USA warehouse now open. Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
The BMS-376DDG digital series are designed to handle the most demanding applications, including high-end racers, 3D competition airplanes and helicopters, 1/18 scale cars, and glider applications.
The servo will automatically learn the users transmitter pulse timings and lock into the signal every time. The servo also includes a signal buffer in the CPU with fail-safe functionality. The motor is wound with 2PEW thin coated wire for better electrical conductivity and is able to withstand high temperature without degradation.
The servo comes with an accessory package and the universal JR/Hitec "S" Connector which is physically and electrically compatible with all major receiver brands sold worldwide.
1. Carbon+30% POM gear with smooth curvature
2. M9.6 ball bearing (si-oil)
3. High-torque motor with low RF noise (CE certified)
4. Rubber seals for waterproof case
5. Designed for 3D airplane and helicopter, 1/18 car, and glider applications.
6. Futaba compatible 25 tooth output splines
7. Digital motor drive with ultra-square PWM signal
8. Automatic determination of servo center pulse width
9. Fail-Safe function
10. 2PEW coated motor wire for high-temperature use
11. Digital control IC - SOP package with 12bit data transfer
12. MOS-FET motor driver chips that can handle 7A peak loads
13. Useable on 6.0V
Weight: 9.8 grams / 0.41oz
Dimensions: 24.5 x 11.5 x 23 mm / 0.99 x 0.46 x 0.91 inch
Torque At 4.8V: 1.5kg/cm , 21 oz/in
Torque At 6.0V: 1.9kg/cm , 26 oz/in
Speed At 4.8V: 0.11sec / 60 deg at no load
Speed At 6.0V: 0.09sec / 60 deg at no load
Unfortunentally same problem here. Mine worked for only two minutes as a tailservo. First it started moving slow in one direction and then it went totally dead! Must be something wrong with this batch. Because I bought 3pcs of BMS-375DMG and they work flawless.
I ordered one for my HK450 and it is the same problem. Not center! Jitter! I tested this connecter to Rudder channel of AR6100 plus NiCd Battery Spektrum. No Gyro or ESC used on test. This batch = trash. I ordered 1 MKS DS480.
-
Comprei 1 para o meu HK450 e ele não funciona nem a pau!!! Não centra. Fica se mexendo mesmo sem comando. Joguei dinheiro fora! Para mandar para troca fica o preço de outro.
Compre um MKS DS480.
No comments. Reply..
Overall Rating
gizmatron
22 likes
Value
UNRATED
Quality
UNRATED
7 thumbs up!
WELL SEEMS I SHOULD HAVE READ THE REVIEWS ABOUT THIS SERVO BEFORE ORDERING IT! I DIDN'T EVEN GET THROUGH THE FIRST STAGE OF MY GYRO QUICK SET UP ROUTINE BEFORE IT STARTED JITTERING LIKE CRAZY AND ALMOST RUINED MY $150 GYRO..NOW IT'S JUST DEAD..forgot to change to no stars first time
1 comment. Reply..
Overall Rating
rcguy09
13 likes
Value
UNRATED
Quality
UNRATED
6 thumbs up!
We ordered 5 of the BMS-376DDG Digital Tail Servo, we have tested 2 of them so with a servo tester, they make suprisingly loud rattling noise at first, got really hot, then went dead, another one just jitter like crazy and will not move, we don't even want to test the other 3, returning all 5 back for inspection. How can these be "tail lock servo" as when they can't even withstand minimal testing? On the other hand we have very positive result for BMS-375DD using as tail lock servo, which lead us to believe that these are defective.
No comments. Reply..
Overall Rating
Mullerhawk
19 likes
Value
UNRATED
Quality
UNRATED
5 thumbs up!
Unfortunentally same problem here. Mine worked for only two minutes as a tailservo for my T-Rex 450. First it started moving slow in one direction and then it went totally dead and locked up totally! Must be something wrong with this batch. Because I bought 3pcs of BMS-375DMG and they work flawless.
No comments. Reply..
Overall Rating
Customer
20 likes
Value
UNRATED
Quality
UNRATED
5 thumbs up!
Nichtbrauchbar!!!!! Bereits beim auspacken schon defekt gewesen und das Gertriebe taugt wirklich nichts!!
Copyright 2012 Hextronik Limited.
The HobbyKing.com®, OrangeRx, Turnigy, Durafly, nano-tech and other brand logos and names are trademarks of hexTronik Limited.
All rights reserved
.jpg)
.jpg){kind=small}
