注册

Product Finder

设置

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
注册

900MHZ 200mW的发射/接收&1/3英寸CCD摄像头NTSC

900MHZ 200mW的发射/接收&1/3英寸CCD摄像头NTSC

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
重量:
409
SKU:
CN20012RX4T
产品介绍
  12通道的900Mhz的Tx / Rx视频系统采用CCD摄像头。非常适合在较少限制的射频功率输出国家FPV系统。

不像其他的通用系统,我们已经产生了布线织机和与照相机包括它使得Tx和相机将兼容并相同的电压。
如果你买你的相机和Tx单独插头极性和电压可能会非常不同。

包括在内。
1个SONY CCD 1/3英寸摄像头
1个4 900Mhz的路视频传输器(200mW的)
1个12 900Mhz的通道视频接收器


相机规格。
CCD传感器类型:1/3彩色SONY CCD
像素;
NTSC:510(H)* 492(V)(附带)
PAL:500(H)* 582(V)的
扫描系统:隔行扫描
同步:系统:国米
水平清晰度:420TV线
最低照度0.01LUX / F1.2
DSP + CCD:CXD3142R + 405AK
S / N比:48分贝
伽玛修正:0.45
白平衡:自动
自动背光补偿:自动
镜头:3.6MM
音频:无
输入电压:9〜12.6V
电流80MA
电子快门:1/50(1/60)〜1 / 100,000s
视频输出:1.0VP-P复合视频
工作温度:-20〜50
尺寸:38 *38毫米
飞行时间:约60分钟/ 100mAh的3S
 
FPV的Tx规格。
通道:4-CH,AV同步
功率:200mW的
输入电压:12V
重量:18克
尺寸:31x88x8mm
频率:0.9G 0.910G,0.980G,1.010G,1.040G

Product
Specifications

额外信息

  • 商品编号:
    CN20012RX4T
  • Brand:
  • 重量(g)
    409.00
  • 长度
    185.00
  • 宽:
    71.00
  • 高度:
    153.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Bought this unit to troubleshoot my existing one that stopped showing video feed. When unit arrived I tested and got no picture. After swapping Tx, Rx, and Camera from new to old to see what issue might have been I noticed the wiring harness had the red wire going to the video output on the camera which I thought was odd. Confirmed on my old wire harness that this should have been the white wire. After cutting and resoldering I got my video feed. Further troubleshooting indicated that the camera on my old unit had gone bad. Would not recommend this product due to camera failure and the lack of quality control they had on provided wire harness. I will say the Tx and Rx are great and get excellent range though, my video feed was stable at 1.5 miles with no obstructions and was too scared to test any further.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
If you are on the fence about this setup, pull the trigger! Do NOT be tempted to buy the $12 HK cloverleaf antennas, they are crap. Spend your money on the blue ibcrazy antennas. I fly this system with those antennas and I can out fly my controller without so much as a glitch in my video.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have had this system for a month and have not had any problems. The range is good, I have flown out to 1 mile and not had much trouble except some minor static at high bank angles. The camera works great in low light. I have flown at dusk and it looks no different that during the day. My only problem with this kit is that there is no power cable for the video receiver, I found an old calculator power supply that had the right connector and made my own power cable.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
very nice performance work well
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is an amazing system! It exceed my expectations. I was hoping for it not to have static because there were 2 cell towers about one half a mile away and another one a mile away. luckily I was able to fly in a radius of about 300 Meters and the reception was rock solid. Only time it had gone bad was because I was flying right above me. But aside from that it had a very clear image. For the first time trying FPV it far exceeded my range expectations.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Im happy with what I got in the box, except that the pre-done wiring for the camera and Tx was faulty. I plug the camera and get nothing but a blue screen, lucky I unplugged it before burning out the camera and noticed that the 12 volt and video out were the wrong way around, after some adjusting it all worked. I would of thought that it would have been checked and fixed at the factory. I hope that I find nothing else wrong with any of my orders as eBay's prices are starting to look far more competitive.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Poorly wired, unit did not work. Can't buy replacement VTX only so I essentially wasted money. At least I didn't waste too much money but, wasted none the less
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
while this is a great value, it came wired all wrong. I didn't expect this problem so I plugged it in and after I noticed the improper wiring I fixed it. Still doesn't work tho, not sure if I fried the camera or transmitter or both.... time will tell. Either way major buzz kill. I am not HK's quality control so I shouldn't have to double check everything like this :(
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Just received this unit in the mail. Only took 10 days to come in here in the US. Quality looks good and I can't wait to try it out. this will be my first FPV system. The one issue is the wires on the TX. Positive and Video are switched in the wiring harness. Many people have experienced this. Make sure that your harness is right.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This system came to me with the wiring wrong. So it would have been destroyed had I not corrected the wiring issue prior to powering the unit up. The support at HK was very poor. I chatted with a person who passed me on to someone who was supposed to be a specialist. This specialist named PS 6 on the chat was smug and rude. She assumed I did not look at the posted instructions. She had no idea that the wiring was wrong. When I pointed out that the wiring did not match the silkscreen markings on the camera board, she claimed she did not have access to the correct information to help me. Also, this person could not understand English very well. So I was told to email HK support. Rather than do that, I researched the camera and found that many others have had this same problem and destroyed their camera or sent it back to HK only to be forgotten. One guy said he had to complain 13 times before they gave him credit minus shipping. I bought this setup because it was supposed to be pre wired. How many people destroyed their camera because they trusted HK to wire the camera correctly. How many people sent their camera back and never received any response. Apparently there is no one at HK that is truely a specialist on this. I will post in the files section exactly how to set this system up so you don't destroy it when you power it up.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

产品标签

使用空格分隔标签。使用单引号(')标注词组。