注册

Product Finder

设置

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
注册

2.4GHZ 1000MW的Tx Rx和三分之一英寸CCD摄像机PAL

2.4GHZ 1000MW的Tx Rx和三分之一英寸CCD摄像机PAL

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
重量:
635
SKU:
CP100024RX12T
产品介绍

  12通道的Tx / Rx视频系统采用CCD摄像头。
该相机采用了优质玻璃透镜式SONY CCD摄像系统和强大的1000MW TX。

不像其他的通用系统,我们已经产生了布线织机和与照相机包括它使得Tx和相机将兼容并相同的电压。
如果你买你的相机和Tx单独插头极性和电压可能会非常不同。

包括在内。
1个SONY CCD 1/3英寸摄像头
1个2.4GHz的12路视频传输器(1000MW)
1个2.4GHz的12通道视频接收器

相机规格。
CCD传感器类型:1/3彩色SONY CCD
像素;
NTSC:510(H)* 492(V)的
PAL:500(H)* 582(V)(包括)
扫描系统:隔行扫描
同步:系统:国米
水平清晰度:420TV线
最低照度0.01LUX / F1.2
DSP + CCD:CXD3142R + 405AK
S / N比:48分贝
伽玛修正:0.45
白平衡:自动
自动背光补偿:自动
镜头:3.6MM
音频:无
输入电压:9〜12.6V
电流80MA
电子快门:1/50(1/60)〜1 / 100,000s
视频输出:1.0VP-P复合视频
工作温度:-20〜50
尺寸:38 *38毫米
飞行时间:约60分钟/ 100mAh的3S

FPV的Tx规格。
信道:12-CH,AV同步
电源:1000MW
输入电压:8〜12V
重量:85克
尺寸:41x28x16mm
通道:2.2G / 2.3G / 2.4G

Product
Specifications

额外信息

  • 商品编号:
    CP100024RX12T
  • Brand:
  • 重量(g)
    635.00
  • 长度
    185.00
  • 宽:
    75.00
  • 高度:
    153.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
This Video transmitter is amazing!!

I have done hundreds of flights with it an I am VERY happy with it! The video quality is super good an the range is good, too! (little more than 2 kilometers with stock antennas, but much more with good antennas, I have done 6km with CloverLeaf/3-Turn-helical antennas!!) There is only one problem: The Vtx is getting hot! So opened it and filled it completely up with heatsink paste. Do This and make sure that the TX is getting fresh air during flight and you are fine!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Completely useless China-quality crap. I waited for it for weeks and found the TX to be totally dead.

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Good camera but the Tx gets heated up...
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
As a Radio Ham and aerial designer , ill build an antenna system that will work over 5Km with this system, When I test ill come back and give the results, curruntly achieved 4.65 KM on 5.8 GHz (200mW ) see www.williamsbuild.net
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Check the connection of the camera. vcc is inverted to the site of Vout
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Hi Everyone,

I purchased this item and when I connected the cables to make the first test didn't work. The camera got too hot and I start looking around to understand why . Then I noticed that the cable that connects the camera to the battery and TX was incorrectly assembled , so the red was connected to Vout and the white to . After a long battle to get HK attention I had to send the package back to them. So HK decided to send me a replacement which arrived last week. I got it and this time before connecting and switch it on I checked the cable and once more the cable was connected in the wrong way. Not to lose more time I made the modification and the camera works fine now. My point is, if someone is planning to buy this package, pay attention to the cable, this way you may avoid a broken camera and all the costs to send back to HK and get a replacement.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
good tx and rx, mine gets hot but i readed some reviews and orderd a esc heatsink pack, this in combination with a small pc fan and your off to go!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Hello all ,

1.Delivery was very fast , my advice buy a batteries for the transmitter and to the receiver

Please note this came without any manual book or wring instruction.

But HK make 90pcnt perfect of the wring ..It not complex to make the wring but it will be wisely to buy and plastic adapter .

2. The camera came as in the picture (I built my own cover and adapter to the UAV plane ) but my advice

Don't save the money and buy camera adapter.

3.camera picture is good ! make sure your transmitter is cool up .

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
It would be good if Hobby King would just sell the TX (transmitter) by its self as they do for the 5.8ghz as I have 4 receivers now but only use 2 of them and will end up with more of them as I have to buy complete systems for my other planes. HINT HINT HK
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
mesafesi olduka yksek,kullandnz kumandada 2,4Ghz olmamal,kumandann sinyali kamera sinyalini bastrabiliyor.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

产品标签

使用空格分隔标签。使用单引号(')标注词组。