Please confirm your location:

USA warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
  Item found in the following categories;
> Chargers & Accessories > Battery Charger (DC only)


Turnigy Accucel-6 50W 6A Balancer/Charger w/ Accessories (US Warehouse)

Turnigy Accucel-6 50W 6A Balancer/Charger w/ Accessories  (US Warehouse)

The Turnigy Accucel 6 Balance Charger utilises quality FET's and resistors to accurately balance and charge LiPoly and NiMH batteries.
The Accucel-6 will handle LiPoly/LiFe up to 6S and NiMH/NiCd up to 15S and shows individual cell voltage during charge with realtime updates throughout the charge cycle.
The intuitive menu system means charging and cycling is an easy process and can be done quickly and accurately either at the field by using a 12v input such as a car battery or at home with a 12v power supply.
Bundled with the Accucel-6 is a bunch of input and output wires which should satisfy any charging requirement.

There are several chargers now entering the China market that look similar to the Accucel. These chargers are produced with cheaper FET's and are unfortunately much less accurate and very unsafe. There has been reports of the copied chargers over-charging packs and not balancing correctly.
The Accucel-6 is the first charger in the market with this PCB layout Circuit design. Any charger with the same circuit diagram is most definitely a copy. We have tested the copied chargers ourselves, their componentry is of a very low quality and the manufacturing company that has produced the copy has used a process of duplicating our CPU(MCU)'s hex file and flashed a similar chip(MCU) to produce a similar product. This means they do not have the original code and therefore cannot bug-test(QC) or update the charger at any point.
Our chargers have CE and RoHS certification, proving their safety.
Plus, thousands of customers the world over have used our chargers with excellent results.
Your batteries are expensive. We understand this and thats why we will not carry low-quality charging devices.
Trust only in TURNIGY® quality charging devices.

• Microprocessor controlled
• Delta-peak sensitivity (NiMH/NiCd)
• Individual cell balancing
• Li-ion, LiPoly and LiFe capable
• Ni-Cd and NiMH capable
• Large range of charge currents
• Store function, allows safe storage current
• Time limit function
• Input voltage monitoring. (Protects car batteries at the field)
• Data storage (Store up to 5 packs in memory)
• Battery break in and cycling.

Input Voltage: 11~17v
Circuit Power: Max Charge: 50W / Max Discharge: 5W
Charge Current Range: .1~6.0A
NiMH/NiCd Cells: 1~15
LiIon/LiPoly Cells: 1~6
Pb battery Voltage: 2~20v
Weight: 355g

This charger has a JST-XH charge plug, which makes it compatible with Zippy, HXT, TURNIGY and any pack with a JST-XH adapter.

Note: Power supply not included.


Weight: 437g
USA West Warehouse
International Warehouse In Stock View Item
Price $24.10

  • HobbyKing 350w 25A Power Supply (100v~120v) (USA Warehouse)

    Combo Price: $41.53   BACKORDER

  • Hobbyking Parallel charging Board for 6 packs 2~6S (XT-60) (USA Warehouse)

    Combo Price: $9.16   IN STOCK

  • Parallel Charging Board for 6 packs 2~6S (Bare Leads) (USA warehouse)

    Combo Price: $7.16   IN STOCK

  • Hobbyking PowerStrip - Fuse Protected Power Distribution Board (USA Warehouse)

    Combo Price: $13.16   IN STOCK

  • XT-60 to JST Charging Adapter (2pc)

    Combo Price: $1.91   IN STOCK

Further discounts available for registered & logged-in customers.
 Customer rated
Total of 262 discussions.
Joshua  1 points - 10/25/2014
No it is only rated for up to 17V input
Keith  1 points - 10/24/2014
Will a 65W AC adapter work for the accucel 6 ? Input:100-240v~50-60Hz 1.5A Output: 19.5V=3.34A Its from a dell laptop Thanks !
 Keith 1 points
Nevermind sorry, I see this asked earlier and someone replied, NO, they wouldnt recommend it ! Sorry for the same question !
Curzon  1 points - 10/9/2014
I would like to use this charger for 1S 350mAh Li-Po's. How many single cell Li-Po's can I charge at the same time? Do I have to buy anything in addition to the power supply? (Parallel charging boards?) Thx
 JanComputerman 15 points
If you can find a parallel board with the same battery connectors as your small lipos then yes but making up a cable with bananas on one end for the charger and parallel connectors on the other would be another choice if you are handy with a soldering iron. Just be careful when connecting the batteries in parallel that they are close to the same charge level or else you will have some current flowing between the higher and lower cells. If you build your own cable you can use lighter gauge wire to limit the cross current flows in this situation.
Cory  1 points - 10/4/2014
I'm having a bit of trouble finding a decent power supply for a good price. Not sure if it's because of everything it specifically needs or I'm not looking well enough. Someone think they can point me in the right direction please?
 Freeman 7 points
I use the Hobbyking 60w power supply and it does the job and its 10 bucks.
 JanComputerman 15 points
I got the same power adapter last year and it often browns out under load so I would recommend the 15 volt 5 amp for a little less money ... Not sure why it's less ... Or the 15v 7amp 105watt for a few dollars more.
 Jordan 1 points
I personally use a computer power supply to feed 12 volts. It works great because you get a great price and its easy to get going. It also offers more than one voltage at once if that interests you.
Joe  1 points - 9/28/2014
Can I use a laptop power supply with this charger, 19v output?
 Wireball 1 points
I wouldn't recommend it - the rated input voltage range is 11-17V. It might be within tolerances, but one would be pushing it 12% beyond its rated max input voltage.
Customer Reviews
Overall Rating
Like it?
I have this charger and use it to balance charge all my Lipo and Life batteries, love it! It works well and you can monitor the balance as well as the charge and charge rate of the unit, works just like it should, the menu takes a little getting used to, but so do many of the fancier toys we all use. I would recommend this unit to anyone who wants a fairly priced balance charger with lots of features. I have used it for a while and am very happy with this charger.

18 comments. Reply..

Overall Rating
Like it?
Another great product! Charges and balances my LiPo's so much better than the stock chargers that came with my helis. Runs quiet and easy to use.

No comments. Reply..

Overall Rating
Like it?
Love this charger. Well made , Bright backlit readout , easy to program . Can't touch a charger like this in the USA for under $60. Bought it because my Shultz isl 330-6 ($200) needed a new e-prom chip to update to LiFe charge and would not charge below 300ma for micro stuff.. The e-prom was on backorder and it was $30. A no brainer !!!!
Like this one better anyway with balance connectors on the side so you can charge and balance at the same time. You GO Hobby King!!!

3 comments. Reply..

Overall Rating
Like it?
Awesome product!! Easy to use quality charger. I have 2 now and for the price will probably end up with 2 more. Does everything I need and more.

No comments. Reply..

Overall Rating
Like it?
this product is great charging 40c 5000mah 2s batteries...but this item has been out of stock for MORE than 30 days (HK lied about the updated frequently)

No comments. Reply.. here to see all reviews
Aff. Link