HobbyKing Pitts EPP-CF w/ Brushless outrunner (DE Warehouse)

 everytec 13 points

definitively. Mine goes really like a rocket with a 3s 1300mAh zippy. Use a 2 Servo aileron configuration - i dont see how two servos will work. I used HXT500s and am fine, doing 3D Flight with a 10x4.7 APC Prop

 edimp1 11 points

hi, well, it flyes great but without wind. i also fly it with 2s but for indoor or no wind situation.
with 3s and no wind is flying very good, but vertical climbing is not so great.... he do it but... if you have something more powerfull is always better.. jeje

 Moosi 26 points

Also ich flieg 3S 1300mAh und Serienmotor wie Latte (8x4). Einen Start senkrecht aus der Hand hab ich noch nicht versucht, aber aus dem Flug raus geht er schon senkrecht. Nicht wie ne Rakete aber er schaffts. Ich werd jetzt mal eine 9x5 testen, denk da geht's dann aber ohne Probleme. Allerdings wird mein Akku nicht mehr so lange halten. Ich bin begeistert von der Pitts.

 Moosi 26 points

Mittlerweile hat meine Pitts schon einiges auf dem Buckel. Fliegt aber immernoch hervorragend. Gewicht mittlerweile ü*ber 600g mit 1300mah 3s Lipo. Flieg jetzt mit GWS 8x6 Prop und bin mit der Leistung super zufrieden. Hab das Model nochmal bestellt, da es jetzt langsam zu Ermü*dungsbrü*chen kommt und es dadurch noch schwerer wird. Es war mein Lern- und Ü*bungsflugzeug und ich nutze es auch mit kleiner Cam. Musste schon einiges einstecken und ich will jetzt mal wieder eine "frische" Pitts.

 H-KING_SCOTT 5161 points

I will request a .pdf manual from the supplier and update the files soon.

 H-KING_SCOTT 5161 points

Manual has not been uploaded :)

 dijon6 5 points

thanks very much, this was a great step to finish the flyer. best regards from cologne/germany

 Rcforme 210 points

See 'Files-Manual'. Hope this helps you!

 H-KING_SCOTT 5161 points

Which colours would you prefer?

 H-KING_SCOTT 5161 points

Please let us know.

 Fugitive_Bill 419 points

I would like to see the 'standard' Pitts Special colours of RED, WHITE and Blue.

 Electric Power 466 points

Jason5001
Bright colours and **different** tops and bottoms. I find it is hard to see ( eyes OK) in different conditions what a plane is doing. I know with newer pilots they tend to drift further away from the field. Even an option of a bright decal a pilot could apply then remove at a later time. Foam I know you have to keep light. I had a Coota ( had key word) I painted the underside so it would show up better. Blue/ white plane against a blue white sky doesn't work for me.
PS change the Coota to a better foam add some colour and I would buy it again even for a few bucks more. I liked the plane but now it is a parts bag.

 nenno 122 points

There was no manual included. Can someone please upload the manual?? Thanks...

 PieroNicastro 15 points

I Have bought it from German warehouse. As other people wrote before me, there are no instructions. Foam is worked in a not so good way, I mean they just use a marker to indicate the place where you will have to cut or glue... The fuselage was not straight, I have had to warm it up and let it be straight. Flaps need a 3 Kg servo because of the hard work it is required to move them...
In the end I can tell that it can be a very nice model for someone who REALLY knows how to make a model from some foam. Price too high for the quality it is made of. Wish I could buy a better model net time...

 fly by wire 38 points

I've also ordered this Non Manual Included Model. I guess the guy who cut out the foam was not in a good mood! Body of my model is out of shape and bended. The wings are ok. Everything is included. But to be honest: The colour is sooooo ugly. Thanks God: I know a trick to make it nice. Manuel is not necessary, but would be a nice to have.. Hopefully I'll find soonest time to build up and remove the yellow shame painting!