USA warehouse now open. Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
BMS-862DMAX+HS Champion Digital Servo (MG) 18.8kg / .15sec / 54g
BMS-862DMAX+HS Champion High Performance Digital Servo (Metal Gear) 18.8kg / .15sec / 54g
Comes with the following features;
Curve gear with smooth
Double ball bearing (Si-oil)
3 pole strong torque of motor with low signal affect and success get CE certification
Rubber fitting case for water proof
Heavy duty servo case
Middle of heat sink
Design by digital signal with 100% fitting square PWS
Automatic measures central ms
ALU 6061 material of metal gear with light C95 material for light and strong enough
Digital IC (SOP package with 12bits transfer data)
MOS-FET driver (spirited driver able to push over 7A power)
Weight: 54g / 1.84oz
Dimensions: 40.5 x 20 x 37mm / 1.60" x 0.78" x 1.52"
Torque At 4.8V: 18.8kg/cm , 258 oz/in
Torque At 6.0V: 21.2kg/cm , 292 oz/in
Speed At 4.8V: 0.15 sec / 60° at no load
Speed At 6.0V: 0.12 sec / 60° at no load
Seems pretty expensive for an aluminum-geared servo. For that price you're starting to get into the bottom end of the titanium market.
And the choice of aluminum alloy is odd. 2024 or 7075 would have been a *much* better alloy for the gears, 6061 is comparatively soft and will wear more quickly.
They are the best servos I ever had in my hands. The torque is already impressive on 4.8V, it will be even better with 6 V. Good value for money when you want to have something reliable on giant planes.
No comments. Reply..
Overall Rating
lolipop202
95 likes
Value
UNRATED
Quality
UNRATED
Like it?
Here is a fast and strong servo that seems to promise a good functioning see here below the link to the video from the test i made on this servo the push pull wire is not even correctly tightened and the middle position is already very good, no noise and no delay for centering, please watch this www.link
No comments. Reply..
Overall Rating
lolipop202
95 likes
Value
UNRATED
Quality
UNRATED
Like it?
Petite video du fonctionnement de ce servo sur une drive d'avion classe 50 cc essence, vitesse et prcision sont bien prsentes durant ce test ralis sous 6 volts, TX/RX futaba 2.4
Go see this video about the way this servo works on a 50cc gasser's rudder withpush pull wire, a real high efficiency giants scale's www.link
No comments. Reply..
Overall Rating
lolipop202
95 likes
Value
UNRATED
Quality
UNRATED
Like it?
this servo appear to be powerful !
made a test under 6 volt on giant gasser scale plane rudder standalone setup
here is a view on "the way it works in this www.link centering, low noise
No comments. Reply..
Overall Rating
NAWAF
18 likes
Value
Quality
Like it?
This servo can't be beat by performance or price ! , i installed a lot of these servos on a three giant planes, ( Hangar 9 Beast-hangar 9 sukhoi 3.1m-aeroworks 150cc yak) so far they works great. Fast, and centering well.
Copyright 2012 Hextronik Limited.
The HobbyKing.com®, OrangeRx, Turnigy, Durafly, nano-tech and other brand logos and names are trademarks of hexTronik Limited.
All rights reserved
