X8 R6M 6Ch Micro 2.4GHz Receiver (Short Antenna)

Item found in the following categories;
> Radios & Receivers > All Receivers
> Radios & Receivers > 2.4Ghz Assan

RATED:


	X8 R6M 6Ch Micro 2.4GHz Receiver (Short Antenna)

X8 R6M 6Ch Micro 2.4GHz Receiver (Short Antenna)

2.4GHz receiver for Assan X8 systems.
Compatible with all X8 transmitters.

Size: 43 X 20 X 7mm (1.77 X 0.78 X 0.27 inch)
Weight: 4.5g

Key Features
-Highly secure and robust link
-No crystals or channels needed
-No interferance from motors, ignitions or metal to metal friction.
-Short antenna
-No need to change any settings on your radio.
-Works with all X8 systems.

PRODUCT ID: X8R6M-S

This product available from a warehouse near you!

25g

10+

$20.40

Further discounts available for registered & logged-in customers.

Customer rated

5183
crowns

Total of 22 discussions.

ALVARO

5 points - 5/27/2013

No consigo sincronizar este receptor con mi Futaba ff7 y modulo Assan 8X 2.4, Con otros receptores Assan no he tenido problema, pero este parece que no recibe las señ*ales de la emisora al hacer el binding. ¿*hay algun truco ó* algo diferente con este receptor? Gracias a quien sepa contestar

pipo2000

10 points - 3/9/2013

no questa RX e tutte quelle Assan ,funzionano solo con modulo Assan

Pakillus

3 points - 2/18/2013

It is compatible with wfly 8ch transmiter and kds 8xr TX ? Exactly it is the 8xtf 2.4 Module

pipo2000

10 points

no questa RX e tutte quelle Assan ,funzionano solo con modulo Assan

Pakillus

3 points - 2/18/2013

Exactly it is the module KDS 8xtf 2,4

Pakillus

3 points - 2/15/2013

It is compatible with wfly 8ch transmiter and kds 8x ?

sefefra

359 points - 6/4/2012

funciona este receptor con la radio KDS de 7 modelo nuevo canales??

Jvmodelismo

14 points

Este receptor es compatible únicamente con el módulo Assan y el radio no tiene este módulo

ALVARO

5 points

He comprado este receptor pero no consigo sintonizarlo con mi emisora. Una Futaba ff7 con el mó*dulo de 8X 2.4 Assan. Con otros receptores Assan no he tenido problema, pero este no hay manera. Hay que hacer algo diferente??? gracias.

nickie1978

4 points - 4/25/2012

somebody tried this receiver with 6V ???

Jiri

123 points

Works fine for less than 4V as well as 6V (5xNiCd pack). But I did not try, what voltage will destroy it :-)

BEST ANSWER CREDIT AWARDED

nickie1978

4 points

Thanks www.link

__frog

9 points - 11/30/2011

Hi, I want to give a credit to Arkadiy, but I don't know how!!!

GRAHAM

168 points - 11/9/2011

Is this the same as the 'Planet R6M' in my CPGOLD helicopter? Sure looks it. Yet to buy the module. Moved on from CP GOLD now.

chikut

20 points - 9/14/2011

is this RX compatible with Turnigy 9X 9Ch Transmitter? http://www.hobbyking.com/hobbyking/stor
e/uh_viewitem.asp?idproduct=8992

Nico123

51 points

no, this receiver is only compatible whith the transmitters from Assan X8 series.

paulzzr1200

60 points

I do not think so. I have a JR pro 8103 with the assian modual. need to use an Assian system

mikael

3 points

tout les recepteur assan sont compatible avec le module assan x8

kuryaky

52 points

yes but you have to purchase this module. you have to purchase a www.link

Walter

11 points - 6/27/2011

Is this receiver compatible with the Turnigy TX-9X-M2 transmitter?
(http://www.hobbyking.com/hobbyking/
store/uh_viewItem.asp?idProduct=8992)

ysnr36

32 points

No ! It's for ASSAN transmitter only.

ed 144

34 points

Hallo oly with assan
i put the assankit in the turnighy and works bethet
it is very good inveslment.
Works stable and no noise on the servos

greeting Ed144

richter

11 points

No, this only works with the receiver of the Assan module, you can turn it on, getting the module in a Futaba, JR only.

Alexandre

7 points - 6/13/2011

Any test with composite fuselages (DLG)?

frank fv

50 points

It is not the ame for this receiver, use long antenna. Frank

vasy1

607 points

Better to get longer antenna to stick outside the case.

Daniel

9 points

Perfect Reciever! very well! :)

arnaldo

94 points - 5/15/2011

has it ppm sum on ch 6?

CHUS3

7 points

All channels work great. I use channel 6 to the left aileron (2 servo for ailerons) and Flaperon mix. PPM work mode for the Tx module that only works if the transmitter is in PPM mode. Tx working on a proprietary modulation Assan.

Orestes

7 points

`Hi, I bought 6 unit this one, all receivers work very well, the range is about 1Km, without interference, I flight 3 years without problems!

quesnes

154 points

No ppm sum, you need additional card for that.

Hixxbo

32 points

Yes, it should ! See the www.link

Hixxbo

32 points

As it is impossible writing links here ... see the post #5460 of the thread X8**-new 2.4GHz Radio System on RCGroups forum !

