New Items 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

ADS400XLWater冷却电机(船)

ADS400XLWater冷却电机(船)

Shipped From:
  • Global
Discontinued Product

Please continue searching for a similar product.
SKU:
ADS400XL
WANT FREE SHIPPING? Click here to find out more!

眼镜。
RPM /ν:3300kv
:567瓦特
最大安培:45A
电压:11.1V
重量:76克
直径:28.1毫米
:3.0毫米
电机长度:37毫米
Vength:13毫米
空载数据:10V 3.5A 33000rpm

  • SKU ADS400XL
  • Brand -
  • 重量 95.0000
  • 长度 0.00
  • Packaging Width 0.00
  • 高度 0.00
  • 千伏(转/ v)的 3300.00
  • 最大电流( A) 45.00
  • 电阻( MH) 0.00
  • 最大电压(V) 11.00
  • 功率(W) 567.00
  • 轴(MM) 3.00
  • 长度B (毫米) 38.00
  • 直径C(毫米) 28.00
  • 可以长深(mm ) 23.00
  • 总长度E(毫米) 52.00

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

A complete fail. The shaft is blocked, does not rotate. Plus the two pipes for water cooling that should be attached to the body of the motor do not fit (they should be screwed to the body, but arrived too small to fit). What a waste!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

A complete fail. The shaft is blocked, does not rotate. Plus the two pipes for water cooling that should be attached to the body of the motor do not fit (they should be screwed to the body, but arrived too small to fit). What a waste!

last time i bought this motor for my 720cm long boat. but unfortunately this was a mistake. may be i got bad piece but there are few things which are stopped my idea to use it in my boat.
1st test: motor plugged to Birdie 70A run on 3s Lipo, ESC default setting. 1/3 throttle motor had huge vibrations, rotating cup (this one with magnets) have to much free space and moving around 2mm along the axis. finally get sparks because the magnets touches stator. so i stopped it.
2nd test: ESC setup correct for high RPM outrunner. i repaired freeplay along axis. but unfortunately motor still falls into vibrations around 1/3 throttle, this time without sparks, but still unable to use it in boat because unbalanced rotating on high RPM thing is unpredictable.
ESC is setup is 100pcnt ok, i plugged another high RPM outrunner motor to it and works smoothly with no problem.

water cooling looks a bit weak but probably will do the work. power and rpm declared seems to be close to true. unfortunately have no tools to measure. connection cables is a bit thin for 45Amps

because all of that giving only 2 crowns. 32$ thrown out :(

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

last time i bought this motor for my 720cm long boat. but unfortunately this was a mistake. may be i got bad piece but there are few things which are stopped my idea to use it in my boat.
1st test: motor plugged to Birdie 70A run on 3s Lipo, ESC default setting. 1/3 throttle motor had huge vibrations, rotating cup (this one with magnets) have to much free space and moving around 2mm along the axis. finally get sparks because the magnets touches stator. so i stopped it.
2nd test: ESC setup correct for high RPM outrunner. i repaired freeplay along axis. but unfortunately motor still falls into vibrations around 1/3 throttle, this time without sparks, but still unable to use it in boat because unbalanced rotating on high RPM thing is unpredictable.
ESC is setup is 100pcnt ok, i plugged another high RPM outrunner motor to it and works smoothly with no problem.

water cooling looks a bit weak but probably will do the work. power and rpm declared seems to be close to true. unfortunately have no tools to measure. connection cables is a bit thin for 45Amps

because all of that giving only 2 crowns. 32$ thrown out :(

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!