• 现在用OneShot125运费 。
**当前股价随5V BEC。有些Afro12哪里有6V BEC发货，因为大多数的飞行控制器和接收器可以接受此电压这不应该是一个问题，但如果你有与6V BEC和兼容性问题，请联系我们的客户服务团队，有一个电压降压适配器发送给您免费。
Horrible speed controller. Would shut down continuously on 4S and even when it didn't it still flew like garbage compared to the Little Bee 20A ESCs. Do yourself a favour and spend the little extra now so you don't have to re-buy gear later.il cavo che manda il segnale è schifosamente corto. ho dovuto usare dei cavi di altri esc e fare saldature.pessimi
per il funzionamento non saprei dire..al momento vannothese are my favorite for 250 size quadcopters!not to happy with these.. bought 4 less than a year ago.. and 2 failed on me with only 3 flights in that year... so word to the wise dont buy afro esc all togetherStandard and works
Bought 4 of these for my first quadcopter build. They all worked for a couple of minutes the one of them stopped working and had a "Stuck high on B" error.perfect, i bought 4 and all work fineVery impressive throttle response. Teaching myself quad flight. With kk2 board this is going well.These ESCs work well out of the box with the DYS1806 motors I'm using. Controlling them on an SP Racing board with Cleanflight using OneShot. Handle 3S and 4S without any issues with fibre glass composite 5045 bull nose props.
I must be pushing these ESCs beyond their rating as the battery I'm using has a greater C rating than what should be possible and voltage drops right down. Never noticed them getting hot from this.
But the downsides; not exactly the best looking ESC, but I stripped the heat shrink off anyway and replaced it. There's a lot smaller ones out there with the same rated capacity. The BEC is only rated to 0.5A, so can't power a whole lot from one ESC (on a mini quad you do have 4 of them to spread the load with), the Linear BEC gets really hot when in use towards their rating.
In short these are reliable, and I would use them again (and have before).These ESC"s work well, they required a calibration for me out of box, but they have not failed me yet (still on my first four.) I would recommend cutting down some of the shrink wrap VERY CAREFULLY to give yourself extra play with the wires.