Sandel

14 points

YES, in fact it's X8R6MP, and you can configure it to feed raw PPM on 6ch output: during binding unplug the jumper after first series of blinks, keeping powered. HOWEVER, it has glitch in output PPM sequence where it shouldn't be. This confuses most sim adapters, so don't consider it for wireless sim solutions.

Miroslav

8 points - 11/17/2010

Is functionaly with Spectrum TX ?

magnusEl

1238 points

No, it only works with Assan module.

Frank

15 points

This receiver is not for Spectrum Transmitters for spectrum look at $pektrum catagory.

Papy Solex

10 points

Hi, This reciever works only with the Assan transmitter module.
Good flights

bigron

9 points

No, they are two different types of signals. Assan will only work with assan transmit module.

Polleke

14 points

No, Spectrum has another kind of modulating

MARCURRI

11 points

NO, only ASSAN system

plasticbaldy

376 points - 8/11/2010

Does it work with the Turnigy 9Ch 2.4 V2 Tx ?

Ramir

715 points

Yes, but you must change Turnigy Tx module for for ASSAN Tx module.

QuadFinger

196 points

Only works with Assan TX and TX modules.

tikka88

14 points

so, would it work with an assan module in turnigy 9x??????

QuadFinger

196 points

tikka88, it WILL work with the Assan module in the Turnigy 9, or Futaba or anything else you can solder/plug the module into since it's the module that transmits the data. ( I use an Assan "hack" module in a Futaba T7CAP, hope that helps.

tikka88

14 points

that clears thing up a bit. thnx =)

nemo4all

35 points - 8/6/2010

How does this receiver differ from the 6 channel normal big receiver...?? Is there any rang difference or there is difference in the siglan outputs for the servos...??

warthog

414 points

The only differences are the size and weight.

chuckstarck

25 points

www.link can get the answers to all those specs on that page.

Craig

10 points - 8/1/2010

****

ycellette

32 points

assan rx bind only with assan tx like all others rx/tx you have to keep the same brand for rx and tx

Ramir

715 points

****

Eric1180

2281 points - 3/21/2010

does this have the same range as the normal 6ch

Ramir

715 points

Yes, my experience is that the same as stanadard with the short antena.

BEST ANSWER CREDIT AWARDED

aerofly

77 points

a great little receiver, fitted to both my HK 250GT and HK 500GT, HK should be selling all of Assan products they are good value for your money

Ramir

715 points

I dont have seen any difference.

jtfdez

32 points

I used this rx in many foamys and in a 450 helicopter and never had a problem. always flyng in a range of 300 mtrs.

claser

21 points

This kind of RX is for use in park flyer. The range is shorter than a normal 6 ch.

tomtebrolet

24 points - 3/13/2010

Out of stock for 5 weeks now!
When is it expected to arrive?
Is it expected to arrive?

donaldrtaylor

40 points - 11/19/2009

Nov. 18,2009HC has been out of stock for over two weeks, maybe more. When is the next shipment expected?

garytcl

62 points - 11/17/2009

HK should included the binding plug.

magnusEl

1238 points

I dont think you can blame HK for that. It is Assan that should include it in the package.

But if you have buy a Assan module (combo or hackmodule) the bindplug is included, why would you need moore?

Eric1180

2281 points - 7/2/2009

Is this to small to use for a nitro .20 Sig wonder. It is a very fast but small (36in) plane.

yonas

8 points

it works up to 300m,so i don't really now but it can works if you don't fly to far :) but its safer to take a reciever up to 500-600m

Customer Reviews

Create an account

Overall Rating		Saurabh 19599 likes
Value	UNRATED
Quality	UNRATED

123 thumbs up!

Superb performance. Full range receiver, though advertised and park plyer, it has more than 500 m range... good for small planes and foamies. I have been using it for the last 1 month. No glitches and perfect for my yak 54 30 inch model.

No comments. Reply..

Overall Rating		Magic69 78 likes
Value	UNRATED
Quality	UNRATED

12 thumbs up!

These are fantastic. After Hacking my Jr TX with the hack module, these receivers offer a good compromise of light weight and enough channels to suit most park flyer needs. And with the great Assan glitch free reliability. Will buy more.

No comments. Reply..

Create an account

Overall Rating		pereira61 58 likes
Value	UNRATED
Quality	UNRATED

8 thumbs up!

Same system as 4 channel one. Great size. Range 300m minimum, working at 4V!!!

No comments. Reply..

Overall Rating		Knimrod 45 likes
Value	UNRATED
Quality	UNRATED

5 thumbs up!

These RXs are fantastic! Excellent range and reliability with a super light weight. Glitch free performance and a super bargain. I can fly farther than I can see with these with confidence.

I'm on my 6th Assan receiver now..

No comments. Reply..

Create an account

Overall Rating		playful 60 likes
Value	UNRATED
Quality	UNRATED

4 thumbs up!

The only receivers I use now. Flawless no-glitch performance on a Multiplex Acromaster and Potenski UZI XXL. Also very useful on a GWS Slow Stick with multiple LED-powering circuits which used to glitch on 72MHz due to the great deal of electromagnetic interference generated by the DC-DC driver boards.

No comments. Reply..

.....click here to see all reviews