ludoga
374 likes
Value
UNRATED
Quality
UNRATED
3 thumbs up!
I need to know if your receiver X8R9-L could receive 8chs working together the module X8F installed in a transmisor Futaba FF9. I know that this transmisor only works in 8chs in PPM mode, as it have not available any more channels in this mode.
My question is that if I used this receiver X8R9-L with the module X8F in my Futaba FF9 I could have the 8chs available or on the contrary, if I would have any problem using a receiver of 9chs with m
2 comments. Reply..
Overall Rating
Eagle
218 likes
Value
UNRATED
Quality
UNRATED
2 thumbs up!
So far so good. It did not want to bind, but found out the problem the tag on the RX for the servo hook up was upside down fixed it and all is fine
Copyright 2012 Hextronik Limited.
The HobbyKing.com®, OrangeRx, Turnigy, Durafly, nano-tech and other brand logos and names are trademarks of hexTronik Limited.
All rights reserved
.jpg)
