SCM 3223 1550kv Brushless Outrunner

Total of 4 discussions.

Den Yusuf

17 points - 3/7/2013

Can this motor using three blade propeller 8x6? Can this motor I apply to rc plane with heavy 900gr?

max

2 points - 7/25/2012

i know this is going to sound crazy but will this fit in 1/18 scale vehicle im building a custom tank and need to know

Aleksandr

1 points - 6/9/2012

What trust in grams it has on 3S with different props?

zaskarkid

343 points -

does it have the typical 28mm 4 bolt pattern for threaded prop adaptor & spinner OR do you have to use a collet adaptor?

Kellyann

16226 points

zaskarkid you can fit one but it does not come with it you have to buy it as an extra. Sorry. I come with a prop saver as you can see!

omerhan

2 points

this is good motor. 900gr trust with 9x4.7 sf prop 40a esc 3s 2200mAh 35c lipo. i use it on my 100cm zagi. unlimited vertical fly :)

Customer Reviews

Overall Rating		Filip Krajcovic likes
Value	UNRATED
Quality	UNRATED

10 thumbs up!

This motor is wery good for small aircombat 850mm wing span and weight 345g. Motor is very light and powerful. Prop. 8x6 GWS HD (about 13A) or 8x4 (about 10,5A) GWS HD. I use it with battery LM 1300mAh and Hextronik 18A speed controller or Ormc 18A.

No comments. Reply..

Overall Rating		Rolf Straller likes
Value	UNRATED
Quality	UNRATED

9 thumbs up!

I use the Motor with a Graupner Slow Fly Prop 8x4,5
2 Lipo: 7000 rpm 8,3A
3 Lipo: 8500 rpm 15 A

Dont use the Prop mount with 3 Lipos, the rubber is not strong enough to hold the prop.

1 comment. Reply..

Overall Rating		pardus 246 likes
Value	UNRATED
Quality	UNRATED

5 thumbs up!

APCe 6x4 494g 12.18V 11.1A 136W
APCe 6x5.5 480g 11.95V 13.9A 166W
APCe 7x5 682g 11.79V 20.7A 244W

Bell slightly out of true

Tested 4 May 2009

No comments. Reply..

Overall Rating		giuseppe germano likes
Value	UNRATED
Quality	UNRATED

4 thumbs up!

i tried this motor with a 7x6 apc propeller and a 25a speed controller, i got 140w power. it's a medium quality motor and is a little bit expensive related to the same class motors

1 comment. Reply..

Overall Rating		Ator23 8 likes
Value	UNRATED
Quality	UNRATED

Like it?

I tried this motor on 3S with different props: Graupner SF 6.7x3.5 - 17 Ampere. TGY SF 8x3.8 - 25 Ampere. The motor got burned after 30 seconds! So do not go bigger than 7 inches with this motor. Otherwise try the 1200kv version of this motor.

No comments. Reply..

.....click here to see all reviews

SCM 3223 1550kv Brushless Outrunner

Spec.Battery: 2-3 LipolyKv: 1550rpm/vMax Eff: 80%Max Current: 6 to 16A (over 73% efficiency)Int. Resistance: 70mohm10v no Load current: .95ADimensions: 27.7 x 30mmShaft: 3mmWeight: 57gModel Size: up to 700gRecommended Prop: 9x5 PRODUCT ID: SCM3223-1550

Spec.
Battery: 2-3 Lipoly
Kv: 1550rpm/v
Max Eff: 80%
Max Current: 6 to 16A (over 73% efficiency)
Int. Resistance: 70mohm
10v no Load current: .95A
Dimensions: 27.7 x 30mm
Shaft: 3mm
Weight: 57g
Model Size: up to 700g
Recommended Prop: 9x5

PRODUCT ID: SCM3223-1550