Digital metal gear servo 49g/10.5kg/.19sec

Total of 19 discussions.

forzaferrari

26 points - 5/9/2013

Yes, this servo is a standar size servo. It works really well. High power and torque and high reliable. Of course, take care with the consumption. I am very happy with them in different heli sizes.

Aldrin

9 points - 4/7/2013

Can this servo work well on TZ-V2 .50 Helicopter? Is this reliable enough for that size heli? Been looking for a cheap but reliable servo ( I know that combination won't exist ). Anyone's advice will be greatly appreciated. Thanks for the help.

3Dscalepilot

14 points - 2/28/2013

will these servos work in a aero-works 35% 100cc extra 330?

Ujjwaana

165 points

For throttle, may be. For any of the surface, you must be kidding. You need good 10KG torque Digital Metal gear Servos from a reputed brand (JR/Futaba/Savox/Hitec/Airtronics/mks) on a such a big and costly plane.

BEST ANSWER CREDIT AWARDED

3Dscalepilot

14 points

thanks :)

Tdog1

4 points - 1/13/2013

can I use these servos on a 600 helicopter flybarless? what frenquency do these work?

forzaferrari

26 points

Yes, you can use them in this heli. Take care with the consumption. The frequency is the standar frecuency for a digital servo.

Slamn SAMMY

50 points - 12/14/2012

any one knows who makes theses servo's?

Amaury

230 points

Nô*, completly unknown brand :o

ballbuster

2 points - 12/10/2012

will these work for the hk 550?

Juan Carlos

1 points - 7/9/2012

Do you know if this servos works with Microbeast?

forzaferrari

26 points

Yes, they work perfectly with Microbeast. Yo need to config the servo speed only.

Tdog1

4 points - 12/8/2011

anyone know how many amps this servo uses?

Melchi

30 points

i tried to use them the on a big scale but they weren't powerfull enought for me. but the amps consumation was ok. for all my servos i used 300ma per flight

edmund

1 points - 10/24/2011

can this be used on a 1/10 buggy like b44?

frogs

161 points

It should work fine as the torque rating is higher than standard traxxas servos.

lolind

12 points - 8/24/2011

Czy ten serwomechanizm jest kompatybilny ze zł*ą*czami Futaba ?

pr0fab

440 points

Tak, serwo moż*na ś*miał*o podł*ą*czyć* do odbiornika FUTABA. Serwo jest sterowane przez znormalizowany sygnał* o zmiennym wypeł*nieniu.

BEST ANSWER CREDIT AWARDED

marktheflyer

5 points - 5/10/2011

Does anyone know where I can get the HD-9150MG's????? I have asked Hobby King and they said they have them BUT, they don't show them anywhere....HELP....Thanks, Mark

Melchi

30 points

I don't understand. I have commanded and recieved them last month from china with no problem.

Salasgr

13 points

I think you should search more inside the e-shop :)

Tonio89

7 points

i recommend you this www.link use in a 50cc 3D gas plane and the performance is absolutely stunning, very value

Greenfuelboy

162 points - 3/1/2011

Please comment on the servos performance. I want to buy them, but I am not sure. Have any one had one go bad.

forzaferrari

26 points

They are very good servos. Some friends and me have this servos in some helicopters. They are plenty of power and a smoth work. This servos in a local shop are about 3x the cost in hobbyking.

BEST ANSWER CREDIT AWARDED

Salasgr

13 points

I have bought them and i am very sutisfied of their work condition. I have them on a raptor 50 and also a friend of mine have them on a vision 50.

Justin

6 points

I bought one these servos to use on a ducati moto bike and it seems to work fine for the steering now I am buying one for the thortle and brakes.

Broose27

10 points

Getting a bit worried - says there are 10 in stock, ordered 5 a week ago, and still saying 'processing' - not like HobbyKing at all... Don't think the new ARF will be flying this weekend.

ssn651

14 points - 4/30/2010

i understand this is a standard size servo, which I am looking for, but how many are being sold? The picture shows 5? Or am I just purchasing one (1)?

