Multistar V-Spec 1104-3600KV Multi-Rotor Motor (CW)
Multistar V-Spec 1104-3600KV Multi-Rotor Motor (CW)
Copy and Share the Below URL
The Multistar V-Spec Outrunners are designed to maximize performance! Setting new standards in multi-rotor performance, each Multistar V-Spec motor is purpose designed for a specific application allowing for efficiency and power to be optimized for the intended use.
Far from being just a pretty face, Multistar V-Spec motors are built using the highest quality components and manufacturing methods; Japan bearings, N45SH magnets, .2mm laminations, 180deg oxygen free copper wire, 0.005g balancing tolerance, precision windings and rigorous post production inspection to ensure that only motors fully matching the specifications are made available for sale.
The Multistar V-Spec 1304-3100kv is a real little gem of a motor designed for the mini range of multi-rotors and optimized for 3-inch props, perfect for those tighter frames where 3 inch props is the maximum.
Multistar V-Spec raises the bar with its outstanding quality and performance.
Features:
• Japan Bearings
• N45SH Magnets
• 0.2mm Laminations
• 180deg oxygen free Copper wire
• 0.005g Or better balancing
• precision windings
Specs:
KV(RPM/V): 3600KV
Voltage: 11.1V (3S LiPoly)
Max power: 38.9W
Max Amps: 3.5A
No Load Current: 0.5A/10V
Internal Resistance: 0.64 ohm
Number of Poles: 9N/12P
Motor Shaft: 1.5mm
Prop Shaft: 4mm
Prop size: 3 inch recommended
Bolt hole spacing: 10 x 10 M2
Lamination thickness: 0.2mm
Magnets: N45SH
Balancing spec: 0.005g
Wire: 180deg O2 free
Dimensions: 11 × 4 mm
Weight: 8g
-
Kv(rpm/v) 3600.00
-
Max Current (Motor) (A) 8.00
-
Resistance (mh) 0.64
-
Max Voltage (V) 7.00
-
Power (W) 16.00
-
Shaft A(mm) 1.50
-
Length B (mm) 11.00
-
Can Diameter C(mm) 15.00
-
Can Length D(mm) 5.00
-
Total Length E(mm) 22.00
