Turnigy nano-tech 4500mah 10S 45~90C Lipo Pack

Item found in the following categories;
> Batteries & Accessories > Li-Poly (All brands)
> Batteries & Accessories > 45C Discharge
> Batteries & Accessories > Turnigy nano-tech

RATED:


	Turnigy nano-tech 4500mah 10S 45~90C Lipo Pack

Turnigy nano-tech 4500mah 10S 45~90C Lipo Pack

More than just a fancy name. TURNIGY nano-tech lithium polymer batteries are built with an LiCo nano-technology substrate complex greatly improving power transfer making the oxidation/reduction reaction more efficient, this helps electrons pass more freely from anode to cathode with less internal impedance.

In short; less voltage sag and a higher discharge rate than a similar density lithium polymer (non nano-tech) battery.

For those that love graphs, it means a straighter, longer curve. For pilots it spells stronger throttle punches and unreal straight-up performance.
Excellent news for 3D pilots!

Unfortunately with other big brands; numbers, ratings and graphs can be fudged. Rest assured, TURNIGY nano-techs are the real deal, delivering unparalleled performance!

Spec.
Capacity: 4500mAh
Voltage: 10S1P / 10S Cell / 37V
Discharge: 45C Constant / 90C Burst
Weight: 1264g (including wire, plug & case)
Dimensions: 300x54x40mm
Balance Plug: JST-XH
Discharge Plug: 5.5mm Bullet-connector

Suited to the following models: MIKADO LOGO600/600SE, MA Furion 6, Joker 3

The nano-core technology in lithium ion batteries is the application of nanometer conductive additives.

1) The nanometer conductive additives form ultrastrong electron-conducting networks in the electrodes which can increase electronic conductivity.
2) These additives create a superstrong ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion.
Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.

Advantages over traditional Lipo batteries:
-Power density reaches 7.5 kw/kg.
-Less Voltage sag during high rate discharge, giving more power under load.
-Internal impedance can reach as low as 1.2mΩ compared to that of 3mΩ of a standard Lipoly.
-Greater thermal control, pack usually doesnt exceed 60degC
-Thickness swelling during heavy load doesnt exceed 5%, compared to 15% of a normal Lipoly during heavy load.
-Higher capacity during heavy discharge. More than 90% at 100% C rate.
-Fast charge capable, up to 15C on some batteries.
-Longer Cycle Life, almost double that of standard lipoly technology.

PRODUCT ID: N4500.10S.45

This product available from a warehouse near you!

Capacity(mAh)	4500
Config(s)	10
Discharge(c)	45
Weight(g)	1264
Max Charge Rate (C)	10
Length-A(mm)	300
Height-B(mm)	54
Width-C(mm)	40

Update/Add my own data
Customer Data

1405g

10+

$146.72

Further discounts available for registered & logged-in customers.

Customer rated

5 crowns

Total of 2 discussions.

Buzzlightyear71

9 points - 1/26/2012

Can someone please tell me, do you connect the two short wires together to get your series connection?

Dominik

7 points

Hi Buzzlightyear71, Yes, you have to connect the two short wires. They exist, because you can send only 5s connected together by plane.

BEST ANSWER CREDIT AWARDED

Buzzlightyear71

9 points

Thanks Dom, i gathered as much, but just wanted to check.

wayne

3 points - 8/22/2011

Seriously.. What would this be used for? could someone advise?

Dominik

7 points

for powering electric helicopters/aeroplanes!

Dominik

7 points

I am using this battery at the moment for powering my LOGO 600SE. It offers flight times of more than 8min. The power it offers is off the scale. Just a great battery!!!

Customer Reviews

Overall Rating		Dominik 7 likes
Value
Quality

Like it?

A great power plant for R/C-Helicopters like the LOGO 600SE or the T-Rex 700. Flight times of more than 8min.

1 comment. Reply..

.....click here to see all reviews