Straight Up

743 points

You are purchasing ONE. Look at the picture - it shows several of their line-up, but all have different numbers. The 9110 is second from the right.

arpan

12 points - 2/19/2010

This servo can i use for helly?and can i combinate wt gyro futaba 401 and the servo 9254?how about the voltage regulator i use?

__Rman

79 points - 6/9/2009

How dou you programm the servo? Wich servo programm card I have to buy and use?

aero122

48 points

This servo is NOT programmable.
Cheers

EricB

20 points

2010/04/15
So why are they called "DIGITAL"?
My understanding is that when a servo is digital, it means that it can be programmed.

ozione

253 points - 5/28/2009

Are these servos programmable? If so are they compatible to Hitec digital servo programmer HPP-21?

aero122

48 points

See above. Cheers.

telang

115 points - 4/27/2009

Do these servos now come with mounting hardware (grommets and screws etc.)and arms, or is it just the servo?

aero122

48 points

My servos arrived with all mounting hardware. Futaba servo arms can be used. Cheers.

Big Steve H

189 points

If mounting FUTABA arms on these it is a VERY TIGHT fit, almost to damaging the servo. They will fit on hi-tec but arent snug and turn under load,but they fit Futaba just be VERY careful doing so.

Gazzman

15 points -

Can you buy spare gear sets?

Garry

aero122

48 points

You can try to contact Huida (****chd.hk). Cheers.

waynemia

470 points -

there is not mounting hardware or arms? Do you have mounting hardware and horns for them?

aero122

48 points

My servos arrived with all mounting hardware. Cheers.

Customer Reviews

Overall Rating		Henk van Beek likes
Value	UNRATED
Quality	UNRATED

9 thumbs up!

great servo whit a lot of torque,
great starting point!

No comments. Reply..

Overall Rating		Thomas Molnes likes
Value	UNRATED
Quality	UNRATED

7 thumbs up!

A very godd servo. I am uning mine in a 2m vsp Edge 540T. I am also going to have HD in my next model. These servos are just as good as Hitec and Futaba...

No comments. Reply..

Overall Rating		LB likes
Value	UNRATED
Quality	UNRATED

4 thumbs up!

bon servo, idéale pour mettre sur gros model peu de jeu au neutre, bon couple de blocage.
monté sur un pilatus 3m (obectif de réutilisation future sur un plus gros modele).
la conso est normal est largement inférieur à un tower pro.

No comments. Reply..

Overall Rating		aero likes
Value	UNRATED
Quality	UNRATED

4 thumbs up!

very good servos. I have them on a 26cc gasser for a few months. They are strong and fast as claimed. They center very well as well.

No comments. Reply..

Overall Rating		Matt roman likes
Value	UNRATED
Quality	UNRATED

3 thumbs up!

Fast and accurate servo, me likey. No grommets though.

No comments. Reply..

.....click here to see all reviews

Digital metal gear servo 49g/10.5kg/.19sec

Model: HD-9110MG
Voltage: 4.5v~6v
Speed: .19sec
Torque: 10.5kg/cm
Bearings: 2BB
Gears: Metal
Weight: 49g
Size: 40.7x20x39.4mm

PRODUCT ID: HD-9110MG

Futaba/JR Connector caps (5pcs/set)

Digital metal gear servo 49g/10.5kg/.19sec

Model: HD-9110MGVoltage: 4.5v~6vSpeed: .19secTorque: 10.5kg/cmBearings: 2BBGears: MetalWeight: 49gSize: 40.7x20x39.4mm PRODUCT ID: HD-9110MG

Futaba/JR Connector caps (5pcs/set)

Model: HD-9110MG
Voltage: 4.5v~6v
Speed: .19sec
Torque: 10.5kg/cm
Bearings: 2BB
Gears: Metal
Weight: 49g
Size: 40.7x20x39.4mm

PRODUCT ID: HD-9110MG