New Items 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

0.46 Servoless收放式起落架瓦特/金属耳轴 - Noseleg

0.46 Servoless收放式起落架瓦特/金属耳轴 - Noseleg

Shipped From:
  • Global
Discontinued Product

Please continue searching for a similar product.
SKU:
189000022
WANT FREE SHIPPING? Click here to find out more!

最简单的方法把缩回在你的飞机。无需安装控制箱,凌乱布线或复杂的空气系统。只需拧在缩回,连接到您的Rx和你准备!
金属传动装置和高扭矩马达伺服可靠的机制确保无故障飞行!

为什么空气系统打扰时你现在可以在价格的一小部分有一个真实,可靠的电力单位?

特征:
*3秒过电流和干扰保护
*包括转向系统配件
*智能电路保持即使接通电源装置缩回
*只有发射机的信号可以扩展或收起起落架
*车轴和钢丝腿的含

规格。
工作电压:4.8〜7.2V
工作电流:0.7〜2.0A(3秒钟过电流保护)
退装载180克
电线腿的:5毫米
安装孔距:25.5毫米x35mm
收回安装板尺寸:44.5毫米点¯x38毫米
退深度:25毫米
收起长度:78毫米
总长度:250毫米(收回)
腿长:195毫米
不适合比3.5千克重的飞机

  • SKU 189000022
  • Brand -
  • 容量(mAh) -
  • 重量 238.0000
  • 长度 385.00
  • Packaging Width 30.00
  • 高度 145.00

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Nice robust unit that works smoothly and reliably. Just bear in mind that although they are sold as rotating mains or steering (nose wheel) as well as regular mains, the parts for rotating are not included and the suggested system using wires to make a steerable nose wheel doesn't work. Using steering wires as shown in the instructions (?) allows the leg to rotate during retraction resulting in the coil or brass steering lugs contacting the body and jamming the unit solid . Ideal as simple mains, and the overload cut out works perfectly as I've discovered whilst trying to set up the steering system. Sorry only three stars overall because of the issues mentioned above. No probs at all as a normal main retract though.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice robust unit that works smoothly and reliably. Just bear in mind that although they are sold as rotating mains or steering (nose wheel) as well as regular mains, the parts for rotating are not included and the suggested system using wires to make a steerable nose wheel doesn't work. Using steering wires as shown in the instructions (?) allows the leg to rotate during retraction resulting in the coil or brass steering lugs contacting the body and jamming the unit solid . Ideal as simple mains, and the overload cut out works perfectly as I've discovered whilst trying to set up the steering system. Sorry only three stars overall because of the issues mentioned above. No probs at all as a normal main retract though.

Hii everbody.
This item come as 1 pair or 1 pcs?
Can I use thim retracts on my p-51 46 size?
Thank you

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Hii everbody.
This item come as 1 pair or 1 pcs?
Can I use thim retracts on my p-51 46 size?
Thank you

Here's the update to my two comments already made. I discovered that I can't use this unit as a nose gear to my satisfaction. The coil on the strut can only be retracted sideways, which in turn makes the wheel sideways. I can cut off the coil and use a straight wire, or, put the coil further down on the strut to clear the mechanism. The unit is obviously designed as a rotating landing gear for the wings of warbirds.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Here's the update to my two comments already made. I discovered that I can't use this unit as a nose gear to my satisfaction. The coil on the strut can only be retracted sideways, which in turn makes the wheel sideways. I can cut off the coil and use a straight wire, or, put the coil further down on the strut to clear the mechanism. The unit is obviously designed as a rotating landing gear for the wings of warbirds.

Sorry, I forgot, it's five stars from what I can see. I ran it on the bench multiple times, stalled it to test it also, and all works perfectly. I'm matching this with two of the main electrics from Hobby King which I also have in a Great Planes AT-6 and a Hangar 9 Spitfire which both work flawlessly after a couple dozen flights.

Word of caution, be sure to check that you have channel five active and the correct switch selected on your transmitter. I forgot and the retract just kept cycling without any switch input at all! Embarrassing!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Sorry, I forgot, it's five stars from what I can see. I ran it on the bench multiple times, stalled it to test it also, and all works perfectly. I'm matching this with two of the main electrics from Hobby King which I also have in a Great Planes AT-6 and a Hangar 9 Spitfire which both work flawlessly after a couple dozen flights.

Word of caution, be sure to check that you have channel five active and the correct switch selected on your transmitter. I forgot and the retract just kept cycling without any switch input at all! Embarrassing!

I received mine yesterday. It works well, slow, steady cycle. The unit comes mounted on a card encased in plastic. In between the folds of the card is a picture instruction sheet. It shows how to use the unit fixed, as a rotator, or as a steerable nose gear, which is the use I intend. You can just about see it in the picture, but there is a brass collar just in front of the coil on the strut. The brass fittings go on either or both sides of the collar to attach one pushrod or two cables for steering. The only issue I see is that the coil on the strut is reversed for my purpose although I haven't installed it yet, so I'm not sure if it rotates flat when the wheel is retracted turning the coil sideways like in the picture. That may be the design, but I'll have to use a very small wheel to fit the nosegear bay of my plane to retract it sideways! Strut, axle, and hardware are VERY robust.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I received mine yesterday. It works well, slow, steady cycle. The unit comes mounted on a card encased in plastic. In between the folds of the card is a picture instruction sheet. It shows how to use the unit fixed, as a rotator, or as a steerable nose gear, which is the use I intend. You can just about see it in the picture, but there is a brass collar just in front of the coil on the strut. The brass fittings go on either or both sides of the collar to attach one pushrod or two cables for steering. The only issue I see is that the coil on the strut is reversed for my purpose although I haven't installed it yet, so I'm not sure if it rotates flat when the wheel is retracted turning the coil sideways like in the picture. That may be the design, but I'll have to use a very small wheel to fit the nosegear bay of my plane to retract it sideways! Strut, axle, and hardware are VERY robust.

retract_assembly Download [1182]

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!