注册

Product Finder

设置

Useful links

 
[["US","AU","GB","DE"]]
注册
Shipped From:
  • Global
  • USA

1/10规模警方灯条

1/10规模警方灯条

QTY:

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 18.76
Rating:
Stock:
重量:
63
SKU:
258000019

Price War

产品介绍

合金看看上面警方灯集群与闪烁的蓝/红色LED的前部和琥珀色/后部蓝灯,自带安装固定件和2个开关导致改变的前部和后部的LED两者的闪光模式,还自带了PP9电池适配器,也可以通过您的RX电源供电。

眼镜:
尺寸:114毫米点¯x24毫米×6毫米
单位重量:13克
工作电压:3V〜12V

Product
Specifications

额外信息

  • 商品编号:
    258000019
  • Brand:
    N/A
  • 重量(g)
    63.00
  • 长度
    144.00
  • 宽:
    18.00
  • 高度:
    70.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
Not the best lights, but work fine. I would recomend them for a stealth install.
Quality
Value
Overall
Quality
Value
Overall
I have had this Light Bar for some time now and it doesn't get old. I get a lot of compliments on my vehicle. I just wish someone would come up with a way to control it remotely. I modified an old servo control to turn it on and off with my 3rd channel. All in all a nice little add-on.
Quality
Value
Overall
Quality
Value
Overall
Molto belle per le auto 1/10 e altro
Quality
Value
Overall
Quality
Value
Overall
The button control flashing mode for front and back, respectively (one each).

The selected mode is not stored on power off.

One side has 8 yellow/amber leds, the other 4 red and 4 blue.

Each has 9 different flashing modes, but the lists seem to be reversed. To have the same mode on both sides, you need to press the button once for side a and 8 times for side b!

LEDs have lenses and are quite bright, they are SMD types and sit on small pcb stripes mounted 90s on a control board. Mine were not really in a line, when you look in the beams you'll notice some lamps are dim, because they have small angles.

The bottom of this control board is flat, the cable hole is slightly out of center, the board is shorter than the case.

The case is clear plastic with a silver painted top, but needs a little dremel work: the screw tunnels are to wide to fit between the LED pcbs.
Quality
Value
Overall
Quality
Value
Overall
looks and works amazing, just wish there was an alternate power source or adapter to run of the receiver or balance plug
Quality
Value
Overall
Quality
Value
Overall
Very good item.
Easy to attach, and you can get power from your battery's balance plug if you are using 2s/3s.

The only reason i wont give 5 stars is that the police bar itself is only covered on one side. Its completely open on the bottom, wich means exposed to dirt/water.
If it was in a solid enclosure, then 5 out of 5.
Quality
Value
Overall
Quality
Value
Overall
Excellent piece of Bling, fit it to any model easy to put together and to mount, dont restrict yourself to the top of a car, let your imagination flow and use it on any type of RC model. Light weight and slim compact build lends itself to many other projects apart from cars, mounted side ways ie in line with the fuselage of and airplane or helicopter really aids the identification of where the craft is at any stage just good kit and really cheap for what it is.
Quality
Value
Overall
Quality
Value
Overall
Arrived in a nice display pack with basic instuctions. I was able to run these from the blaance port of my lipo battery. These lights have an operating Voltage of 3-12v. One button controls the front red and blue lights and the other is for the rear amber lights. The bottom of the lights are open and should be covered to prevent dust and debry from getting in the housing. I used a dremel to cut a bottom plate out of the case that came with the lights and sealed it with some clear RTV. The case could easily be cut with a hobby knife also.
Quality
Value
Overall
Quality
Value
Overall
Fantastic item. I use them all the time. In planes, in quadcopters, in cars, in boats - you name it. Nice durable gadget.
Quality
Value
Overall
Quality
Value
Overall
I put this on my quad and it looks badasss
Quality
Value
Overall
View all reviews
Upload
Videos
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

产品标签

使用空格分隔标签。使用单引号(')标注词组。