New Items 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

32毫米合金折叠式支柱与微调2.3毫米/3毫米/3.17毫米适配器

32毫米合金折叠式支柱与微调2.3毫米/3毫米/3.17毫米适配器

Shipped From:
  • USA
  • Global
QTY:

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 9.61
状态:
有货
SKU:
32FPSPIN
WANT FREE SHIPPING? Click here to find out more!

直径为32mm的合金微调折叠道具,自带的2.3毫米为3mm和3.17毫米电机轴适配器。

道具安装螺栓:2.2
重量:17克

  • SKU 32FPSPIN
  • Brand -
  • 容量(mAh) -
  • 重量 28.0000
  • 长度 80.00
  • 30.00
  • 高度 60.00

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Satisfactory.

Nowhere in the world can not get this price.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Satisfactory.

Nowhere in the world can not get this price.

no matching propeller blades available ! :( was hoping to mix 'n' match with a previous purchase that lacked the prop shirt adapter size i needed, but no such luck - nice quality anyway, my mistake

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

no matching propeller blades available ! :( was hoping to mix 'n' match with a previous purchase that lacked the prop shirt adapter size i needed, but no such luck - nice quality anyway, my mistake

Kuel pre mj vetro specter z HK.Pekne spracovan

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Kuel pre mj vetro specter z HK.Pekne spracovan

I use this spinner on a Passer-X electric glider. It spins true and was just a little off balance. The blade mounting bolts on my spinner is 2.3mm in diameter and the gap for holding the blades are 6.3mm so it will be ok for propeller blades with 6mm base. The flange on the spinner back plate that compresses the collar has an 11mm outer diameter. If you are mounting the spinner very close to the motor you have to make sure that there is at least 11mm between the motor mounting screws. I drilled and tapped the blade holders to accommodate 3mm screws because my blades have 3mm holes at the base. All in all an ok product.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I use this spinner on a Passer-X electric glider. It spins true and was just a little off balance. The blade mounting bolts on my spinner is 2.3mm in diameter and the gap for holding the blades are 6.3mm so it will be ok for propeller blades with 6mm base. The flange on the spinner back plate that compresses the collar has an 11mm outer diameter. If you are mounting the spinner very close to the motor you have to make sure that there is at least 11mm between the motor mounting screws. I drilled and tapped the blade holders to accommodate 3mm screws because my blades have 3mm holes at the base. All in all an ok product.

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!