注册

Product Finder

设置

Useful links

 
[["US","AU","GB","DE"]]
注册
Shipped From:
  • Global
  • USA

突击450L无副翼3D直升机套装

突击450L无副翼3D直升机套装

QTY:

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 133.02
Rating:
Stock:
重量:
1365
SKU:
9155000263-0

Price War

esc
battery
servo
motor
acc
产品介绍

突击450L组装套件从已经流行的各种攻击直升机450上如下。它拥有一系列改进和升级零件的同时保留了functionalilty和质量,您都来自这一高超的范围直升机的期望。更奇妙的CNC机加工铝件其中许多阳极一个醒目的绿色。

是其中的一些改进功能如下:

•斜齿轮和减少污水和磨损主传动齿轮
•更长的尾桁(385毫米),这为40mm比以前的版本长
•更大的主旋翼直径(最多可接受360毫米转子叶片)
•更大tailrotor直径(67毫米尾巴刀片)
•重新设计和改进的碳侧架
•尾巴扭矩管驱动,以提高响应尾
•更多的部件由CNC加工铝和较少的尼龙成型
•改进旋翼头与斜盘系统
•全CNC加工tailrotor变速箱尼龙伞齿轮
•CNC加工铝电机安装
•快速释放滑动电池托盘

这样的例子不胜枚举,而且太多在这里提及,但还有一个就是有点不同的是,450L拥有CNC加工尾巴伺服安装安装尾杆下的主框架之间。这种变硬此时帧并且还给出了一个很好的直连杆的尾巴。还已大到足以携带稍大更强尾伺服今天在市场上。

眼镜:
类型: 集体间距无副翼3D直升机
主旋翼直径:755毫米
尾旋翼直径:175毫米
主齿轮:130T
小齿轮:11T
主减速比:11.82
长度:765毫米
身高:205毫米
重量:410克(仅帧)

包括:
突击450L组装套件
尾桨
刀片支持球童
电缆扎带和组装硬件
螺旋齿轮马达(11T)
大会手册

需要:
3×高扭矩的金属齿轮舵机小(最大长度24毫米)
1个高速尾桨伺服(最大长度36.5毫米)
1个无副翼系统
1×450大小的直升机无刷电机(1700〜2100Kv)
1个2200mAh的3S LiPoly电池
1×40〜60安培ESC
1PR主转子叶片(最大335毫米)
1个6CH发射器和接收器
1个充电器3S LiPoly电池

注:有关零部件的完整列表, 请点击这里

Product
Specifications

额外信息

  • 商品编号:
    9155000263-0
  • Brand:
    N/A
  • 重量(g)
    1365.00
  • 长度
    470.00
  • 宽:
    110.00
  • 高度:
    160.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
Dont waste your $ on any other 450 kit. I did and just found this 450L is way way superior kit. Why? Canopy is FG. Frame is assembled and even the frame sharp edges are smooth. Shipping was 4 days and low cost. So 6s or 3s build is up to you. What a nice kit @ 1/3 the cost.
Quality
Value
Overall
Quality
Value
Overall
Couldn't wish for better. It's fantastic value and quality.
Quality
Value
Overall
Quality
Value
Overall
Have assembled it and have to say it is much better than older 450 PRO helis. Great improvement from GARTT production... The only "problem" that isn't realy a problem but a must do is mesh well all TT umbrella gaers with apropriate shims to make them fit well, but not too tight eather - like all gears in general... All the rest was OK, use threadloch everywhere and grease on thrust bearings main head grips and tail grips as well. Wil tell more after first few flights... Bye
Quality
Value
Overall
Quality
Value
Overall
Finally got this bird up in the air and after building it and flying I can say the quality is great. Everything fit together nicely. I always pull all the screws out of the preassembled parts and they were mostly thread locked so I probably would have been ok not doing this. flying was perfect, I didn't have to adjust anything after the 1st flight, everything was just spot on after setup on the bench. I used the ZYX - S2 and it held solid. This is a quite a difference from the HK kits on this site as I had to buy a lot of Align parts for the tail and a new swash as its quality was quite poor (RIP).
Quality
Value
Overall
Quality
Value
Overall
il miglior elicottero classe 450 lavorazione perfetta piccolo neo viti un po deboli e alcune con testa torx
Quality
Value
Overall
Quality
Value
Overall
good I like it was abit battered by the post but all parts were ok
Quality
Value
Overall
Quality
Value
Overall
I just got my package today. Took it out of the box and I can tell you right now, very high quality! It is by far, one of the best craftsmanship work I have seen on a heli. Fantastic job HK!!!!! My favorite place to order everything I need for my heli's. Do yourself a favor, get one, you will not regret it!
Quality
Value
Overall
Quality
Value
Overall
seemingly nice product, which was quite fun to assemble. most parts were already put together, but take these apart, and check for proper lubrication and loctite.

the overall quality is ok, but there are a few bad parts:
- the ball links are finished quite poorly and look a bit soft. also the ball links on the tail control rod tend to bind.
- the main gear is made of low quality plastic, it started showing wear on the first spool (even though i checked the motor gear mesh three times)
- also, most gears look cheap, especially the umbrella gears for the TT drive
- the dfc arms tend to bind to the blade grips
- the canopy is a bit of a slapdash job, a little misshapen with painting blemishes (but nice enough for the money)
- one of the TT bearings wobbles when rotated

i suggest replacing all gears asap, and double (triple) check everyting for binding and unwanted shifting. my maiden finished with a bad crash caused by a TT umbrella gear shifting, getting chewed up, and me losing tail control totally. (2 servos broken, tail boom bent, blades broken, main shaft bent, featherin shaft bent, etc)



Quality
Value
Overall
Quality
Value
Overall
Just received the Assault 450L For the price this kit is amazing. Excellent QC very impressed with this kit. Front and rear tail gears mesh really well very smooth rotation no rough spots. Tail is sweet thrust bearing in tail holder. The cf frame on mine is flawless. Even the cnc parts are great very little machine marks. Head and swash plate also of good quality.Fiber glass canopy has very nice finish. I'm telling you this kit is great. The only thing that you might consider replacing would be the main gear. That is all I will replace..
Quality
Value
Overall
Upload
Videos
  • Assault 450L Helicopter

Upload
Files

esc
battery
servo
motor
acc

产品标签

使用空格分隔标签。使用单引号(')标注词组。