USA warehouse now open. Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the US warehouse even better value!
Turnigy Typhoon 500H Heli Motor 1800kv (500 Class) (AUS Warehouse)
The Turnigy Typhoon is a very serious upgrade for any 500 size heli. Tight copper wire turns with high pressure pressed laminations make this motor very efficient and powerful. Users will notice the instant power increase and higher idle speed when using this motor & we suggest you adjust your throttle accordingly.
hi im working on a build listed above is it possible to achieve between 1500 and 2000 rpm with this motor safely if so what pinion will i need. if not is there a motor you could recomend
Hi Luke with a 13 tooth pinion you can get 2400rpm so it will be find if you use a lower the throttle curve or use a 12 tooth pinion aswell
cheers Phil
TOP motor, i use this a couple of rc boats, with a 120amp water cooled esc on 4s. temp was around 40 deg celsius, and with a x4/38 prop was pulling 80kph on gps.
No comments. Reply..
Overall Rating
Johnny66
29 likes
Value
Quality
Like it?
I use this motor in my T-Rex 500 clone through 60A ESC (replaced the HobbyMate 3650 1700Kv motor)! This dropped the temp on the ESC down to 40c from 70c and batteries down to 35c from 50c (no more puffing batteries)! With a 12T pinion it hovers nicely at 2200/2300 rpm on standard 162T gear. Flight time on 2450mA 6s battery is 8 minutes with 10/15 pcnt charge left (Sports flying only). Motor is only warm at 30/35c! This motor PURRS! Will buy another one for my next 500 build!!
Cannot fault this motor, currently running on 6 cells with a Plush 60A ESC in my HK600GT (yep, in a 600 not 500) it has plenty of power for hovering around and training moves
Copyright 2012 Hextronik Limited.
The HobbyKing.com®, OrangeRx, Turnigy, Durafly, nano-tech and other brand logos and names are trademarks of hexTronik Limited.
All rights reserved