注册

Product Finder

设置

Useful links

 
[["US","AU","GB","DE"]]
注册
Shipped From:
  • Global

ASP S52A - 消声器总成

ASP S52A - 消声器总成

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 12.89
缺货!
Rating:
Stock:
OUT OF STOCK
重量:
127
SKU:
S52A11-S52601

Price War

产品介绍

ASP S52A - 消声器总成

Product
Specifications

额外信息

  • 商品编号:
    S52A11-S52601
  • Brand:
    N/A
  • 重量(g)
    127.00
  • 长度
    170.00
  • 宽:
    43.00
  • 高度:
    65.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
Try to put this muffler to your ASP .46 engine. Sound good and you will have more power.
Quality
Value
Overall
Quality
Value
Overall
Like many ASP parts, this is a clone of older OS part. With 37 mm distance between screws, it fits OS 50 SX nicely. Beware: the muffler comes without bolts!

Although surface quality of the parts is pretty good, the muffler is heavier than the original and some parts are pretty bad: the long screw holding the muffler together is rather thick and made of very soft steel. The aluminum diaphragm inside the muffler is so poorly made, that the holes in it are clogged...

Summary: if you don't mind the extra weight and if you fix bad diaphragm, it is a decent muffler.
Quality
Value
Overall
Quality
Value
Overall
Used in ngh gt9,VERY QUIET
Quality
Value
Overall
Quality
Value
Overall
A very nice muffler, at a fraction of the cost others sell them for, which I purchased for my Enya 0.29 nitro ( glow ) engine. I intend to mount it on using the strap-on method since the spacing between the mounting holes is just a bit short, however this is what I had predetermined prior to my purchase. The measurements for this muffler are as follows: the spacing between the holes on the face of the stack is 37mm and the holes are threaded for 3mm ( M3 ) bolts - the length of the face of the stack is 44.5mm - the exhaust outlet on the face of the stack is 28mm x 7mm ( square shaped ) with a 1.5mm lip - the length of the stack is 28mm - and the overall length of the muffler from end-to-end is 170mm. Shipped from the International warehouse on 17/09/2014 ( dd/mm/yyyy ) registered ( tracking ) air mail with Singapore Post and it arrived through the USPS San Francisco ISC to me on 26/09/2014 . That was FAST !!! Thanks a lot Hobby King ( a.k.a. Hextronik ).
Quality
Value
Overall
Quality
Value
Overall
Como sempre, a qualidade no deixa a desejar, produto muito bem feito.
Quality
Value
Overall
Quality
Value
Overall
passe aussi impeccable aussi sur un asp 61.
Quality
Value
Overall
Quality
Value
Overall
For general info: It also fits the new Evolution GX 10cc small block gas engines. Original muffler from Evolution does not hold together under the heat. Hope this one is better in this aspect!
Quality
Value
Overall
Quality
Value
Overall
Fitted to my OS 46AX no problems. Very effective. You will need 3mm screws to fit it, length according to your engine, and a gasket. The mating face to the engine is not perfect, small imperfections, but a paper type gasket works fine.
Quality
Value
Overall
Quality
Value
Overall
.My order was delayed 27 days and dnt printed bad quality for HK.

payed 1 month ago !!!!!!!! bad hk
Quality
Value
Overall
Quality
Value
Overall
perfect fit and replacement for .46-.52 OS, ASP, TT engines
Quality
Value
Overall
View all reviews
Upload
Videos
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

产品标签

使用空格分隔标签。使用单引号(')标注词组。