There is plenty of rad in the RadJet-420! This brilliant Micro model has no trouble earning the RadJet moniker, with it's combination of ultra-light weight, high power brushless motor, digital servo's and slippery airframe, the Radjet 420 is just so much fun to fly!
The Radjet 420 has been tested and flown to within an inch of its life and it performed flawlessly, a super stable micro that can be ready to fly in just minutes, the Radjet has been constructed from EPS foam for superior flight performance, it's ultra-light flying weight makes the Micro Rad easy to hand-launch and resistant to all but the worst dumb thumb moments. Many models of this size are often limited by linear servos or cheap components, but not the Micro Rad! featuring pre-installed, fully proportional HK-5320 Digital servos, a Turnigy ESC and a specially wound 3000kv brushless motor, the Radjet 420 is a performer. The build quality is just fantastic, fully hinged ailerons are another example of why the Radjet 420 stands out from the crowd. This is a fast model to put together, the motor and ESC are pre-installed, leaving you to glue on the vertical stabilzers with the included glue, then go and fly!
Performance is of course what this model is all about and the Radjet 420 is no slouch! Power is delivered courtesy of the powerful Turnigy Brushless motor running on 2s, for reliability a Turnigy ESC is pre-fitted and the servo/ESC connectors are all compatible with the 4 Channel Orange Micro RX (R415). This model might be cheap to put in the air, but make no mistake, this is one seriously capable model, just make sure you take a handful of Lipoly batteries with you when you go and fly, screaming the Micro Radjet around your local park is addictive!
Features:
Powerful Brushless Outrunner Motor Specifically Wound for the Radjet 420
Hinged Control Surfaces for Reliability and Precision
Perfectly Matched, specially designed Prop
Magnetic Canopy Hatch
All Servos, ESC & Motor Pre-Installed
Bright Color Scheme, Perfect for Orientation
Decals Pre-Applied
Control Horns on Upper Wing for Durability
Glue Included
Can be Assembled in Minutes
Wide Flight Envelope, Aerobatic & Fast with Excellent Slow Speed Handling
Specs:
Wingspan: 420mm
Length: 378mm
Flying Weight: 75g
ESC: 6A w/BEC
Servo: HK-5320 Digital 1.7g x 2
Motor: Specially wound 3000kv Brushless Outrunner
Requires:
Your Own 4 Channel TX/RX with elevon mixing (compatible RX with 1.25mm Molex 3 Pin Connectors)
180mAh 2s Lipoly Battery
PRODUCT ID: 9310000023
This product available from a warehouse near you!
| 
.jpg&width=48)
.jpg&width=48)
.jpg&width=48)
.jpg){kind=small}
