USA warehouse now open. Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
Si te fijas en los comentarios, es un motor que no da los kv que indica en la etiqueta. Creo que seria mejor que buscaras otra opció*n y encima las encontraras má*s econó*micas. Para que lo piesas usar?
Buenas, si por precio te encaja, esas opciones son muy buenas. Estos motores valen menos de la mitad de los que hablas y en estos tiempos y como prueba, son una buena salida. Dependerá* de cada modelo, los 8.5T no tienen las mismas kv pero parecidas. Para offroad 4wd unos 8.5T está* bien, sobre unos 5.000 a 6.000kv... Saludos
Yes you can. The velineon has no limit turn motor, but in case, this 5.300kv on 3s should be about 60.000rpm, and it isn't as much for the velineon. But if you are planning to use on sc I would be thinking on a 550 can trackstar. Hope helps
Hi this one 8.5 can be used in the 2 class 2 and 4 WD. 8.5 in the 2WD (for me it's 20ie in the european championship). For the 4WD in the slippery track and short track it is possible.
Hello it is with an inbuild sensor. But you can use this also without sensor. The run with sensor gives you a better and various timing during the run.
Is there anybody Traxxas Slash/Stampede owner tried this motor?Will it run nicely with stock gears?? I'm really happy if someone tells about how it works with those cars.
Tested: 2 cell free 3800kv 28,100 rpm 3 cell free 3800kv 40,000 rpm NOT timming adjustable 2 pole strong magnets This motor will be good for 1/10 scale off road. It has alot of torque. Runs warm. Comes with turnigy labeling "mach 1" Timming seems to be set around zerow degrees.
James... 3650 would actually be the can size. (3650 is a standard 550 size can) The specs are clearly incorrect as the timming is not adjustable and the kv rating is completely wrong.
Olaf the first Novak brushless came without cooling fins and they still perform up to today. You can also add a heatsink with or without a fan to this motor. At 37 bucks you can't have a better deal.
I currently run this in a drift car so at high revs, so it will get warm but never hot, and far cooler than most other motors i have run. 3 months in and still no problems at all with it.
Judging from the picture if you look at the back of the motor you will see a plug for a harness the other end is supposed to connect to the esc. It seems this is designed to work with a sensored esc. Does the motor come with a harness? If so what esc will accept the plug from the motor harness. Come on HK we need more information.
this does work with a sensored esc and it comes with a sensor lead. Im using a turnigy 100A trackstar sensored, with it in my drift car and they seem to work perfectly.
60 would be a minimum really, Im running the 100A turnigyv trackstar, and it runs perfectly
Customer Reviews
Overall Rating
George
23 likes
Value
UNRATED
Quality
UNRATED
15 thumbs up!
Good quality motor,i connected with power Evil esc sensored technology,it worked perfectly.Motor is realy good especially for the money.
No comments. Reply..
Overall Rating
boss-fet
119 likes
Value
UNRATED
Quality
UNRATED
4 thumbs up!
Tested: 2 cell free 3800kv 28,100 rpm 3 cell free 3800kv 40,000 rpm NOT timming adjustable 2 pole strong magnets This motor will be good for 1/10 scale off road. It has alot of torque. Runs warm. Comes with turnigy labeling "mach 1" Timming seems to be set around zerow degrees.
No comments. Reply..
Overall Rating
BradleyDAvis
31 likes
Value
UNRATED
Quality
UNRATED
4 thumbs up!
I have brought 2 of these motors for my traxxas bandit and have destroyed both of them. They run well, but they run hot and then dont run at all. My brother has one for his evader, and has had it for awhile with no problems apart for bearings. But then again he only drives SLOWLYYYYYY.
2 comments. Reply..
Overall Rating
Micho69
177 likes
Value
UNRATED
Quality
UNRATED
2 thumbs up!
Better is us motor whit 5 mm shaft and mor that 170 g weight.540 size/KD36-50-07/KD35-50-08/or KD36-60-..More faster. Afraid exist affect tires what able to bring the torque this motors to the street, no chance.Another problem is a Pinion gear whit hole 5mm.Not exist buy :( I need modul 0,5. After I buy motor KD36-60..
No comments. Reply..
Overall Rating
mzievinger
16 likes
Value
UNRATED
Quality
UNRATED
1 thumbs up!
Good, fast looking motor, Perfomance is rather lacking, They say its an 8.5T but it runs like a 11T motor. The EZ-RUN 9T motor has way more power than this motor. It should be categorized as a mild motor, HK should relabel these motors for what their absolute power output is
Copyright 2012 Hextronik Limited.
The HobbyKing.com®, OrangeRx, Turnigy, Durafly, nano-tech and other brand logos and names are trademarks of hexTronik Limited.
All rights reserved
.jpg){kind=small}
