注册

Product Finder

设置

Useful links

 
[["US","AU","GB","DE"]]
注册
Shipped From:
  • Global

带有2个UBEC输出配电板

带有2个UBEC输出配电板

QTY:

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 16.26
Rating:

Stock:
重量:
25
SKU:
747000004-0

Price War

产品介绍

带有2个UBEC输出配电板

这是一个不同风格的PDB具有通用性,因为它可以安装有任何30.5毫米或45毫米安装孔。它可以处理多达8个胚胎干细胞。甚至还有一个微型JST-SH采用5V,电流和电压传感器APM / PIX。

有在此PDB 2 UBECs一给出了一个恒定5V / 3A输出,另一种是5V和16V / 3A(通过电位计调节和依赖于输入电压)之间的可变输出。

这是一个必须具备的,极具特色。

特征:
•多达8个胚胎干细胞
•两个UBECs,5V和5V至16V(可调)
•包括APM / PIX电流和电压传感器,适用于OSD

眼镜:
最大输入电压:26VDC(6S锂聚合物)
UBEC 1:5V / 3A
UBEC 2: 可变5V到16V / 3A(可调降压)
尺寸:50×50毫米
安装孔:45毫米和30.5毫米
重量:12克

包括:
1个PDB
1个电源模块端口电缆

Product
Specifications

额外信息

  • 商品编号:
    747000004-0
  • Brand:
  • 重量(g)
    25.00
  • 长度
    135.00
  • 宽:
    9.00
  • 高度:
    90.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
The board is very nice, has a 5.1v regulator and a variable one. Also current/voltage sensors (there's a current shunt on the back side) and it comes with a nice silicon cable connector compatible with the ARM power module.
However, I measured the 5V rail and when adding some load on it the voltage overshoots to 12V and then down to 3V before coming back to 5V. I tested this on both 12V input and 8V input and with loads from 500mA to 2A.
No way I'm using this to power anything more than a DC motor or light bulb.
Quality
Value
Overall
Upload
Videos
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

产品标签

使用空格分隔标签。使用单引号(')标注词组。